Strong, flexible, thick hose designed for the removal of sawdust, chips, shavings, bulk materials, etc. Specifically designed according to the requirements of the woodworking and furniture industries, it can also be used in other industrial fields. Compliant with DIN 26057 Type 3. Antistatic and flame-retardant, ensuring high work safety. Thick wall and dense reinforcing spiral provide high pressure parameters. Very smooth inside, low compressibility. Flexible even at low temperatures. Excellent abrasion resistance, also resistant to microbes and hydrolysis. Free of halogen compounds and plasticizers. Resistant to oils and gasoline. The optimal flow direction of the medium is marked with an arrow. The wall thickness of the hose is measured between the spiral. Installation on couplings with bridge clamps (right-handed). Other diameters may be available upon special request. Antistatic properties: permanently antistatic (according to ISO 8031 resistance R <10⁹ Ω, according to German technical regulations TRGS 727 (6.4.2.4) specific resistance R < 2.5 x 10⁸ Ωm, according to directive 2014/34/EU (ATEX) can be used in specific explosion hazard zones – which must be preceded by a risk analysis). After effective double grounding of the spiral, it can be treated as electrically conductive – in accordance with BGI 739-2 recommendations. Flame-retardant – according to DIN 4102 class B1. Wall thickness measured between the spiral: 1.4 mm. Hose material: transparent polyester-polyurethane. Reinforcement: steel wire spiral. Operating temperature: from -40°C to +100°C (temporarily up to +125°C).