Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-release coupling plug, double shut-off, very small size DN 2.7 series 20KA, with valve. The plug is available in two variants: with a corrugated hose end and with a nut end for thermoplastic hose. Designed for water, air, nitrogen, and other non-flammable gases. The double shut-off version has a valve in the socket and in the plug, and it is not permissible to connect the single shut-off version with the double shut-off version, as the valve will not open. Flow rate: 165 l/min, Pe = 6 bar, Δp=0.5 bar - air, 3 l/min, Δp=1 bar, KV=0.18 - water. Working pressure: 35 bar. Material: brass, AISI 301 steel (spring and ring), AISI 420 steel (balls). Sealing: NBR. Operating temperature: from -20°C to +100°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-release coupling plug, double shut-off, Eurostandard DN5 (MINI), series 21KB with external or internal BSP thread. The double shut-off version has a valve in the socket and in the plug, and should not be connected with the single shut-off version, as the valve will not open. Widely used in the industry where small dimensions are required with high flow efficiency and low pressure drop. One-handed operation. Working pressure: 35 bar. Material: brass, stainless steel (springs and balls). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-release coupling plug, double shut-off, Eurostandard DN5 (MINI), series 21KB with hose end. Double shut-off version, has a valve in the socket and in the plug, and should not be connected with the single shut-off version as the valve will not open. Widely used in the industry where small dimensions are required along with high flow efficiency and low pressure drop. One-handed operation. Working pressure: 35 bar. Material: brass, stainless steel (springs and balls). Sealing: NBR. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-release coupling plug, double shut-off, with a popular Eurostandard DN7.2 profile featuring a valve, with external or internal BSP or metric thread, for use in pneumatic installations (air, nitrogen, other non-flammable gases). The double shut-off version has a valve in the socket and in the plug, and it is not advisable to connect the single shut-off version with the double shut-off version, as the valve will not open. Easily operated with one hand up to a pressure of 8 bar. Working pressure: 16 bar. Material: brass (stainless steel spring). Sealing: NBR. Flow rate: 734 l/min, Pe=6 bar, Δp=1 bar (air). Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-release coupling plug, double shut-off, with a popular Eurostandard DN7.2 profile, featuring a valve, with a hose connection, for use in pneumatic installations (air, nitrogen, other non-flammable gases). The double shut-off version has a valve in both the socket and the plug, and it is not advisable to connect the single shut-off version with the double shut-off version, as the valve will not open. Easily operated with one hand up to a pressure of 8 bar. Working pressure: 16 bar. Material: brass (stainless steel spring). Sealing: NBR. Flow rate: 734 l/min, Pe=6 bar, Δp=1 bar (air). Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-sided shut-off quick coupling plug series 25 DN 7.4 with internal BSP thread, characterized by a robust construction ensuring perfect sealing and a very high flow coefficient due to the use of the ULTRA-FLO valve. Application: laboratory equipment, sampling of liquids and gases, pneumatic tools. Working pressure: 35 bar. Flow rate: 780 l/min, Pe=6 bar, Δp=0.5 bar, air. Material: brass (plug, threaded part of the plug), brass (valve), AISI 301 steel (spring). Sealing: NBR. Operating temperature: from -20°C to +100°C, depending on the medium.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-sided shut-off quick coupling plug series 25 DN 7.4 with hose end, characterized by a robust construction, ensuring perfect sealing and a very high flow rate due to the use of the ULTRA-FLO valve. Application: laboratory equipment, sampling of liquids and gases, pneumatic tools. Working pressure: 35 bar. Flow rate: 780 l/min, Pe=6 bar, Δp=0.5 bar, air. Material: brass (plug, plug end), brass (valve), AISI 301 steel (spring). Sealing: NBR. Operating temperature: from -20°C to +100°C, depending on the medium.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGromellee quick coupling plug type ISO 6150B DN 5.5 with internal BSP thread, compact design, and very low weight, for air. Working pressure: 16 bar. Operating temperature: from -20°C to +100°C. Flow rate: 700 l/min, Pe = 6 bar, Δp = 0.6 bar. Material: nickel-plated brass (connection), galvanized steel (plug).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGromellee quick coupling plug type ISO 6150B DN 8 with internal BSP thread, compact design, and very low weight, for air. Working pressure: 16 bar. Operating temperature: from -20°C to +100°C. Flow rate: 700 l/min, Pe = 6 bar, Δp = 0.6 bar. Material: nickel-plated brass (connection), galvanized steel (plug).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGromellee quick coupling plug type ISO 6150B DN 8 with external BSPT thread, compact design, and very low weight, for air. Working pressure: 16 bar. Operating temperature: from -20°C to +100°C. Flow rate: 700 l/min, Pe = 6 bar, Δp = 0.6 bar. Material: nickel-plated brass (connection), galvanized steel (plug).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug Gromellee type ISO 6150B DN 5.5 with hose end and compact design crimping sleeve, for air. Working pressure: 16 bar. Operating temperature: from -20°C to +100°C. Flow rate: 700 l/min, Pe = 6 bar, Δp = 0.6 bar. Material: nickel-plated brass (connection), galvanized steel (plug).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGromellee quick coupling plug type ISO 6150B DN 5.5 with a compact design and very low weight, for air. Working pressure: 16 bar. Operating temperature: from -20°C to +100°C. Flow rate: 700 l/min, Pe = 6 bar, Δp = 0.6 bar. Material: nickel-plated brass (connection), galvanized steel (plug).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGromellee quick coupling plug type ISO 6150B DN 8 with a compact design and very low weight, for air. Working pressure: 16 bar. Operating temperature: from -20°C to +100°C. Flow rate: 700 l/min, Pe = 6 bar, Δp = 0.6 bar. Material: nickel-plated brass (connection), galvanized steel (plug).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFull-flow quick coupling plug Nitto Kohki series TSP CUPLA with external BSPT thread, featuring excellent durability, designed for water, hydraulic oils, steam, chemicals, air, and gases. Particularly recommended for high-viscosity fluids such as lubricants. Material: carbon steel. