Is the SAE 6000 SUPERCAT 45Â° flange end, type ZSK313, carbon steel compatible with standard crimping sleeves for hydraulic and industrial hoses?

Yes. The SAE 6000 SUPERCAT 45Â° flange end, type ZSK313, carbon steel is designed for clamping in hydraulic and industrial hoses using a crimping sleeve appropriate for the hose type. Its construction (carbon steel, galvanized) and 45Â° flange geometry are intended to be assembled with standard crimping sleeves sized and specified for the hose being used. Ensure you use a sleeve matching the hoseâs internal diameter, reinforcement type (e.g., textile, single- or multi-wire braid), and the manufacturerâs crimp specifications (die set, crimp dimensions, and pressure ratings). Also verify compatibility with the hose manufacturerâs recommended fittings and crimp parameters to maintain hydraulic integrity and safety.

Can the SAE 6000 SUPERCAT 45Â° flange end, type ZSK313, carbon steel be used with stainless-steel crimping sleeves for corrosion-prone environments?

Yes, with reservations. SAE 6000 SUPERCAT 45Â° flange end, type ZSK313, carbon steel is specified as carbon steel, galvanized and is intended to be crimped with a sleeve suited to the hose. Using stainless-steel crimping sleeves is possible mechanically, but you must consider galvanic corrosion risk between stainless steel and galvanized carbon steel in corrosive environments, potential differences in hardness affecting crimp integrity, and compatibility with the hose material and crimp tooling. For corrosion-prone environments, either use matching materials (stainless flange/insert plus stainless sleeve) or ensure proper isolation/coatings and verify crimp dimensions and tensile performance per manufacturer specs. Consult the SAE 6000 SUPERCAT supplier or engineering data to confirm approved sleeve materials and qualified crimp parameters before retrofit.

Does the SAE 6000 SUPERCAT 45Â° flange end, type ZSK313, carbon steel require a specific crimping sleeve size for different hose types?

Yes. The SAE 6000 SUPERCAT 45Â° flange end, type ZSK313, carbon steel requires a crimping sleeve chosen to match the specific hose construction and size. The flange end is designed for clamping into hydraulic and industrial hoses using a crimping sleeve suitable for the hose type; using the correct sleeve diameter and profile ensures proper hose-to-fitting retention, sealing and pressure performance. Always select the manufacturer-recommended sleeve for the hose brand and series you are using (matching hose I.D., reinforcement type and crimp dimensions) and follow the hose makerâs crimping specifications and tooling settings.

SAE 6000 SUPERCAT 45° flange end, type ZSK313, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

SAE 6000 SUPERCAT (SFS) flange end, 45° angled. Designed for clamping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZSK313-12-12	End fitting 45° SAE 3/4", hose 3/4" SUPERCAT	20	-	In stock	Enquiry
TI-ZSK313-16-12	End fitting 45° SAE 1", hose 3/4" SUPERCAT	20	-	In stock	Enquiry
TI-ZSK313-16-16	End fitting 45° SAE 1", hose 1" SUPERCAT	25	-	In stock	Enquiry
TI-ZSK313-20-16	End fitting 45° SAE 1.1/4", hose 1" SUPERCAT	25	-	In stock	Enquiry
TI-ZSK313-20-20	End fitting 45° SAE 1.1/4", hose 1.1/4" SUPERCAT	32	-	In stock	Enquiry
TI-ZSK313-24-20	End fitting 45° SAE 1.1/2", hose 1.1/4" SUPERCAT	32	-	In stock	Enquiry
TI-ZSK313-24-24	End fitting 45° SAE 1.1/2", hose 1.1/2" SUPERCAT	38	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

SAE 6000 SUPERCAT (SFS) flange end, 45° angled. Designed for clamping in hydraulic and industrial hoses using a crimping sleeve suitable for the hose type. Material: carbon steel, galvanized.