Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWelding stub, type WRS, for flange EN 1092-1 PN16 for installation with RS shell clamp or for tightening with sleeve TI-LR, TI-LDR. Material: carbon steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for flange PN made according to standard PN-EN 1514-1. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 10 PN40 is suitable for classes PN10, PN16, and PN25. Material: KLINGER SIL 4430. Working pressure: up to 100 bar. Operating temperature: from -200°C to +400°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for flange PN made according to standard PN-EN 1514-1. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 10 PN40 is suitable for classes PN10, PN16, and PN25. Material: PTFE. Working pressure: up to 300 bar. Operating temperature: from -200°C to +220°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWelding stub, type WRS, for flange EN 1092-1 PN16 for installation with RS shell clamp or for tightening with TI-LR, TI-LDR sleeve. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWelding stub, type WRS, for flange EN 1092-1 PN16 for installation with RS shell clamp or for tightening with TI-LR, TI-LDR sleeve. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd piece - insert according to EN14420-4 with a smooth "tail" for mounting with RS shell clamp or for crimping with TI-LR, TI-LDR. For use in the industry, e.g., for connections with flexible hoses. Material: carbon steel, galvanized. Working pressure: up to 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection set (EN 1092), type SZ1. Included: DIN931 bolts - 4 pieces, DIN934 nuts - 4 pieces, and DIN125A washers - 4 pieces. Mechanical property class: 5.6 - bolts; 8 - nuts; 140HV - washers. Selection of bolts and nuts for flanges according to the table in the appendix. Material: carbon steel, electro-galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for flange PN made according to standard PN-EN 1514-1. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 10 PN40 is suitable for classes PN10, PN16, and PN25. Material: EPDM. Working pressure: up to 60 bar. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection set (EN 1092), type SZ1. Included: DIN931 screws - 4 pieces, DIN934 nuts - 4 pieces, and DIN125A washers - 4 pieces. Mechanical property class: A2-70 - screws; A2-70 - nuts. Selection of screws and nuts for flanges according to the table in the appendix. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for ASA flange made according to ASME B16.21 (ANSI) standards. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 15 ASA600 is suitable for ASA300 and ASA400 classes. Material: KLINGER SIL 4430. Working pressure: up to 100 bar. Operating temperature: from -200°C to +400°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for ASA flange made according to ASME B16.21 (ANSI) standards. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed upon with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 15 ASA600 is suitable for ASA300 and ASA400 classes. Material: PTFE. Working pressure: up to 300 bar. Operating temperature: from -200°C to +220°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRound washer according to DIN 125 A. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection set (EN 1092), type SZ2. Included: screws DIN 933 - 4 pieces, nuts - 4 pieces, and washers - 4 pieces. Mechanical property class: A2-70 - screws; A2-70 - nuts. Selection of screws and nuts for flanges according to the table in the attachment. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and robust assembly, ensuring excellent parameters and reliability of the entire installation. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to the standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and robust assembly, ensuring excellent parameters and reliability of the entire installation. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and solid assembly, ensuring excellent parameters and reliability of the entire installation. Material: AISI 321 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe fixed flange is made according to standard EN1092-1, with a neck for welding type 11B, sealing surface type B1, and nominal pressure PN16. The flange connection is one of the most widely used in the industry, primarily for connecting sections of technological pipelines, but also for connections with flexible hoses. Due to its special design, it creates a tight and robust assembly, ensuring excellent parameters and reliability of the entire installation. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket FF for 4" TTMA flange. The permissible working pressure at which the gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). Material: EPDM, SPETOGRAF GUS31, PTFE, viton. Working pressure: up to 60 bar (EPDM), up to 100 bar (SPETOGRAF GUS31), up to 300 bar (PTFE). Operating temperature: from -30°C to +120°C (EPDM), from -200°C to +650°C (SPETOGRAF GUS31), from -200°C to +220°C (PTFE), from -20°C to +200°C (viton).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for flange PN made according to standard PN-EN 1514-1. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 10 PN40 is suitable for classes PN10, PN16, and PN25. Material: SPETOGRAF GUS31. Working pressure: up to 100 bar. Operating temperature: from -200°C to +650°C.
