Does the BANJO elbow body, type R28, support repeated assembly/disassembly without losing pneumatic or mechanical sealing?

Yes. The BANJO elbow body, type R28, is designed for repeated assembly and disassembly without losing pneumatic or mechanical sealing. The product description explicitly states it is "easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic side." Constructed of plastic with NBR sealing, rated for 12 bar working pressure, compatible with vacuum and air, and operable from â20Â°C to +60Â°C, it is suitable for repeated reconnections while maintaining seal integrity when used within these specified conditions.

Can the BANJO elbow body, type R28, be used with different series D screw sizes without compromising the seal?

BANJO elbow body, type R28 is designed for screws of series D; its description emphasizes easy, quick assemblies without loss of sealing on mechanical and pneumatic sides. Using different series D screw sizes (i.e., variants within series D) should not compromise the seal provided the screws conform to the intended series D dimensions and threading, the NBR sealing surfaces are intact, and operating conditions remain within specified limits (12 bar, -20Â°C to +60Â°C, vacuum/air). Using screws from a different series (nonâD) or mismatched dimensions may impair sealing and is not recommended.

Is the BANJO elbow body, type R28, suitable for vacuum applications up to 12 bar without seal degradation?

Yes. The BANJO elbow body, type R28 is specified for use with vacuum and air, has a working pressure rating of 12 bar, and uses NBR seals. According to the provided description it is intended for pneumatic systems and designed for multiple assemblies without loss of sealing on the mechanical and pneumatic side. Given that NBR (nitrile rubber) is commonly compatible with vacuum and compressed air within the stated operating temperature range (â20Â°C to +60Â°C), the R28 elbow body is suitable for vacuum applications up to 12 bar without expected seal degradation when used within the specified pressure, temperature, and media limits. Notes/conditions: ensure the actual vacuum level, any presence of aggressive gases, dynamic cycling, and installation practices are within the stated limits; if exposure to oils/chemicals or temperatures outside â20Â°Câ¦+60Â°C is possible, verify NBR compatibility or consult the manufacturer for confirmation.

BANJO elbow body, type R28

All products, Push-in fittings/

Additional information

Material	P – material (plastic)

Banjo elbow body, type R28, for screws of series D, intended for connections of pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic side. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2012102	BANJO R28 angled connector 4 mm hose, for BSP 1/8" screw, plastic	-	12	In stock	Enquiry
MW-2012104	BANJO R28 angled connector 5 mm hose, for BSP 1/8" screw, plastic	-	12	In stock	Enquiry
MW-2012106	BANJO R28 angled connector 6 mm hose, for BSP 1/8" screw, plastic	-	12	In stock	Enquiry
MW-2012107	BANJO angle connector R28 hose 6 mm, for BSP screw 1/4", plastic	-	12	In stock	Enquiry
MW-2012108	BANJO angle connector R28 hose 8 mm, for BSP screw 1/8", plastic	-	12	In stock	Enquiry
MW-2012109	BANJO angle connector R28 hose 8 mm, for BSP screw 1/4", plastic	-	12	In stock	Enquiry
MW-2012110	BANJO angle connector R28 hose 8 mm, for BSP screw 3/8", plastic	-	12	In stock	Enquiry
MW-2012111	BANJO angle connector R28 hose 10 mm, for BSP screw 1/4", plastic	-	12	In stock	Enquiry
MW-2012112	BANJO angle connector R28 hose 10 mm, for BSP screw 3/8", plastic	-	12	In stock	Enquiry
MW-2012113	BANJO R28 angled connector 12 mm hose, for BSP 1/4" screw, plastic	-	12	In stock	Enquiry
MW-2012114	BANJO angle connector R28 hose 12 mm, for BSP screw 3/8", plastic	-	12	In stock	Enquiry
MW-2012115	BANJO angle connector R28 hose 12 mm, for BSP screw 1/2", plastic	-	12	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Banjo elbow body, type R28, for screws of series D, intended for connections of pipes and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic side. Material: plastic. Working pressure: 12 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +60°C. Sealing: NBR.