Is the CAMLOCK ERS connector plug with smooth hose end, stainless steel compatible with standard MIL-C-27487 (A-A-59326) fittings?

Yes. The CAMLOCK ERS connector plug with smooth hose end, stainless steel is designed for use with hoses made according to the American military standard MIL-C-27487 (A-A-59326), so it is compatible with standard MIL-C-27487 (A-A-59326) fittings. Itâs intended as a transfer connection (common in petrochemical use), made of AISI 316 stainless steel, and rated for working pressures up to 10 bar depending on connector size.

What hose sizes are supported by the CAMLOCK ERS connector plug with smooth hose end, stainless steel for safe operation up to 10 bar?

CAMLOCK ERS connector plug with smooth hose end, stainless steel supports hose sizes matching standard camlock sizes for MIL-C-27487 (A-A-59326) smooth-bore hoses. Typical available nominal connector sizes and corresponding hose I.D. are: 1/2" (hoses ~12â13 mm I.D.), 3/4" (~19â20 mm I.D.), 1" (~25 mm I.D.), 1Â¼" (~32 mm I.D.), 1Â½" (~38 mm I.D.), 2" (~50 mm I.D.), 2Â½" (~63 mm I.D.), 3" (~75 mm I.D.) and 4" (~100 mm I.D.). Actual supported hose I.D. and working pressure (up to 10 bar) depend on the specific connector size and hose construction; always verify exact dimensions with the manufacturerâs datasheet for CAMLOCK ERS connector plug with smooth hose end, stainless steel.

Can the CAMLOCK ERS connector plug with smooth hose end, stainless steel be used for petrochemical fluid transfer at 10 bar?

Yes. The CAMLOCK ERS connector plug with smooth hose end, stainless steel is designed for transfer use in the petrochemical industry and is manufactured to the American military standard MIL-C-27487 (A-A-59326). Its stated working pressure is up to 10 bar, depending on connector size, and it is made from AISI 316 stainless steelâmaterial suitable for many petrochemical fluids due to its corrosion resistance. Caveats: confirm the specific connector size and its rated working pressure (some sizes may have lower limits), verify chemical compatibility of AISI 316 with the exact fluids, check temperature and mechanical conditions (temperature, hose type, clamps, flow rate, cyclic loads), and ensure installation meets relevant safety and regulatory requirements for your application. If in doubt, consult the manufacturerâs datasheet or a qualified engineer.

Plug coupling CAMLOCK ERS with smooth fitting for hose, steel stainless

Additional information

Material	SS – stainless steel

Plug coupling CAMLOCK ERS with smooth fitting for hose made in accordance with the American military standard MIL-C-27487 (A-A-59326). commonly used as coupling transfer, particularly in industry petrochemical. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-ERS-050-SS	Coupling CAMLOCK ERS 1/2", AISI 316	12	10	In stock	Enquiry
AC-ERS-050-SSX	Coupling CAMLOCK ERS 1/2", AISI 316	12	10	In stock	Enquiry
AC-ERS-075-SS	Coupling CAMLOCK ERS 3/4", AISI 316	20	10	In stock	Enquiry
AC-ERS-075-SSX	Coupling CAMLOCK ERS 3/4", AISI 316	20	10	In stock	Enquiry
AC-ERS-100-SS	Coupling CAMLOCK ERS 1", AISI 316	25	10	In stock	Enquiry
AC-ERS-100-SSX	Coupling CAMLOCK ERS 1", AISI 316	25	10	In stock	Enquiry
AC-ERS-125-SS	Coupling CAMLOCK ERS 1.1/4", AISI 316	32	10	In stock	Enquiry
AC-ERS-125-SSX	Coupling CAMLOCK ERS 1.1/4", AISI 316	32	10	In stock	Enquiry
AC-ERS-150-SS	Coupling CAMLOCK ERS 1.1/2", AISI 316	40	10	In stock	Enquiry
AC-ERS-150-SSX	Coupling CAMLOCK ERS 1.1/2", AISI 316	40	10	In stock	Enquiry
AC-ERS-200-SS	Coupling CAMLOCK ERS 2", AISI 316	50	10	In stock	Enquiry
AC-ERS-200-SSX	Coupling CAMLOCK ERS 2", AISI 316	50	16	In stock	Enquiry
AC-ERS-250-SS	Coupling CAMLOCK ERS 2.1/2", AISI 316	65	10	In stock	Enquiry
AC-ERS-250-SSX	Coupling CAMLOCK ERS 2.1/2", AISI 316	65	16	In stock	Enquiry
AC-ERS-300-SS	Coupling CAMLOCK ERS 3", AISI 316	75	10	In stock	Enquiry
AC-ERS-300-SSX	Coupling CAMLOCK ERS 3", AISI 316	75	10	In stock	Enquiry
AC-ERS-400-SS	Coupling CAMLOCK ERS 4", AISI 316	100	10	In stock	Enquiry
AC-ERS-400-SSX	Coupling CAMLOCK ERS 4", AISI 316	100	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug coupling CAMLOCK ERS with smooth fitting for hose made in accordance with the American military standard MIL-C-27487 (A-A-59326). commonly used as coupling transfer, particularly in industry petrochemical. Working pressure: up to 10 bar, depending on the coupling size. Material: steel AISI 316.