Is the CAMLOCK connector standard gasket, NBR compatible with food-grade applications at temperatures between -40Â°C and +93Â°C?

CAMLOCK connector standard gasket, NBR . based on the provided description (material: NBR; operating temperature: -40Â°C to +93Â°C), standard NBR (nitrile rubber) gaskets are generally not recommended for food-grade applications unless the specific NBR compound is certified for food contact. Standard NBR formulations can contain additives, accelerators and plasticizers that are not food-safe and may leach into food or beverages. If you require a food-grade gasket for CAMLOCK couplings, you should verify that the specific gasket is manufactured to a recognized food-contact standard (e.g., FDA 21 CFR 177.2600, EU Regulation 10/2011 or equivalent) and that the supplier provides a Declaration of Conformity or test reports. Also consider alternative elastomers commonly used for food applications and similar temperature ranges, such as FDA-grade EPDM, silicone (food-grade), or FDA-approved NBR grades specifically formulated and certified for food contact. In short: CAMLOCK connector standard gasket, NBR as described meets the temperature range, but its suitability for food-grade use depends on explicit food-contact certification of that specific NBR compound.without such certification it should not be assumed food-safe.

Can the CAMLOCK connector standard gasket, NBR withstand exposure to oils and fuels at temperatures from -40Â°C to +93Â°C?

Yes. CAMLOCK connector standard gasket, NBR is suitable for exposure to many oils and fuels within its specified operating temperature range of -40Â°C to +93Â°C. NBR (nitrile rubber) offers good resistance to mineral oils, hydraulic fluids and common fuels at these temperatures. However, compatibility can vary with specific hydrocarbons, additives, and high aromatic or synthetic fuels; prolonged exposure to aggressive solvents, fuel blends with oxygenates (e.g., high ethanol content), or certain additives may reduce gasket life. For critical applications, confirm compatibility using the specific fluidâs chemical composition and operating conditions or request manufacturer confirmation/testing.

Does the CAMLOCK connector standard gasket, NBR maintain sealing integrity at -40Â°C to +93Â°C under repeated cycling?

Yes. the CAMLOCK connector standard gasket, NBR is specified to operate from â40Â°C to +93Â°C, and when used within that range it will maintain sealing integrity under normal repeated thermal cycling typical for its intended applications. Why: NBR (nitrile rubber) retains elasticity, compression set resistance and sealing properties across the â40Â°C to +93Â°C range specified. The declared operating temperature band means the materialâs mechanical and sealing characteristics have been validated (by manufacturer design/data) for exposure and cyclical use within those limits. Repeated cycles that stay inside this temperature span should not cause abrupt loss of seal if the gasket is correctly installed, not mechanically damaged, and is compatible with the conveyed media. Limitations and caveats: actual longevity under repeated cycling depends on cycle amplitude and rate, mechanical stresses, chemical exposure, pressure, compression set, installation quality and aging. Continuous exposure at the extremes, aggressive fluids, ozone/UV, or excessive compression/abrasion can accelerate degradation. For critical or high-cycle applications, validate with application-specific testing or consult supplier life-cycle data. Recommendation: use the CAMLOCK connector standard gasket, NBR within â40Â°C to +93Â°C and follow manufacturer installation and maintenance guidance; if conditions include extreme chemicals, very high cycle counts, or sustained operation at temperature limits, request performance data or consider alternative elastomers.

CAMLOCK connector standard gasket, NBR

Additional information

Maximum operating temperature [°C]	93
Minimum operating temperature [°C]	-40

Standard gasket for the female part (socket) of the CAMLOCK coupling. Material: NBR. Operating temperature: from -40°C to +93°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-G-050-B	BUNA gasket 1/2"	-	-	In stock	Enquiry
AC-G-050-BX	BUNA gasket 1/2"	-	-	In stock	Enquiry
AC-G-075-B	BUNA gasket 3/4"	-	-	In stock	Enquiry
AC-G-075-BX	BUNA gasket 3/4"	-	-	In stock	Enquiry
AC-G-100-B	BUNA gasket 1	-	-	In stock	Enquiry
AC-G-100-BX	BUNA gasket 1	-	-	In stock	Enquiry
AC-G-125-B	BUNA gasket 1.1/4"	-	-	In stock	Enquiry
AC-G-125-BX	BUNA gasket 1.1/4"	-	-	In stock	Enquiry
AC-G-150-B	BUNA gasket 1.1/2"	-	-	In stock	Enquiry
AC-G-150-BX	BUNA gasket 1.1/2"	-	-	In stock	Enquiry
AC-G-200-B	BUNA gasket 2"	-	-	In stock	Enquiry
AC-G-200-BX	BUNA gasket 2"	-	-	In stock	Enquiry
AC-G-250-B	BUNA gasket 2.1/2"	-	-	In stock	Enquiry
AC-G-250-BX	BUNA gasket 2.1/2"	-	-	In stock	Enquiry
AC-G-300-B	BUNA 3 gasket	-	-	In stock	Enquiry
AC-G-300-BX	BUNA 3 gasket	-	-	In stock	Enquiry
AC-G-400-B	BUNA gasket 4"	-	-	In stock	Enquiry
AC-G-400-BX	BUNA gasket 4"	-	-	In stock	Enquiry
AC-G-500-B	BUNA gasket 5"	-	-	In stock	Enquiry
AC-G-500-BX	BUNA gasket 5"	-	-	In stock	Enquiry
AC-G-600-B	BUNA gasket 6"	-	-	In stock	Enquiry
AC-G-600-BX	BUNA gasket 6"	-	-	In stock	Enquiry