What load capacity (kG/100 bar) and stroke options are available for the Hydraulic piston cylinder, double acting, type DE?

Hydraulic piston cylinder, double acting, type DE Load capacity and stroke options: - Load capacity: depends on piston diameter and pressure; with maximum working pressure up to 180 bar, theoretical axial force = piston area Ã pressure. Available piston diameters: Ã32 mm to Ã120 mm. For practical reference in kG/100 bar (kg per 100 bar), approximate values by diameter: - Ã32 mm â 8.04 kg per 100 bar - Ã40 mm â 12.56 kg per 100 bar - Ã50 mm â 19.63 kg per 100 bar - Ã63 mm â 31.17 kg per 100 bar - Ã80 mm â 50.27 kg per 100 bar - Ã100 mm â 78.54 kg per 100 bar - Ã120 mm â 113.10 kg per 100 bar - Stroke options: working stroke from 50 mm up to 1000 mm (selectable depending on application). Notes: Final selectable load capacity must be chosen based on the specific piston diameter and operating pressure for your application. Repair kits for seals available on request.

What repair kits and seal materials are available for the Hydraulic piston cylinder, double acting, type DE?

Hydraulic piston cylinder, double acting, type DE - available repair kits and seal materials: - Standard repair kits (available on request) include all common wear parts: piston seals, rod seals, wipers, O-rings and backup rings sized for Ã32âÃ120 mm diameters and strokes 50â1000 mm. - Seal materials offered: PU (polyurethane) for high wear resistance, POM (polyoxymethylene) for low friction components, and NBR (nitrile rubber) for general oil resistance. - Kits matched to operating conditions: materials rated for hydraulic oil, temperatures â30Â°C to +110Â°C, and pressures up to 180 bar. - Custom kits available for specific rod coatings (chrome-plated) or component materials (carbon steel, cast iron gland) and for special load/stroke requirements.

What are the recommended operating temperatures and fluid compatibility for the Hydraulic piston cylinder, double acting, type DE?

Hydraulic piston cylinder, double acting, type DE. Recommended operating temperatures and fluid compatibility: - Operating temperature range: -30Â°C to +110Â°C. - Compatible fluids: hydraulic oil (standard). Sealing materials used (PU, POM, NBR) indicate suitability primarily for mineral-based hydraulic oils; compatibility with other fluids (water-glycol, phosphate esters, bio-hydraulics) should be verified against seal material chemical resistance and manufacturer guidance. - Note on extremes: prolonged exposure near upper limit (+110Â°C) or lower limit (-30Â°C) may affect seal life and performance; select appropriate seal compounds or repair kits if operating frequently at temperature extremes. - Materials: carbon steel and cast iron components with chrome-plated rod; corrosion protection limitedâconsider fluid and environmental compatibility to avoid corrosion effects.

Hydraulic piston cylinder, double acting, type DE

All products, Hydraulic cylinders/

Additional information

Maximum operating temperature [°C]	110
Minimum operating temperature [°C]	-30
Standard length [m]	50, 60 / 120

