Can the Reducing "T" plug tee, metric version, type PUTM withstand continuous 10 bar pressure and maintain vacuum up to 0.99 bar at temperatures between 0Â°C and +60Â°C?

Yes. The Reducing "T" plug tee, metric version, type PUTM is specified for a working pressure of 10 bar and a vacuum rating of 0.99 bar, with an operating temperature range from 0Â°C to +60Â°C. Given those specifications, it can withstand continuous 10 bar pressure and maintain vacuum up to 0.99 bar within the stated temperature range. Note that these conclusions apply when the component is used as intended (proper installation, compatible hose materials and diameters, and within specified environmental and chemical exposure limits).

Is the Reducing "T" plug tee, metric version, type PUTM suitable for quick tool-free hose changes on-site?

Yes. The Reducing "T" plug tee, metric version, type PUTM is suitable for quick tool-free hose changes on-site. It is an economic plug-in connector designed for flexible pneumatic hoses with calibrated metric outer diameters, offering easy and quick use. Made of plastic, it supports working pressures up to 10 bar, vacuum to 0.99 bar, and operating temperatures from 0Â°C to +60Â°C - appropriate for typical on-site pneumatic applications requiring fast, tool-free hose changes.

Does the Reducing "T" plug tee, metric version, type PUTM resist chemical exposure from common pneumatic fluids?

Based on the provided description, the Reducing "T" plug tee, metric version, type PUTM is made of plastic and is intended as an economical, easy-to-use connector for flexible pneumatic hoses with calibrated metric outer diameters. The description lists working pressure (10 bar), vacuum rating (0.99 bar) and operating temperature range (0Â°C to +60Â°C), but does not specify chemical compatibility or resistance to pneumatic fluids. Therefore, you cannot assume the Reducing "T" plug tee, metric version, type PUTM resists chemical exposure from common pneumatic fluids without further information. Chemical resistance depends on the specific plastic material and the fluids involved (e.g., lubricants, oils, glycol-based fluids, synthetic fluids, additives). To determine compatibility, obtain the exact plastic type used and consult the manufacturer's chemical-resistance data sheet or contact the supplier for confirmed compatibility with the specific pneumatic fluids in your application. If chemical resistance is critical, consider using fittings explicitly rated for chemical exposure or made from materials known for broad chemical resistance (e.g., certain engineered polymers or metals).

Tee plug-in “T” reducing, version metric, type PUTM

All products, Push-in fittings/

Additional information

Material	P – material (plastic)
Standard length [m]	50

Coupling Tee “T” reducing of couplings push-in under hose o diameter metric, series S, type PUTM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
SH-PUTM-04-06	Tee fitting reducing PUTM, hose 2x4 mm, 1x6 mm	-	10	In stock	Enquiry
SH-PUTM-04-08	Tee fitting reducing PUTM, hose 2x4 mm, 1x8 mm	-	10	In stock	Enquiry
SH-PUTM-06-04	Tee fitting reducing PUTM, hose 2x6 mm, 1x4 mm	-	10	In stock	Enquiry
SH-PUTM-06-08	Tee fitting reducing PUTM, hose 2x6 mm, 1x8 mm	-	10	In stock	Enquiry
SH-PUTM-06-10	Tee fitting reducing PUTM, hose 2x6 mm, 1x10 mm	-	10	In stock	Enquiry
SH-PUTM-08-04	Tee fitting reducing PUTM, hose 2x8 mm, 1x4 mm	-	10	In stock	Enquiry
SH-PUTM-08-06	Tee fitting reducing PUTM, hose 2x8 mm, 1x6 mm	-	10	In stock	Enquiry
SH-PUTM-08-10	Tee fitting reducing PUTM, hose 2x8 mm, 1x10 mm	-	10	In stock	Enquiry
SH-PUTM-08-12	Tee fitting reducing PUTM, hose 2x8 mm, 1x12 mm	-	10	In stock	Enquiry
SH-PUTM-10-06	Tee fitting reducing PUTM, hose 2x10 mm, 1x6 mm	-	10	In stock	Enquiry
SH-PUTM-10-08	Tee fitting reducing PUTM, hose 2x10 mm, 1x8 mm	-	10	In stock	Enquiry
SH-PUTM-10-12	Tee fitting reducing PUTM, hose 2x10 mm, 1x12 mm	-	10	In stock	Enquiry
SH-PUTM-12-08	Tee fitting reducing PUTM, hose 2x12 mm, 1x8 mm	-	10	In stock	Enquiry
SH-PUTM-12-10	Tee fitting reducing PUTM, hose 2x12 mm, 1x10 mm	-	10	In stock	Enquiry
SH-PUTM-14-12	Tee fitting reducing PUTM, hose 2x14 mm, 1x12 mm	-	10	In stock	Enquiry
SH-PUTM-16-12	Tee fitting reducing PUTM, hose 2x16 mm, 1x12 mm	-	10	In stock	Enquiry
SH-PUTM-16-14	Tee fitting reducing PUTM, hose 2x16 mm, 1x14 mm	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Coupling Tee “T” reducing of couplings push-in under hose o diameter metric, series S, type PUTM. economical solution for connecting flexible hoses pneumatic o metric calibrated diameter outer. easy and fast in use. Material: plastic plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: od 0°C up to +60°C.