Can the Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 be used with fittings other than TI-S series from the same supplier?

Based on the product description, the Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 is specified for use only with a screwed fitting from the same supplier (TI-S series). That indicates it was designed, tested and certified as a matched component with TI-S fittings. Using it with other suppliersâ fittings or different fitting series could result in improper fit, seal failure, loss of mechanical integrity or voiding of any warranty or certification. Therefore you should not use the SOL5 twisted sleeve with fittings other than the specified TI-S series from the same supplier unless you obtain explicit written confirmation from the supplier that an alternative fitting is compatible and approved.

Is the Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 compatible with other suppliers' screwed fittings?

No. The Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 is designed to be used only with a screwed fitting from the same supplier (TI-S...). It is not specified as compatible with other suppliers' screwed fittings.

Does Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 require TI-S series screwed fittings only?

No. Twisted sleeve for thermoplastic hoses OL5, VE5, carbon steel, type SOL5 should be used only with a screwed fitting from the same supplier (TI-S series) according to the product description. That means SOL5 is intended to be paired with TIâS screwed fittings supplied by the same manufacturer to ensure compatibility and proper performance.

Screw-together ferrule for hoses termoplastycznych OL5, VE5, carbon steel, type SOL5

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)
Standard length [m]	10

Screw-together ferrule for hoses termoplastycznych type OL5 or VE5. Use only with fittings screw-together from the same supplier (TI-S…). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-SOL5-025	Sleeve for hose termopl. OL5/VE5 5/32" (4x8 mm)	4	-	In stock	Enquiry
TI-SOL5-03	Sleeve for hose termopl. OL5/VE5 3/16"	5	-	In stock	Enquiry
TI-SOL5-04	Sleeve for hose termopl. OL5/VE5 1/4"	6	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Screw-together ferrule for hoses termoplastycznych type OL5 or VE5. Use only with fittings screw-together from the same supplier (TI-S…). Material: carbon steel, galvanized.