Is the Twisted sleeve for MT1, MTH1 thermoplastic hoses, carbon steel, type SMT1 compatible only with TI-S screwed fittings from the same supplier?

Twisted sleeve for MT1, MTH1 thermoplastic hoses, carbon steel, type SMT1 is intended for use with a screwed fitting from the same supplier (TI-S...), according to the product description. That phrasing indicates compatibility is specified only with the supplierâs TI-S screwed fittings; it implies the sleeve was designed, tested and approved to work with those TI-S fittings. Using it with other suppliersâ screwed fittings could risk improper fit, seal failure or loss of certification. Therefore, it is compatible only with TI-S screwed fittings from the same supplier unless the supplier explicitly states and documents compatibility with other fittings.

Can the Twisted sleeve for MT1, MTH1 thermoplastic hoses, carbon steel, type SMT1 be used with other manufacturers' TI-S style fittings?

No. The Twisted sleeve for MT1, MTH1 thermoplastic hoses, carbon steel, type SMT1 Format is to be used only with a screwed fitting from the same supplier (TI-S...). It is not specified for use with other manufacturers' TI-S style fittings.

Can the Twisted sleeve for MT1, MTH1 thermoplastic hoses, carbon steel, type SMT1 be fitted with non-TI-S compliant screwed fittings?

No. The Twisted sleeve for MT1, MTH1 thermoplastic hoses, carbon steel, type SMT1 must be used only with a screwed fitting from the same supplier (TIâS...). It is specified for use with the supplierâs TIâS compliant screwed fittings; using nonâTIâS fittings would violate the productâs specified compatibility and could compromise assembly integrity and safety.

Screw-together ferrule for hoses termoplastycznych MT1, MTH1, carbon steel, type SMT1

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Screw-together ferrule for hoses termoplastycznych type MT1 or MTH1. Use only with fittings screw-together from the same supplier (TI-S…). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-SMT1-04	Sleeve for hose termopl. MT1 / MTH1 1/4"	6	-	In stock	Enquiry
TI-SMT1-05	Sleeve for hose termopl. MT1 / MTH1 5/16"	8	-	In stock	Enquiry
TI-SMT1-06	Sleeve for hose termopl. MT1 / MTH1 3/8"	10	-	In stock	Enquiry
TI-SMT1-08	Sleeve for hose termopl. MT1 / MTH1 1/2"	12	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Screw-together ferrule for hoses termoplastycznych type MT1 or MTH1. Use only with fittings screw-together from the same supplier (TI-S…). Material: carbon steel, galvanized.