Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug for cleaning hoses and pipes intended for ULTRACLEAN devices. Removes fine particles of bulk contaminants from the inner surfaces of hoses and pipes. Cleaning involves shooting the plug using compressed air. Available in diameter ranges of 2 ÷ 95 mm. Possibility of sale in bulk packaging (the number of pieces in bulk packaging depends on the outer diameter of the plug).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHeat shrink end caps are designed to protect the hose after prior cleaning. They eliminate the possibility of re-contaminating the hose, which is problematic and occurs with traditional methods (ill-fitting plastic plugs or caps inserted or screwed into the ends can leave particles generated by shearing the material with the thread). Heat shrink end caps leave no contaminants behind. As long as they are on the ends of the previously cleaned hose, we are guaranteed that it remains clean. Removing such a cap involves pulling the black strip (located along the cap) towards the end of the hose. The caps are for single use only and cannot be reused.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCleaning plug for hoses and pipes intended for ULTRACLEAN devices. Used where a layer of scale, rust, and other contaminants accumulates on the inner surface of hoses and pipes. Cleaning involves propelling the plug using compressed air. Available diameter range 6 ÷ 110 mm. Possibility of sale in bulk packaging (the number of pieces in bulk packaging depends on the outer diameter of the plug).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCleaning nozzle for metric pipes, for use with ULTRACLEAN devices. The sealing of the pipe with the nozzle occurs between the front surface of the pipe and the limiter located inside the nozzle. Designed for external diameters and wall thicknesses of metric pipes. Pipe size range: from 3 mm to 50 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCleaning nozzle for hoses, to be used with ULTRACLEAN devices. The nozzle can also be used for cleaning pipes, thick-walled tubes, and joints. This is the most popular type of nozzle. Size: 1/4" ÷ 2".
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFFORX nozzle for cleaning pipes with flat seal couplings with sealing ring. Size: 6 mm (1/4").- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSmall, lightweight, and handy tool for microperforating the outer layer of hoses with a diameter of up to 2". It allows for very quick microperforation, especially in situations where access to the hose is limited. An ideal tool for thermoplastic hoses. Dimensions: 260x45x30 mm. Weight 0.6 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple device for cleaning hoses and pipes with compressed air. It has two nozzles made of plastic, one for hoses 3/16" to 1" and the other for hoses 1" to 2". Pressing the hose against the nozzle opens the air valve, allowing for hose cleaning. Air pressure: min. 6 bar. Pneumatic system connection: 1/2" BSP.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for oil filling and suction and filtration of oil from press tanks, machines, and hydraulic systems. Parameters: electric drive 0.55 kW, 400V; pump 39 l/min; filter 25 µm (also available in 10 and 20 µm); suction filter 125 µm. Weight: 60 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for oil filling, suction, and filtration from press tanks, machines, and hydraulic systems. Parameters: electric drive 400V, 0.55kW; pump 39 l/min; filter 25 µm (also available in 10 and 20 µm); suction filter 125 µm; electronic oil flow meter; electronic filter replacement indicator. Weight: 87 kg.
