Hose for cement, sand, gravel, feed, seed VOLGA SUPER®
Strong suction and discharge hose designed for the transport of dry abrasive substances. The inner layer is smooth, antistatic, and highly resistant to abrasion (50±5 mm³ according to ISO 4649, formerly DIN 53516). Built-in copper wire that, when grounded (or connected to a grounded end), dissipates electric charges. The outer layer is resistant to weather conditions and ozone. The hose is intended for the transport of dry, highly abrasive substances: cement, sand, gravel, etc. Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 6 bar. Vacuum: from 0.8 bar to 0.9 bar – depending on the hose diameter. Operating temperature: -30°C to +70°C.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| IV-VOLGA-S-051 | VOLGA SUPER hose 51x69 mm | 50 | 6 | |
| IV-VOLGA-S-060 | VOLGA SUPER hose 60x76 mm | 60 | 6 | |
| IV-VOLGA-S-063 | VOLGA SUPER hose 63.5x79.5 mm | 65 | 6 | |
| IV-VOLGA-S-070 | VOLGA SUPER hose 70x86 mm | 70 | 6 | |
| IV-VOLGA-S-076 | VOLGA SUPER hose 76x95 mm | 75 | 6 | |
| IV-VOLGA-S-080 | VOLGA SUPER hose 80x99 mm | 80 | 6 | |
| IV-VOLGA-S-085 | VOLGA SUPER hose 85x105 mm | 80 | 6 | |
| IV-VOLGA-S-090 | VOLGA SUPER hose 90x110 mm | 90 | 6 | |
| IV-VOLGA-S-102 | VOLGA SUPER hose 102x124 mm | 100 | 6 | |
| IV-VOLGA-S-110 | VOLGA SUPER hose 110x134 mm | 110 | 6 | |
| IV-VOLGA-S-125 | VOLGA SUPER hose 125x151 mm | 125 | 6 | |
| IV-VOLGA-S-152 | VOLGA SUPER hose 152x178.5 mm | 150 | 6 | |
| IV-VOLGA-S-203 | VOLGA SUPER hose 203x232 mm | 200 | 6 | |
| IV-VOLGA-S-254 | VOLGA SUPER hose 254x290 mm | 250 | 6 |
Strong suction and discharge hose designed for the transport of dry abrasive substances. The inner layer is smooth, antistatic, and highly resistant to abrasion (50±5 mm³ according to ISO 4649, formerly DIN 53516). Built-in copper wire that, when grounded (or connected to a grounded end), dissipates electric charges. The outer layer is resistant to weather conditions and ozone. The hose is intended for the transport of dry, highly abrasive substances: cement, sand, gravel, etc. Inner layer: black NR/SBR rubber. Reinforcement: synthetic cord, steel spiral. Outer layer: black EPDM rubber. Working pressure: 6 bar. Vacuum: from 0.8 bar to 0.9 bar – depending on the hose diameter. Operating temperature: -30°C to +70°C.
Additional information
| Material | SBR/NR – a mixture of SBR and NR rubber |
|---|---|
| Maximum operating temperature [°C] | 70 |
| Minimum operating temperature [°C] | -30 |
| Vacuum resistance | yes |
| Standard length [m] | 12, 25, 30, 40, 60 |
| Reinforcement | steel spiral, synthetic cover |
Additional information
| Material | SBR/NR – a mixture of SBR and NR rubber |
|---|---|
| Maximum operating temperature [°C] | 70 |
| Minimum operating temperature [°C] | -30 |
| Vacuum resistance | yes |
| Standard length [m] | 12, 25, 30, 40, 60 |
| Reinforcement | steel spiral, synthetic cover |