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: from -20°C to +80°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN10.4 quick coupling plug with hose end. Versatile use in the industry, mainly in pneumatic installations. Manufactured according to Eurostandard DN10. Working pressure: 16 bar. Material: hardened galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN10.4 quick coupling plug with external BSPT, NPT thread or internal BSP, NPT thread. Versatile use in the industry, mainly in pneumatic installations. Manufactured according to Eurostandard DN10. Working pressure: 16 bar. Material: hardened galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug CEJN DN5.3 with external BSPT, NPT or internal BSP, NPT thread. Versatile use in the industry, mainly in pneumatic installations. Working pressure: 16 bar. Material: hardened steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN5.3 quick coupling plug with hose end. Versatile use in the industry, mainly in pneumatic installations. Working pressure: 16 bar. Material: hardened steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug CEJN DN7.6 with external thread BSPT, BSP, NPT or with internal thread BSP, NPT. Versatile use in the industry, mainly in pneumatic installations. Manufactured according to Eurostandard 7.2. Working pressure: 16 bar. Material: hardened galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCEJN DN7.6 quick coupling plug with hose end. Versatile use in the industry, mainly in pneumatic installations. Manufactured according to Eurostandard 7.2. Working pressure: 16 bar. Material: hardened galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with internal BSP thread, knurled, intended for cold and hot water. Material: brass. Working pressure: 16 bar. Sealing: EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki series SP CUPLA type A plug with shut-off valve, featuring internal BSPT thread, excellent durability, designed for water, hydraulic oils, steam, chemicals, air, and gases. Material: chrome-plated steel. Working pressure: 75 bar (1/8", 1/4", 3/8"), 45 bar (1/2", 3/4", 1"), 30 bar (1.1/4", 1.1/2"), 20 bar (2"). Operating temperature: from -20°C to +80°C (NBR).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external threaded plug with a key flat, intended for cold and hot water. Material: brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNitto Kohki series SP CUPLA type A shut-off valve plug with external BSPT thread, featuring excellent durability, intended for water, hydraulic oils, steam, chemicals, air, and gases. Material: brass. Working pressure: 50 bar (1/8", 1/4", 3/8"), 30 bar (1/2"). Operating temperature: from -20°C to +180°C (viton).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with external NPT thread, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and securing sleeve, it has a very low weight. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic installations, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] - total length. Material: UV polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with external NPT thread, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotations of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic installations, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] - total length. Material: polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick-connect plug with external NPT thread intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: acetal. Sealing: NBR o-ring. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick-connect plug with external NPT thread intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMedium-sized quick-connect plug with a hose nut, intended for washing installations, deionized water filtration, industrial machines, leak detection, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 8.3 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with free flow series 25 DN 7.8 with external BSP thread, characterized by very high flow rate. Application: all fields of modern technology, industry, craftsmanship - for compressed air, liquids, and gases. Performance: 1800 l/min, Pe=6 bar, Δp=0.5 bar, air. Working pressure: 35 bar. Material: AISI 316Ti and AISI 303 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with a popular Eurostandard DN7.2 profile without a valve, with external or internal BSP thread, intended for compressed air, gases, liquids of low and medium viscosity. The plugs are interchangeable with all Eurostandard DN7.2 ÷ 7.8 from other manufacturers. Working pressure: up to 25 bar. Material: nickel-plated steel. Operating temperature: from -20°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal quick coupling plug with free flow of large diameter with external BSP thread, primarily intended for compressed air. Performance: 12000 l/min at inlet pressure Pe=6 bar, Δp=0.5 bar, air. Material: hardened, galvanized steel. Working pressure: 20 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsANFOR lever connector plug with external BSP thread for use in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Working pressure: from 5 bar to 19 bar (depending on the size of the connector). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsANFOR lever connector with flange PN 10 for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Working pressure: from 5 bar to 19 bar (depending on the size of the connector). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBauer lever connector plug with external BSP thread, widely used in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Working pressure: 20 bar (up to size 89 mm), 12 bar (for sizes above 89 mm). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBauer lever connector plug with PN 10 flange, widely used in agricultural operations, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: carbon steel, galvanized. Working pressure: 20 bar (up to size 89 mm), 12 bar (for sizes above 89 mm). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector plug KLAUDIA finished with a PN10 flange with wide applications: for unloading cement wagons, in needle filter installations IGE (ground dewatering installations), agricultural farms, tank trucks, irrigation systems, industry, and construction. Material: aluminum. Working pressure: up to 8 bar (water), up to 3 bar (air). Operating temperature: from -25°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector plug with PN 10/16 flange for wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of gasket material. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector plug with "tail" for hose with wide applications, e.g.: for the transfer and unloading of bulk materials (grains, flours, feeds, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector plug with a weldable connection for wide applications, e.g.: for the transport and unloading of bulk materials (grains, flour, feed, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