Double-acting piston actuator with a screw-on gland, intended for hydraulic power systems. Depending on the application, load capacity (expressed in kG/100 bar) and stroke of the actuator must be selected. Repair kits for seals available upon request. Piston diameter: Ø 32 mm to Ø 120 mm. Working stroke: from 50 mm to 1000 mm. Maximum working pressure: up to 180 bar. Medium: hydraulic oil. Material: carbon steel, cast iron (gland). Protective coating: chrome-plated rod, the rest uncoated. Sealing: PU, POM, NBR. Operating temperature: from -30°C to +110°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HS-DE2032050	Hydraulic actuator double-acting O 20/32 mm, stroke 50 mm	-	180	In stock	Enquiry
HS-DE2032100	Hydraulic actuator double-acting O 20/32 mm, stroke 100 mm	-	180	In stock	Enquiry
HS-DE2032150	Hydraulic actuator double-acting diameter 20/32 mm, stroke 150 mm	-	180	In stock	Enquiry
HS-DE2032200	Hydraulic actuator double-acting O 20/32 mm, stroke 200 mm	-	180	In stock	Enquiry
HS-DE2032250	Hydraulic actuator double-acting O 20/32 mm, stroke 250 mm	-	180	In stock	Enquiry
HS-DE2032300	Hydraulic actuator double-acting O 20/32 mm, stroke 300 mm	-	180	In stock	Enquiry
HS-DE2032400	Hydraulic actuator double-acting O 20/32 mm, stroke 400 mm	-	180	In stock	Enquiry
HS-DE2540100	Hydraulic actuator double-acting O 25/40 mm, stroke 100 mm	-	180	In stock	Enquiry
HS-DE2540150	Hydraulic actuator double-acting O 25/40 mm, stroke 150 mm	-	180	In stock	Enquiry
HS-DE2540200	Hydraulic actuator double-acting O 25/40 mm, stroke 200 mm	-	180	In stock	Enquiry
HS-DE2540250	Hydraulic actuator double-acting O 25/40 mm, stroke 250 mm	-	180	In stock	Enquiry
HS-DE2540300	Hydraulic actuator double-acting O 25/40 mm, stroke 300 mm	-	180	In stock	Enquiry
HS-DE2540400	Hydraulic actuator double-acting O 25/40 mm, stroke 400 mm	-	180	In stock	Enquiry
HS-DE2540500	Hydraulic actuator double-acting O 25/40 mm, stroke 500 mm	-	180	In stock	Enquiry
HS-DE3050100	Hydraulic actuator double-acting O 30/50 mm, stroke 100 mm	-	180	In stock	Enquiry
HS-DE3050150	Hydraulic actuator double-acting O 30/50 mm, stroke 150 mm	-	180	In stock	Enquiry
HS-DE3050200	Hydraulic double-acting cylinder, diameter 30/50 mm, stroke 200 mm	-	180	In stock	Enquiry
HS-DE3050250	Hydraulic actuator double-acting O 30/50 mm, stroke 250 mm	-	180	In stock	Enquiry
HS-DE3050300	Hydraulic actuator double-acting diameter 30/50 mm, stroke 300 mm	-	180	In stock	Enquiry
HS-DE3050400	Hydraulic actuator double-acting O 30/50 mm, stroke 400 mm	-	180	In stock	Enquiry
HS-DE3050500	Hydraulic actuator double-acting diameter 30/50 mm, stroke 500 mm	-	180	In stock	Enquiry
HS-DE3050600	Hydraulic actuator double-acting O 30/50 mm, stroke 600 mm	-	180	In stock	Enquiry
HS-DE3050700	Hydraulic actuator double-acting O 30/50 mm, stroke 700 mm	-	180	In stock	Enquiry
HS-DE3050800	Hydraulic actuator double-acting O 30/50 mm, stroke 800 mm	-	180	In stock	Enquiry
HS-DE3050900	Hydraulic actuator double-acting O 30/50 mm, stroke 900 mm	-	180	In stock	Enquiry
HS-DE3060100	Hydraulic actuator double-acting O 30/60 mm, stroke 100 mm	-	180	In stock	Enquiry
HS-DE3060150	Hydraulic actuator double-acting diameter 30/60 mm, stroke 150 mm	-	180	In stock	Enquiry
HS-DE3060200	Hydraulic actuator double-acting O 30/60 mm, stroke 200 mm	-	180	In stock	Enquiry
HS-DE3060250	Hydraulic actuator double-acting O 30/60 mm, stroke 250 mm	-	180	In stock	Enquiry
HS-DE3060300	Hydraulic actuator double-acting O 30/60 mm, stroke 300 mm	-	180	In stock	Enquiry
