Can the WEO 90Â° plug with hose end, hardened steel, 714 series, handle continuous operation at 350 bar with 3/4" hoses without reducing service life?

Yes . the WEO 90Â° plug with hose end, hardened steel, 714 series can operate continuously at 350 bar on 3/4" hoses without requiring a reduction in service life, provided operating conditions match the product specifications. Key points from the description: - Rated working pressure: 350 bar for hose sizes up to 3/4". - Compatible hose types: 1SN, 2SN, 1SC, 2SC (these must be used). - Material: hardened steel, suitable for high-pressure service. - Operating temperature: -30Â°C to +100Â°C (stay within this range to avoid accelerated wear). - The swivel freedom after connection reduces hose twisting and installation stress, helping longevity. Caveats: ensure correct hose selection (max 3/4"), proper assembly, clean hydraulic fluid, correct system temperature, and routine maintenance. Any operation outside the specified pressure, temperature, hose type, or with poor assembly/contamination may reduce service life.

Does the WEO 90Â° plug with hose end, hardened steel, 714 series allow swivel movement to prevent hose twisting during installation?

Yes. The WEO 90Â° plug with hose end, hardened steel, 714 series allows swivel movement after connection - the plug has freedom of movement in the socket, which prevents the hoses from twisting during installation. Itâs designed for hoses type 1SN, 2SN, 1SC, 2SC, with working pressure up to 350 bar (up to 3/4") and 250 bar (1"), made of hardened steel, operating from -30Â°C to +100Â°C.

Is the WEO 90Â° plug with hose end, hardened steel, 714 series compatible with hoses 1SC and 2SC at 250 bar?

Yes. The WEO 90Â° plug with hose end, hardened steel, 714 series is compatible with 1SC and 2SC hoses at 250 bar. The product is designed for hose types 1SN, 2SN, 1SC, 2SC and lists a working pressure of 250 bar for hose size 1", which covers the 1SC/2SC applications at that pressure.

Plug 90° WEO with fittings for hose, case-hardened steel, series 714

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Plug 90° WEO with fittings for hose for use in hydraulic systems where there is not enough space, to install line in the traditional way. Po connection plug has freedom of movement in the socket, co zapobiega screwing lines in trakcie installation. intended for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for a hose size up to 3/4″), 250 bar (for a hose size 1″). Material: case-hardened steel. Operating temperature: from -30°C to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CJ-H-147140404	Fitting 90° plug WEO 1/4", hose 1/4", 350 bar	6	350	In stock	Enquiry
CJ-H-147140604	Fitting 90° plug WEO 3/8", hose 1/4", 350 bar	6	350	In stock	Enquiry
CJ-H-147140605	Fitting 90° plug WEO 3/8", hose 5/16", 350 bar	8	350	In stock	Enquiry
CJ-H-147140606	Fitting 90° plug WEO 3/8", hose 3/8", 350 bar	10	350	In stock	Enquiry
CJ-H-147140806	Fitting 90° plug WEO 1/2", hose 3/8", 350 bar	10	350	In stock	Enquiry
CJ-H-147140808	Fitting 90° plug WEO 1/2", hose 1/2", 350 bar	12	350	In stock	Enquiry
CJ-H-147141208	Fitting 90° plug WEO 3/4", hose 1/2", 350 bar	12	350	In stock	Enquiry
CJ-H-147141210	Fitting 90° plug WEO 3/4", hose 5/8", 350 bar	16	350	In stock	Enquiry
CJ-H-147141212	Fitting 90° plug WEO 3/4", hose 3/4", 350 bar	20	350	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug 90° WEO with fittings for hose for use in hydraulic systems where there is not enough space, to install line in the traditional way. Po connection plug has freedom of movement in the socket, co zapobiega screwing lines in trakcie installation. intended for hoses type 1SN, 2SN, 1SC, 2SC. Working pressure: 350 bar (for a hose size up to 3/4″), 250 bar (for a hose size 1″). Material: case-hardened steel. Operating temperature: from -30°C to +100°C.