Does the M16x2 measuring connection with metal or plastic cap and male thread fit both JIC 7/16"-20 UNF (37Â°) and metric M16x2 hydraulic ports?

Yes. The M16x2 measuring connection with metal or plastic cap and male thread is designed to fit both JIC 7/16"-20 UNF (37Â°) and metric M16x2 hydraulic ports. It features an M16x2 thread on the measurement tip and provides the appropriate external male connection to mate with either the JIC 7/16"-20 UNF (37Â° cone) or a metric M16x2 hydraulic port. Constructed of steel with zinc-nickel coating, sealed with NBR and rated for 450â630 bar (type-dependent), it supports operating temperatures from -30Â°C to +120Â°C (plastic cap use limits max to +100Â°C).

Can the M16x2 measuring connection with metal or plastic cap and male thread withstand continuous operation at 630 bar without seal degradation?

The M16x2 measuring connection with metal or plastic cap and male thread Format can operate continuously at 630 bar only if the specific variant is rated for 630 bar (working pressure range given as 450â630 bar depending on type). The coupling body (steel, ZnâNi) and metal cap are suitable for high pressure; however sealing relies on NBR, whose temperature and chemical limits must be respected. Continuous 630 bar operation is acceptable provided: you use the variant specified for 630 bar; fluid compatibility with NBR; ambient/operating temperature â¤ +120Â°C (if using plastic cap, max +100Â°C); correct installation and torque; and absence of pressure spikes above rating. If any of these conditions are not met, seal degradation and failure risk increase.

Is the M16x2 measuring connection with metal or plastic cap and male thread compatible with NBR seals at -30Â°C to +120Â°C?

M16x2 measuring connection with metal or plastic cap and male thread Format: Yes. The coupling uses NBR sealing and the specified operating temperature range is â30Â°C to +120Â°C for the metal cap version; the plastic cap version is rated â30Â°C to +100Â°C. Therefore NBR seals are compatible within â30Â°Câ¦+120Â°C only when the metal cap is used; with the plastic cap compatibility is limited to â30Â°Câ¦+100Â°C.

M16x2 measurement connection with metal or plastic cap and male thread

All products, Measurement couplings/

Additional information

Material	CS – steel (cast iron)

