Is the 90Â° elbow with BSP female thread, cast iron, type 90/6 suitable for use at 300Â°C and 20 bar pressure?

Yes. The 90Â° elbow with BSP female thread, cast iron, type 90/6 is specified for operating temperatures up to +300Â°C and a working pressure of 20 bar at temperatures up to +300Â°C. Therefore it is suitable for use at 300Â°C and 20 bar, provided installation and service conditions match the productâs rating (correct thread/mating components, proper sealing, and compliance with relevant standards and safety factors). Verify compatibility of connected materials, joint integrity, and any applicable allowances for transient pressures or thermal cycling before final installation.

Can the 90Â° elbow with BSP female thread, cast iron, type 90/6 be used continuously at 25 bar up to 120Â°C and intermittently at 20 bar up to 300Â°C?

Yes. The 90Â° elbow with BSP female thread, cast iron, type 90/6 may be used continuously at 25 bar up to 120Â°C and intermittently at 20 bar up to 300Â°C, per the provided specifications stating operating temperature up to +300Â°C with working pressure 25 bar (up to +120Â°C) and 20 bar (up to +300Â°C). Ensure system design, installation, and applicable standards/compatibility (media, thermal cycling, joint integrity) are checked for safe operation.

Can the 90Â° elbow with BSP female thread, cast iron, type 90/6 be pressure-tested for 25 bar at room temperature before service?

Yes. The 90Â° elbow with BSP female thread, cast iron, type 90/6 can be pressure-tested to 25 bar at room temperature before service. The productâs specified working pressure is 25 bar up to +120Â°C; room temperature is well below that limit, so the fitting is rated for that pressure under test conditions. Ensure the test is performed following applicable pressure-testing standards and procedures (appropriate test medium, controlled ramp-up, adequate support and end fittings, leak detection) and do not exceed the specified limits for threaded connections. If the elbow has been modified, damaged, or assembled with nonâspecified mating parts, inspect and verify condition before testing.

90° elbow with BSP female thread, cast iron, type 90/6

Additional information

Material	CS – steel (cast iron)

90° elbow with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EE-906-04	90° elbow with GW / GW BSP 1/4", galvanized cast iron.	-	25	In stock	Enquiry
EE-906-06	90° elbow with GW / GW BSP 3/8", galvanized cast iron.	-	25	In stock	Enquiry
EE-906-08	90° elbow with GW / GW BSP 1/2", galvanized cast iron.	-	25	In stock	Enquiry
EE-906-12	90° elbow with GW / GW BSP 3/4", galvanized cast iron.	-	25	In stock	Enquiry
EE-906-16	90° elbow with GW / GW BSP 1", galvanized cast iron.	-	25	In stock	Enquiry
EE-906-20	90° elbow with GW / GW BSP 1.1/4", galvanized cast iron.	-	25	In stock	Enquiry
EE-906-24	90° elbow with GW / GW BSP 1.1/2", galvanized cast iron.	-	25	In stock	Enquiry
EE-906-32	90° elbow with GW / GW BSP 2", galvanized cast iron.	-	25	In stock	Enquiry
EE-906-40	90° elbow with GW / GW BSP 2.1/2", galvanized cast iron.	-	25	In stock	Enquiry
EE-906-48	90° elbow with GW / GW BSP 3", galvanized cast iron.	-	25	In stock	Enquiry
EE-906-64	90° elbow with GW / GW BSP 4", galvanized cast iron.	-	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° elbow with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).