HS-DE3060350	Hydraulic actuator double-acting O 30/60 mm, stroke 350 mm	-	180	In stock	Enquiry
HS-DE3060400	Hydraulic actuator double-acting O 30/60 mm, stroke 400 mm	-	180	In stock	Enquiry
HS-DE3060450	Hydraulic actuator double-acting O 30/60 mm, stroke 450 mm	-	180	In stock	Enquiry
HS-DE3060500	Hydraulic actuator double-acting O 30/60 mm, stroke 500 mm	-	180	In stock	Enquiry
HS-DE3060600	Hydraulic actuator double-acting O 30/60 mm, stroke 600 mm	-	180	In stock	Enquiry
HS-DE3060700	Hydraulic actuator double-acting O 30/60 mm, stroke 700 mm	-	180	In stock	Enquiry
HS-DE4070200	Hydraulic actuator double-acting O 40/70 mm, stroke 200 mm	-	180	In stock	Enquiry
HS-DE4070250	Hydraulic actuator double-acting O 40/70 mm, stroke 250 mm	-	180	In stock	Enquiry
HS-DE4070300	Hydraulic actuator double-acting O 40/70 mm, stroke 300 mm	-	180	In stock	Enquiry
HS-DE4070350	Hydraulic actuator double-acting O 40/70 mm, stroke 350 mm	-	180	In stock	Enquiry
HS-DE4070400	Hydraulic actuator double-acting O 40/70 mm, stroke 400 mm	-	180	In stock	Enquiry
HS-DE4070450	Hydraulic actuator double-acting O 40/70 mm, stroke 450 mm	-	180	In stock	Enquiry
HS-DE4070500	Hydraulic actuator double-acting O 40/70 mm, stroke 500 mm	-	180	In stock	Enquiry
HS-DE4070600	Hydraulic actuator double-acting O 40/70 mm, stroke 600 mm	-	180	In stock	Enquiry
HS-DE4070700	Hydraulic actuator double-acting O 40/70 mm, stroke 700 mm	-	180	In stock	Enquiry
HS-DE4080200	Hydraulic actuator double-acting O 40/80 mm, stroke 200 mm	-	180	In stock	Enquiry
HS-DE4080250	Hydraulic actuator double-acting O 40/80 mm, stroke 250 mm	-	180	In stock	Enquiry
HS-DE4080300	Hydraulic actuator double-acting O 40/80 mm, stroke 300 mm	-	180	In stock	Enquiry
HS-DE4080350	Hydraulic actuator double-acting O 40/80 mm, stroke 350 mm	-	180	In stock	Enquiry
HS-DE4080400	Hydraulic actuator double-acting O 40/80 mm, stroke 400 mm	-	180	In stock	Enquiry
HS-DE4080500	Hydraulic actuator double-acting O 40/80 mm, stroke 500 mm	-	180	In stock	Enquiry
HS-DE4080600	Hydraulic actuator double-acting O 40/80 mm, stroke 600 mm	-	180	In stock	Enquiry
HS-DE4080700	Hydraulic actuator double-acting O 40/80 mm, stroke 700 mm	-	180	In stock	Enquiry
HS-DE50100300	Hydraulic actuator double-acting diameter 50/100 mm, stroke 300 mm	-	180	In stock	Enquiry
HS-DE50100400	Hydraulic actuator double-acting O 50/100 mm, stroke 400 mm	-	180	In stock	Enquiry
HS-DE50100500	Hydraulic actuator double-acting O 50/100 mm, stroke 500 mm	-	180	In stock	Enquiry
HS-DE50100700	Hydraulic actuator double-acting O 50/100 mm, stroke 700 mm	-	180	In stock	Enquiry
HS-DE50100900	Hydraulic actuator double-acting O 50/100 mm, stroke 900 mm	-	180	In stock	Enquiry
HS-DE701201000	Hydraulic actuator double-acting O 70/120 mm, stroke 1000 mm	-	180	In stock	Enquiry
HS-DE70120500	Hydraulic actuator double-acting O 70/120 mm, stroke 500 mm	-	180	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Double-acting piston actuator with a screw-on gland, intended for hydraulic power systems. Depending on the application, load capacity (expressed in kG/100 bar) and stroke of the actuator must be selected. Repair kits for seals available upon request. Piston diameter: Ø 32 mm to Ø 120 mm. Working stroke: from 50 mm to 1000 mm. Maximum working pressure: up to 180 bar. Medium: hydraulic oil. Material: carbon steel, cast iron (gland). Protective coating: chrome-plated rod, the rest uncoated. Sealing: PU, POM, NBR. Operating temperature: from -30°C to +110°C.