The measurement coupling is designed according to the requirements of ISO 15171-2. Used primarily for pressure diagnostics in power hydraulic systems, it can also be used for lubrication, venting, oil sampling and micro-hydraulics. Intended for hydraulic oil and mineral oils, made of carbon steel with a zinc-nickel coating, with NBR seals, with Viton (marked with the letter “V” at the end of the index) and with EPDM (marked with the letters “EA” at the end of the index). Available with a metal cap or a plastic cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and an appropriate connection for connection to the hydraulic system. Material: steel with zinc-nickel coating. Working pressure: from 400 bar to 630 bar – depending on the type. Sealing: NBR, Viton, EPDM. Operating temperature: from -30°C to +120°C – NBR (from -30°C to +100°C with a plastic cap), from -20°C to +200°C – Viton.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
PS-620-01-008-00	Measurement coupling M16x2, connection M8x1 male type F, plastic cap	-	250	In stock	Enquiry
PS-620-01-008-01	Measurement coupling M16x2, connection M8x1 male type F, metal cap	-	250	In stock	Enquiry
PS-620-01-010-00	Measurement coupling M16x2, connection M10x1 male type F, plastic cap	-	630	In stock	Enquiry
PS-620-01-010-01	Measurement coupling M16x2, connection M10x1 male type F, metal cap	-	630	In stock	Enquiry
PS-620-01-010-20	Measurement coupling M16x2, connection M10x1 male type E, plastic cap	-	400	In stock	Enquiry
PS-620-01-010-21	Measurement coupling M16x2, connection M10x1 male type E, metal cap	-	400	In stock	Enquiry
PS-620-01-012-20	Measurement coupling M16x2, connection M12x1.5 male type E, plastic cap	-	630	In stock	Enquiry
PS-620-01-012-21	Measurement coupling M16x2, connection M12x1.5 male type E, metal cap	-	630	In stock	Enquiry
PS-620-01-014-00	Measurement coupling M16x2, connection M14x1.5 male type F, plastic cap	-	630	In stock	Enquiry
PS-620-01-014-01	Measurement coupling M16x2, connection M14x1.5 male type F, metal cap	-	630	In stock	Enquiry
PS-620-01-014-20	Measurement coupling M16x2, connection M14x1.5 male type E, plastic cap	-	630	In stock	Enquiry
PS-620-01-014-21	Measurement coupling M16x2, connection M14x1.5 male type E, metal cap	-	630	In stock	Enquiry
PS-620-01-202-20	Measurement coupling M16x2, connection 1/8" BSP male type E, plastic cap	-	400	In stock	Enquiry
PS-620-01-202-21	Measurement coupling M16x2, connection 1/8" BSP male type E, metal cap	-	400	In stock	Enquiry
PS-620-01-202-30	Measurement coupling M16x2, connection 1/8" BSPT male type C, plastic cap	-	400	In stock	Enquiry
PS-620-01-202-31	Measurement coupling M16x2, connection 1/8" BSPT male type C, metal cap	-	400	In stock	Enquiry
PS-620-01-204-00	Measurement coupling M16x2, connection 1/4" male JIS type F, plastic cap	-	630	In stock	Enquiry
PS-620-01-204-01	Measurement coupling M16x2, connection 1/4" male JIS type F, metal cap	-	630	In stock	Enquiry
PS-620-01-204-20	Measurement coupling M16x2, connection 1/4" BSP male type E, plastic cap	-	630	In stock	Enquiry
PS-620-01-204-21	Measurement coupling M16x2, connection 1/4" BSP male type E, metal cap	-	630	In stock	Enquiry
PS-620-01-204-30	Measurement coupling M16x2, connection 1/4" BSPT male type C, plastic cap	-	630	In stock	Enquiry
PS-620-01-204-31	Measurement coupling M16x2, connection 1/4" BSPT male type C, metal cap	-	630	In stock	Enquiry
PS-620-01-206-20	Measurement coupling M16x2, connection 3/8" BSP male type E, plastic cap	-	630	In stock	Enquiry
PS-620-01-206-21	Measurement coupling M16x2, connection 3/8" BSP male type E, metal cap	-	630	In stock	Enquiry
PS-620-01-302-30	Measurement coupling M16x2, connection 1/8" NPTF male type C, plastic cap	-	400	In stock	Enquiry
PS-620-01-302-31	Measurement coupling M16x2, connection 1/8" NPTF male type C, metal cap	-	400	In stock	Enquiry
PS-620-01-304-30	Measurement coupling M16x2, connection 1/4" NPTF male type C, plastic cap	-	630	In stock	Enquiry
PS-620-01-304-31	Measurement coupling M16x2, connection 1/4" NPTF male type C, metal cap	-	630	In stock	Enquiry
PS-620-01-404-00	Measurement coupling M16x2, connection 7/16"-20 UNF male type F, plastic cap	-	630	In stock	Enquiry
PS-620-01-404-01	Measurement coupling M16x2, connection 7/16"-20 UNF male type F, metal cap	-	630	In stock	Enquiry
PS-620-01-405-00	Measurement coupling M16x2, connection 1/2"-20 UNF male type F, plastic cap	-	630	In stock	Enquiry
PS-620-01-405-01	Measurement coupling M16x2, connection 1/2"-20 UNF male type F, metal cap	-	630	In stock	Enquiry
PS-620-01-406-00	Measurement coupling M16x2, connection 9/16"-18 UNF male type F, plastic cap	-	630	In stock	Enquiry
PS-620-01-406-01	Measurement coupling M16x2, connection 9/16"-18 UNF male type F, metal cap	-	630	In stock	Enquiry
PS-621-01-010-00V	Measurement coupling M16x2, connection M10x1 male type F, Viton, plastic cap	-	630	In stock	Enquiry
PS-621-01-010-06V	Measurement coupling M16x2, connection M10x1 male type F, Viton, metal cap	-	630	In stock	Enquiry
PS-621-01-014-20V	Measurement coupling M16x2, connection M14x1.5 male type E, Viton, plastic cap	-	630	In stock	Enquiry
PS-621-01-014-26V	Measurement coupling M16x2, connection M14x1.5 male type E, Viton, metal cap	-	630	In stock	Enquiry
PS-621-01-202-20V	Measurement coupling M16x2, connection 1/8" BSP male type E, Viton, plastic cap	-	630	In stock	Enquiry
PS-621-01-202-26V	Measurement coupling M16x2, connection 1/8" BSP male type E, Viton, metal cap	-	630	In stock	Enquiry
PS-621-01-204-20EA	Measurement coupling M16x2, connection 1/4" BSP male type E, EPDM, plastic cap	-	630	In stock	Enquiry
PS-621-01-204-20V	Measurement coupling M16x2, connection 1/4" BSP male type E, Viton, plastic cap	-	630	In stock	Enquiry
PS-621-01-204-26EA	Measurement coupling M16x2, connection 1/4" BSP male type E, EPDM, metal cap	-	630	In stock	Enquiry
PS-621-01-204-26V	Measurement coupling M16x2, connection 1/4" BSP male type E, Viton, metal cap	-	630	In stock	Enquiry
PS-621-01-304-30V	Measurement coupling M16x2, connection 1/4" NPTF male type C, Viton, plastic cap	-	630	In stock	Enquiry
PS-621-01-304-36V	Measurement coupling M16x2, connection 1/4" NPTF male type C, Viton, metal cap	-	630	In stock	Enquiry
PS-626-01-204-26	Measurement coupling M16x2, connection 1/4" BSP male type E, AISI 316, Viton, metal cap.	-	630	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

The measurement coupling is designed according to the requirements of ISO 15171-2. Used primarily for pressure diagnostics in power hydraulic systems, it can also be used for lubrication, venting, oil sampling and micro-hydraulics. Intended for hydraulic oil and mineral oils, made of carbon steel with a zinc-nickel coating, with NBR seals, with Viton (marked with the letter “V” at the end of the index) and with EPDM (marked with the letters “EA” at the end of the index). Available with a metal cap or a plastic cap. The coupling has the ISO 15171-2 standard M16x2 thread on the measuring end, and an appropriate connection for connection to the hydraulic system. Material: steel with zinc-nickel coating. Working pressure: from 400 bar to 630 bar – depending on the type. Sealing: NBR, Viton, EPDM. Operating temperature: from -30°C to +120°C – NBR (from -30°C to +100°C with a plastic cap), from -20°C to +200°C – Viton.