Can the Twisted sleeve for 2SN hydraulic hoses, carbon steel, type S2T be used with fittings from other suppliers, or only with TI-Sâ¦ screwed fittings?

Twisted sleeve for 2SN hydraulic hoses, carbon steel, type S2T Format can be used only with screwed fittings from the same supplier (TI-Sâ¦). The product description for the equivalent screwed sleeve (R2T) specifies: "Use only with a screwed fitting from the same supplier (TI-Sâ¦). Material: carbon steel, galvanized." To ensure correct fit, seal and safe operation, match the sleeve with the specified TI-Sâ¦ screwed fittings rather than fittings from other suppliers.

Are Twisted sleeve for 2SN hydraulic hoses, carbon steel, type S2T compatible with non-TI-S screwed fittings?

No. Twisted sleeve for 2SN hydraulic hoses, carbon steel, type S2T are intended for use only with screwed fittings from the same supplier (TIâSâ¦). Therefore they are not compatible with nonâTIâS screwed fittings.

Is the Twisted sleeve for 2SN hydraulic hoses, carbon steel, type S2T strictly limited to TI-Sâ¦ screwed fittings?

No. the Twisted sleeve for 2SN hydraulic hoses, carbon steel, type S2T is intended to be used only with a screwed fitting from the same supplier (TIâSâ¦), so it is strictly limited to TIâS screwed fittings. Material: carbon steel, galvanized.

Screw-together ferrule for hoses hydraulic 2SN, carbon steel, type S2T

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Screw-together ferrule for non-skive rubber hydraulic hoses type 2SN (R2T). Use only with fittings screw-together from the same supplier (TI-S…). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-S2T-04	Sleeve na hose SAE R2AT DIN 20022 1/4"	6	-	In stock	Enquiry
TI-S2T-05	Sleeve na hose SAE R2AT DIN 20022 5/16"	8	-	In stock	Enquiry
TI-S2T-06	Sleeve na hose SAE R2AT DIN 20022 3/8"	10	-	In stock	Enquiry
TI-S2T-08	Sleeve na hose SAE R2AT DIN 20022 1/2"	12	-	In stock	Enquiry
TI-S2T-10	Sleeve na hose SAE R2AT DIN 20022 5/8"	16	-	In stock	Enquiry
TI-S2T-12	Sleeve na hose SAE R2AT DIN 20022 3/4"	20	-	In stock	Enquiry
TI-S2T-16	Sleeve na hose SAE R2AT DIN 20022 1"	25	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Screw-together ferrule for non-skive rubber hydraulic hoses type 2SN (R2T). Use only with fittings screw-together from the same supplier (TI-S…). Material: carbon steel, galvanized.