Is the CES hydraulic end, type ZMZ112 heavy series (carbon steel, zinc-nickel) compatible with standard crimping sleeves for industrial hydraulic hoses?

Yes . the CES hydraulic end, type ZMZ112, heavy series, carbon steel, zinc-nickel is compatible with standard crimping sleeves for industrial hydraulic hoses, provided the sleeve matches the hose type and dimensions. The product description explicitly states it is designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Key points to ensure compatibility: - Use a crimping sleeve specified for the hose construction (e.g., single-wire, braid, spiral) and hose inner/outer diameters. - Verify the sleeve profile and dimensions match the ZMZ112 external metric thread and the hose tail geometry. - Ensure crimping equipment and crimping specifications (crimp diameter, force, and die set) follow the hose and sleeve manufacturerâs recommendations. - The CES sealing on a 60Â° cone requires correct assembly and crimp to ensure proper sealing and pressure performance. - Corrosion-resistant zinc-nickel coating (6â10 Âµm) and carbon steel body do not affect crimp compatibility but offer enhanced corrosion protection. If you provide the hose type and sleeve model, I can confirm fitment more precisely.

Does the CES hydraulic end, type ZMZ112, heavy series, carbon steel, zinc-nickel require specific crimping pressure settings for different hose types?

Yes. The CES hydraulic end, type ZMZ112, heavy series, carbon steel, zinc-nickel requires specific crimping pressure/settings depending on the hose type. It is designed for crimping with a sleeve suitable for the hose, so correct crimping force/profile must match the hose construction (material, number of wire plies, and inner tube) and the sleeve dimensions. Use the hose and sleeve manufacturer's recommended crimping pressures, dies, and machine settings for the exact hose model. Incorrect settings can cause leaks, fitting failure, or reduced service life. If manufacturer data for ZMZ112 is not provided, follow the hose/sleeve supplierâs specifications and verify crimps by inspecting dimensions and performing pressure tests.

Can CES hydraulic end, type ZMZ112, heavy series, carbon steel, zinc-nickel be used with PTFE-lined hoses?

Yes. CES hydraulic end, type ZMZ112, heavy series, carbon steel, zinc-nickel can be used with PTFE-lined hoses, with conditions. Why itâs compatible: - CES hydraulic end, type ZMZ112 is designed for crimping into hydraulic and industrial hoses using an appropriate crimping sleeve matched to the hose type. PTFE-lined hoses are typically terminated by crimping a matched ferrule/sleeve over the hose outer braid and liner, which aligns with the intended use of this hydraulic end. - The fitting seals on a 60Â° cone (CES) with an external metric thread; this metal-to-metal cone sealing is commonly compatible with PTFE-lined assemblies when the hose termination and ferrule are designed to compress the braid and provide proper support to the PTFE liner at the sealing area. - Material and coating (carbon steel with 6â10 Âµm zinc-nickel) provide strong mechanical strength and high corrosion resistance, suitable for industrial hydraulic environments where PTFE-lined hoses are used. Key conditions and recommendations: - Use the correct crimping sleeve/ferrule specifically specified for the PTFE-lined hose manufacturer and for the ZMZ112 geometry. The sleeve must properly compress the braid and support the PTFE liner to prevent extrusion into the cone seal. - Ensure the hose inner liner and braid construction are compatible with 60Â° cone sealing and with a metal fitting; some PTFE hose constructions require a liner adaptor or insert to ensure a reliable seal and prevent liner pull-back. - Verify crimp dimensions, crimp tooling, and crimping procedure per hose and sleeve specifications. Improper crimping can cause leaks or fitting failure. - Confirm pressure rating and temperature compatibility of the assembled hose + CES hydraulic end, type ZMZ112 for your application; PTFE liners allow wide temperature/chemical compatibility, but the final assembly rating is determined by hose, braid, sleeve, and fitting together. - If in doubt, consult the hose manufacturer and perform a prototype assembly and pressure testing. Conclusion: CES hydraulic end, type ZMZ112, heavy series, carbon steel, zinc-nickel is suitable for use with PTFE-lined hoses provided you use the correct crimping sleeve/ferrule, follow the hose manufacturerâs termination instructions, and verify crimp and pressure specifications.

CES hydraulic end, type ZMZ112, heavy series, carbon steel, zinc-nickel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	10, 2

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with external metric thread, sealing on a 60° cone (CES), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZMZ112-16-04-CN	End. GZ M16x1.5, hose 1/4", 24°, heavy, Zn-Ni	6	-	In stock	Enquiry
TI-ZMZ112-18-04-CN	End. GZ M18x1.5, hose 1/4", 24°, heavy, Zn-Ni	6	-	In stock	Enquiry
TI-ZMZ112-18-05-CN	End. GZ M18x1.5, hose 5/16", 24°, heavy, Zn-Ni	8	-	In stock	Enquiry
TI-ZMZ112-18-06-CN	End. GZ M18x1.5, hose 3/8", 24°, heavy, Zn-Ni	10	-	In stock	Enquiry
TI-ZMZ112-20-05-CN	End. GZ M20x1.5, hose 5/16", 24°, heavy, Zn-Ni	8	-	In stock	Enquiry
TI-ZMZ112-20-06-CN	End. GZ M20x1.5, hose 3/8", 24°, heavy, Zn-Ni	10	-	In stock	Enquiry
TI-ZMZ112-22-06-CN	End. GZ M22x1.5, hose 3/8", 24°, heavy, Zn-Ni	10	-	In stock	Enquiry
TI-ZMZ112-24-08-CN	End. GZ M24x1.5, hose 1/2", 24°, heavy, Zn-Ni	12	-	In stock	Enquiry
TI-ZMZ112-30-10-CN	End. GZ M30x2, hose 5/8", 24°, heavy, Zn-Ni	16	-	In stock	Enquiry
TI-ZMZ112-30-12-CN	End. GZ M30x2, hose 3/4", 24°, heavy, Zn-Ni	20	-	In stock	Enquiry
TI-ZMZ112-36-12-CN	End. GZ M36x2, hose 3/4", 24°, heavy, Zn-Ni	20	-	In stock	Enquiry
TI-ZMZ112-36-16-CN	End. GZ M36x2, hose 1", 24°, heavy, Zn-Ni	25	-	In stock	Enquiry
TI-ZMZ112-42-16-CN	End. GZ M42x2, hose 1", 24°, heavy, Zn-Ni	25	-	In stock	Enquiry
TI-ZMZ112-52-20-CN	End. GZ M52x2, hose 1.1/4", 24°, heavy, Zn-Ni	32	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for hose), with external metric thread, sealing on a 60° cone (CES), heavy series. Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Material: carbon steel, zinc-nickel.