Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for water installations, seawater, cooling water including treatment agents, drinking water, acids and bases in low concentrations, salt solutions, esters, and ketones. Not suitable for mineral oils, cooling water with anti-corrosive agents containing oil, or oil-laden air. Marked on the single sleeve with a red stripe. Inner layer: butyl rubber (IIR) / EPDM. Reinforcement: nylon cord. Outer layer: EPDM rubber. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +100°C (temporarily +120°C depending on the medium).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of mineral oils, vegetable and animal fats, aerosol oils, water with added anti-corrosive substances. Inner layer: NBR rubber. Reinforcement: nylon cord. Outer layer: CR rubber. Flanges: galvanized carbon steel. Operating temperature: from -30°C to +90°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of hot and cold water, water with the addition of treatment agents, industrial water, seawater, glycol, weak acids, bases, esters, and ketones. Not intended for conveying media containing oil. BV (Bureau Veritas) certification. Inner layer: EPDM rubber. Reinforcement: nylon cord. Outer layer: EPDM rubber. Flanges: galvanized carbon steel. Operating temperature: from -30°C to +90°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDue to their exceptional abrasion resistance, these compensators are used for the transmission of media such as: suspensions, sediments, emulsions, water with all kinds of additives containing solid elements that have an abrasive effect. They are not intended for the transmission of media containing oils and fats or petroleum products. Marked on the bellows with a single blue dot. Inner layer: BR/NR rubber. Reinforcement: polyester braid. Outer layer: BR/NR rubber. Flanges: galvanized carbon steel. Operating temperature: from -50°C to +70°C (temporarily +90°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in hot water, cooling water, and hot air installations. Not suitable for mineral oils, cooling water with anti-corrosive agents containing oil, or oil-laden air. Marked on the double sleeve with a red stripe. Inner layer: EPDM rubber. Reinforcement: polymer cord. Outer layer: EPDM rubber. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +130°C (temporarily +150°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of petroleum-derived products with aromatic compound content up to 50%, oil-laden air, natural gas (not LPG), oil-contaminated water, cooling water with anti-corrosive agents. Marked on the sleeve with a single yellow stripe. Inner layer: NBR (nitrile) rubber. Reinforcement: nylon cord. Outer layer: CR (chloroprene) rubber. Flanges: galvanized carbon steel. Operating temperature: from -20°C to +90°C (temporarily +100°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for the installation of cold and hot water (not drinking water), seawater, cooling water including with treatment agents, municipal wastewater, oil-contaminated water, compressed air (not hot). Not suitable for heating oil, diesel, gasoline, and other hydrocarbons as well as acids and bases. Marked on the sleeve with the letters CR without a stripe. Inner layer: CR rubber (chloroprene). Reinforcement: nylon cord. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -25°C to +90°C (temporarily +100°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of hot and cold water, cooling water with water treatment additives, drinking water, industrial water, chlorine solutions, glycol, acids, bases, lime milk, esters and ketones, seawater. Should not come into contact with oily substances. Has a PZH certificate for drinking water. Inner layer: EPDM rubber. Reinforcement: nylon braid. Outer layer: EPDM rubber. Flanges: galvanized carbon steel. Operating temperature: up to +100°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber bellows for compensators designed for use in installations where the medium consists of hot and cold water, water with additives for treatment, industrial water, seawater, glycol, weak acids, bases, esters, and ketones. Not intended for the transmission of media containing oil. BV (Bureau Veritas) certification. Inner layer: EPDM rubber. Reinforcement: nylon cord. Outer layer: EPDM rubber. Operating temperature: from -30°C to +90°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for installation with food media, including those containing oils and fats. Not suitable for drinking water. Marked on the sleeve with a white stripe. Inner layer: white NBR (nitrile) rubber. Reinforcement: nylon cord. Outer layer: CR (chloroprene) rubber. Flanges: galvanized carbon steel. Operating temperature: from -20°C to +90°C (temporarily +100°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of chemical products, petroleum derivatives with aromatic compound content up to 50%, acids, bases, oil-laden air (up to +90°C), natural gas (not LPG), oil-contaminated water, cooling water with anti-corrosive agents. Marked on the sleeve with a single green stripe. Inner layer: CSM rubber (Hypalon). Reinforcement: nylon cord. Outer layer: CSM rubber (Hypalon). Flanges: galvanized carbon steel. Operating temperature: from -20°C to +100°C (temporarily +110°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for the transmission of LPG (Liquid Petroleum Gas) in accordance with EN 589 standards in tankers, fuel installations, and fuel stations. Certified by Germanischer Lloyd. Also available with ASA 300 flanges. Marked on the single sleeve with an orange stripe. Inner layer: conductive NBR rubber. Reinforcement: nylon cord. Outer layer: conductive CR rubber. Flanges: galvanized carbon steel. Operating temperature: from -20°C to +90°C (temporarily +100°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for absorbing vibrations and shocks as well as linear and angular displacements in water installations. Not intended for transmitting media containing oil. Has PZH certification for drinking water. Inner layer: EPDM rubber. Reinforcement: nylon cord. Outer layer: EPDM rubber. Connections: BSP thread, cast iron, galvanized. Operating temperature: from -10°C to +100°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompensator designed for use in installations where the medium consists of mineral oils, vegetable and animal fats, aerosol oils, water with the addition of anti-corrosive substances. Inner layer: NBR rubber. Reinforcement: nylon braid. Outer layer: NBR rubber. Flanges: galvanized carbon steel. Operating temperature: up to +80°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for sanitary installations, cold and hot water, pool water, seawater, drinking water. Not suitable for mineral oils, cooling water with corrosion inhibitors containing oil, oil-laden air, and installations where the constant working pressure exceeds 10 bar. Marked on the sleeve with a single red dot. Inner layer: butyl rubber (IIR) / EPDM. Reinforcement: nylon cord. Outer layer: EPDM rubber. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +90°C (temporarily +120°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber bellows for compensators designed for use in installations where the medium consists of mineral oils, vegetable and animal fats, aerosol oils, water with added anti-corrosive substances. Inner layer: NBR rubber. Reinforcement: nylon cord. Outer layer: CR rubber. Operating temperature: from -30°C to +90°C (depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of petroleum-derived products, gasoline, diesel fuel, heating oil, aviation fuel JET A1, kerosene. Marked on the sleeve with a single yellow stripe and white letters LT. Inner layer: NBR (nitrile) rubber. Reinforcement: nylon cord. Outer layer: CR (chloroprene) rubber. Flanges: galvanized carbon steel. Operating temperature: from -40°C to +90°C (temporarily +100°C depending on the medium).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDesigned for use in installations where the medium consists of petroleum-derived products and fuels with aromatic compound content up to 50%, cooling water with oil-based anti-corrosive agents, lubricating and hydraulic oil, seawater. Marked with a yellow-blue-yellow stripe on the sleeve. Inner layer: HNBR rubber (nitrile). Reinforcement: steel cord. Outer layer: CR rubber (chloroprene). Flanges: galvanized carbon steel. Operating temperature: from -35°C to +100°C (temporarily +120°C depending on the medium).
