Is the PERROT lever connector socket with GZ BSP, carbon steel, KMG suitable for use in wastewater treatment plants and groundwater drainage at up to 10 bar?

Yes. The PERROT lever connector socket with GZ BSP, carbon steel, KMG Format is suitable for use in wastewater treatment plants and groundwater drainage up to 10 bar. The product description explicitly lists groundwater drainage, wastewater treatment plants and sewage discharge among its common applications, and specifies a working pressure of up to 10 bar. Construction from galvanized carbon steel with SBR sealing further supports suitability for these environments, offering mechanical strength and corrosion protection appropriate for typical wastewater and drainage systems.

Can the PERROT lever connector socket with GZ BSP, carbon steel, KMG handle abrasive or corrosive sewage in agricultural and industrial settings?

Yes - the PERROT lever connector socket with GZ BSP, carbon steel, KMG Format is suitable for many agricultural and industrial sewage applications. Its carbon steel body is galvanized for corrosion resistance, SBR sealing provides reliable leak-tightness, and it is rated up to 10 bar working pressure. Itâs widely used in wastewater treatment, sewage discharge, groundwater drainage and environmental protection, indicating suitability for typical sewage handling. However, for highly abrasive or strongly corrosive media (acidic/alkaline chemicals, aggressive industrial effluents, high solids concentration or long-term salt exposure) carbon steel-even galvanized-may wear or corrode faster. For such conditions consider stainless steel, special coatings or abrasion-resistant linings, and confirm chemical compatibility and particle load with the manufacturer.

Does the PERROT lever connector socket with GZ BSP, carbon steel, KMG require special maintenance for long-term outdoor use?

Yes. for long-term outdoor use the PERROT lever connector socket with GZ BSP, carbon steel, KMG Format benefits from some routine care to ensure durability and reliable performance. Recommended maintenance: - Regular visual inspections: check for corrosion, coating damage, mechanical wear and loose connections. Pay attention to galvanization condition and any rust spots. - Cleaning: remove dirt, mud, plant debris and chemical residues that can retain moisture or accelerate corrosion. Use fresh water and a mild detergent; avoid aggressive solvents that could damage the SBR sealing. - Lubrication: periodically apply a suitable corrosion-inhibiting lubricant to moving parts (lever and joints) to prevent seizing and reduce wear. Avoid lubricants that degrade SBR. - Seal checks: inspect the SBR sealing for cracking, hardening or deformation, especially after exposure to sunlight, oils or chemicals. Replace seals if any deterioration is visible. - Fastener and thread care: ensure external BSP threads stay clean and undamaged; protect threads with anti-corrosion compound if frequent disassembly or aggressive environments are expected. - Protective measures for aggressive environments: in highly corrosive conditions (coastal salt spray, chemical exposure, constant wetting) consider additional protection such as sacrificial coatings, periodic re-galvanizing, or installation of stainless-steel alternatives if available. - Pressure testing: if installed on critical systems, perform periodic pressure checks up to working pressure (â¤10 bar) following relevant safety procedures. Following these steps will extend service life and maintain safe operation of the PERROT lever connector socket with GZ BSP, carbon steel, KMG Format in outdoor applications.

A PERROT lever coupling socket with male thread BSP, steel carbon, KMG

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	10

A PERROT lever coupling socket with a thread external BSP with wide application, among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: SBR. Working pressure: up to 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HC-KMG-050-150	Socket KMG 50 mm with 1.1/2" male, galvanized steel	-	10	In stock	Enquiry
HC-KMG-050-200	Socket KMG 50 mm with 2" male, galvanized steel	-	10	In stock	Enquiry
HC-KMG-070-200	Socket KMG 70 mm with 2" male, galvanized steel	-	10	In stock	Enquiry
HC-KMG-070-250	Socket KMG 70 mm with 2.1/2" male, galvanized steel	-	10	In stock	Enquiry
HC-KMG-089-300	Socket KMG 89 mm with 3" male, galvanized steel	-	10	In stock	Enquiry
HC-KMG-108-300	Socket KMG 108 mm with 3" male, galvanized steel	-	10	In stock	Enquiry
HC-KMG-108-400	Socket KMG 108 mm with 4" male, galvanized steel	-	10	In stock	Enquiry
HC-KMG-133-500	Socket KMG 133 mm with 5" male, galvanized steel	-	10	In stock	Enquiry
HC-KMG-159-600	Socket KMG 159 mm with 6" male, galvanized steel	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A PERROT lever coupling socket with a thread external BSP with wide application, among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: SBR. Working pressure: up to 10 bar.