Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / Details1/4" flat angle spray nozzle with external BSPT thread for mounting, e.g., with a lance (connection via coupling). Material: stainless steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVentilated extension lance with thermal insulation, designed for high-pressure washer. Length: 400 mm. Connections: (inlet) GZ 1/4" BSP / (outlet) GZ 1/4" BSP. Working pressure: up to 310 bar. Maximum pressure: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAKBO BIG FLOW hot water gun with increased flow rate. Made of stainless steel, insulated trigger, EPDM rubber covers, Viton seals. Use with hot water requires special caution. Not intended for steam! Connection: 1/2" BSP. Working pressure: 24 bar. Flow rate: 120 l/min. Operating temperature: up to +95°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsA steel wire spiral protecting the fitting from external mechanical damage, which extends the lifespan of the hose.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part long adapter for high-pressure cleaning devices with metric connection M22x1.5. With O-ring on both sides of the connection. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFoam lance assembled with a quick-connect plug DN 11.8, without nozzle. Connection: (inlet) plug DN 11.8 / (outlet) G 1/2" BSP. Available lengths: 22 cm, 50 cm, and 60 cm. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure water gun SG35 with lance MT8 for industrial applications. Suitable for hot and cold water. The lever mechanism does not require the operator to exert significant force, resulting in comfortable and pleasant operation. The outlet part of the lance is finished with an internal metric thread M22x1.5. The lance is made of stainless steel or galvanized material. The gun is also available with a swivel connection for installation. Housing material: high-strength plastic. Working pressure: up to 310 bar. Maximum pressure: 350 bar. Flow rate: 45 l/min. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter for mounting a lance with a foam gun and spraying with GZ 1/2" BSP at the outlet. Material: stainless steel. Working pressure: 24 (maximum working pressure of the gun with the lance connection).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, ergonomic white shower nozzle for spraying vegetables, fruits, fish, work surfaces in the food industry, large kitchens, and catering establishments. Made of FDA-compliant polyamide (PA66), with an internal valve made of stainless steel. Seals made of EPDM. Connection: 1/2" BSP male thread. Working pressure: up to 8 bar. Operating temperature: up to +60°C. Weight: 0.3 kg.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable nozzle with variable flow designed for spraying and washing. Flow regulation is achieved by rotation. Connection: hose end 15/20 mm. Working pressure: up to 25 bar. Material: brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle designed for washing and cleaning with water, with a flow regulated by a rotating head. The flow can be completely shut off by fully tightening the head. The mechanism is made of brass, with covers and seals made of EPDM rubber. Available with handles in blue, red, and white (AK-MSHH4-BK - version without handle, GZ 1/2" BSP). When working with hot water, special precautions must be taken. Not intended for steam! Connection: GW 1/2" BSP. Maximum working pressure: 16 bar. Maximum operating temperature: +80°C. Flow rate: 110 l/min (5 bar), 150 l/min (16 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for PROFICLEAN 416 gun with M21 x 1.5 thread (o-ring). Standard nozzle in the gun Ø 2 mm. Available diameters: 2 mm, 4 mm, or 5.5 mm (L = 13 mm, with thread) and 4 mm in lengths of 28 mm and 58 mm. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable nozzle with regulated flow intended for spraying and washing. Flow regulation is achieved by rotation. Connection: NiTO 1/2" plug. Working pressure: up to 25 bar. Material: chrome-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight water gun AKBO made of PA66 polyamide reinforced with fiberglass, stainless steel valve and lever, EPDM rubber cover, seals made of EPDM and Viton (FDA). It features an adjustable outlet nozzle, smooth flow regulation, and a trigger lock. Complies with FDA requirements. Used in the food industry. Working pressure: 12 bar. Maximum operating temperature: +50°C. Weight: approx. 0.48 kg. Flow rate: 48 l/min (12 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable nozzle with variable flow designed for spraying and washing. Flow regulation is achieved by rotation. Connection: 3/4" BSP female thread. Working pressure: up to 25 bar. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable nozzle with variable flow designed for spraying and washing. Flow regulation is achieved by rotation. Connection: NiTO 1/2" plug. Working pressure: up to 25 bar. Material: chrome-plated brass, plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable nozzle with variable flow designed for spraying and washing. Flow regulation is achieved by rotation. Connection: NiTO 3/4" plug. Working pressure: up to 25 bar. Material: chrome-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter lance/nozzle with NBR O-ring included. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter lance/nozzle with internal thread on both sides. Material: carbon steel, galvanized. Working pressure: up to 350 bar. Nominal flow rate: 60 l/min. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProtective nozzle adapter with internal metric thread M18x1.5. Material: brass. Working pressure: up to 280 bar. Operating temperature: up to +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFoam nozzle in a white nylon cover with a quick coupling plug DN 11.8, compatible with guns and ball valves equipped with quick coupling sockets in the outlet section. Material: stainless steel (nozzle), nylon (cover).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle for MULTICLEAN gun with M21 x 1.5 thread (o-ring on the gun side). Standard nozzle in the gun Ø 2 mm. Available diameters: 2 mm and 4 mm. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat nozzle made of plastic intended for foaming at low pressure - 2.5 bar (best results are achieved at 3.5 ÷ 4 bar). It can also be used for spraying and rinsing cleaned surfaces. Connection: 1/4" BSP. Nozzle material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat nozzle made of plastic intended for foaming at low pressure - 2.5 bar (best results are achieved at 3.5 ÷ 4 bar). It can also be used for spraying and rinsing cleaned surfaces. Connection: quick coupling plug DN 11.8 (stainless steel). Nozzle material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary nozzle RM for unblocking sewage without a central hole, additional 2 side holes. Connection: GW 1/4" BSP. Material: stainless steel (body), brass (rotor). Working pressure: up to 150 bar. Diameter: 19 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDispensing nozzles for the NitoClean system, MiniMix, MinSpray, and similar devices. The set includes 5 pieces. Available in various colors.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHYPERJET PLUS nozzle for lance. Material: brass, stainless steel, and plastic. Working pressure: up to 250 bar. Operating temperature: up to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary head. Material: brass, stainless steel, and plastic. Working pressure: up to 255 bar. Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMH rotary head with the highest resistance, designed for MT1, MT2, MT3, and MT6 lance types. Material: stainless steel. Working pressure: up to 500 bar. Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure water quick coupling NiTO socket with external metric thread. Available version with long thread. Material: chrome-plated brass. Working pressure: 180 bar. Operating temperature: +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMH-24 quick coupling socket with internal BSP thread for lances, guns, and high-pressure hoses. Material: stainless steel. Working pressure: 400 bar. Operating temperature: +160°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with internal thread for high-pressure washers. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal threaded end for high-pressure washers. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary end AK with external BSPT tapered thread without flange. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where rotation of the gun is required due to its operation. Material: AISI 316 steel. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary end AK with external BSPT tapered thread without anti-kink spring. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where rotation of the gun is required due to its operation. Material: AISI 316 steel. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAK end fitting with internal BSP thread and a 200 mm anti-kink spring. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where bending of the hose is required due to the operation of the gun. The spring provides additional protection for the hose. Material: AISI 316 steel. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAK end with external BSP thread and anti-kink spring, 200 mm in length. Designed for installation in industrial hoses, particularly in washing hoses at the connection point with the water gun, where bending of the hose is required due to the operation of the gun. The spring provides additional protection for the hose. Material: AISI 316 steel. Working pressure: up to 40 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsChassis washing lance. Due to its length and bent tip, it is ideal for washing chassis as well as other hard-to-reach areas. The outlet part of the lance is finished with a 1/4" NPT internal thread. Working pressure: up to 280 bar. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMT2 type lance with thermal insulation intended for high-pressure washer. Connections: (inlet) GW M22x1.5 / (outlet) GZ M18x1.5. Working pressure: up to 250 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMT3 type thermal insulation lance intended for high-pressure washer. Connection: (inlet) GZ 1/4" BSP / (outlet) GW 1/4" NPT. Working pressure: up to 280 bar. Flow rate: 40 l/min. Operating temperature: up to +150°C. Material: stainless steel.
