Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector plug with a flared end for hose, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: AISI 316L steel. Working pressure: up to 10 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector (tank part) of the dry disconnect coupling DRY-LINK. The couplings feature a unique design that ensures safe and completely leak-free connection of installations (the amount of medium remaining on the valve surface after disconnection is immeasurable). DRY LINK couplings are characterized by: low weight, small dimensions, and compact construction - allowing easy operation in tight spaces, ease of handling by trained operators, difficulty of disconnection by unauthorized individuals, high, unobstructed flow through the coupling with low pressure drop – thanks to thin valve discs arranged parallel to the flow, ease of cleaning, smooth internal passage, few internal parts, absence of dead spaces – DRY LINK couplings are ideal for high-viscosity fluids and applications requiring a high level of cleanliness (food, pharmaceutical, cosmetic substances, paints, adhesives), DRY LINK couplings can also be used for powders and in the petrochemical industry. Material: AISI 316 steel. Sealing: PTFE, viton, EPDM, or chemraz®. Connections: BSP or NPT. Working pressure: 14.3 bar for DN25 and DN40 couplings, 10.3 bar for DN50 couplings, 8.3 bar for DN80 couplings. Vacuum: up to 0.94 bar. Operating temperature: from -29°C to +110°C (viton, EPDM, chemraz®), from -7°C to +110°C (PTFE).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDry-mate disconnect connector plug with internal thread made of polypropylene. Used in the chemical, pharmaceutical, agriculture, and handling systems industries. Not intended for gas media and liquids with a low flash point. Installed on the pressure side (tank side). The plug design is based on a ball valve, which ensures completely unobstructed flow. The plug is supplied with polypropylene caps. Material: body - glass fiber reinforced polypropylene, ball - PTFE, CAMLOCK latches - AISI 316 steel. Sealing: valve - PTFE. Working pressure: up to 7 bar. Operating temperature: 21°C (up to 66°C at a working pressure of 5 bar). Maximum leakage: 2 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfessional, one-piece ball shut-off valve of European production, with a body made of brass casting, featuring a straight plastic lever (with a replaceable label in colors: standard red; available yellow, blue, green, white), intended for industrial installations. It can be used for air, neutral gases, water, chemicals, petrochemical products, etc., free from solid contaminants, compliant with the chemical resistance of the valve materials. It has a stem blow-out protection. Meets the requirements of the Pressure Equipment Directive PED 2014/68/EU, regarding good engineering practice (SEP), in accordance with Article 4, paragraph 3. Compliant with the RoHS material directive 2011/65/EU and REACH regulation 1907/2006, does not contain silicones. Available versions of these valves with stem sealing made of Viton: PTFE / FKM (valve working temperature: -15°C to +130°C) and on special order versions PTFE / EPDM (-40°C to +130°C) and PTFE / HNBR (-30°C to +130°C). The working pressure of these versions depends on the working temperature. The stated minimum working temperature applies to the valve emptied of freezing liquid. Can operate under vacuum: -0.99 bar. Q – air flow at an inlet pressure of 6 bar and pressure drop Δp=1 bar, expressed in liters at atmospheric pressure [Nl]; Kv - flow coefficient of the valve expressed in metric units (water flow in m³ per hour at pressure drop Δp=1 bar). Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: polyamide (PA 66). Ball sealing: PTFE. Stem sealing: NBR. Connection: BSP thread (ISO 228-1) / BSP and BSPT thread (ISO 7-1). Working temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Giant system strap clamps. Heavy-duty clamps (for hoses with large diameters - over 150 mm). Clamps with so-called "noses" secure the end of the strap after bending. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for quick coupling socket with chain to protect against contamination and damage. Material: chrome-plated brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for ANFOR lever connector. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for LAUX 42 lever connector. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNOR blind cap with chain intended for symmetrical connections of the STORZ type designed according to the Norwegian national standard. Material: bronze. Sealing: NBR. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind cover for quick coupling (for socket and plug) protecting against dirt and mechanical damage, for series 1100 and 1100N. The use of covers increases the lifespan of the quick coupling. Material: high-strength PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind cap cover for quick couplings (for socket and plug) protecting against dirt and mechanical damage, for series 1300 and 1300N. The use of caps (covers) increases the lifespan of the quick coupling. Material: high-strength PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind cover for quick coupling socket and plug, protecting against dirt and mechanical damage, for series 1800 and 1800N. The use of covers increases the lifespan of the quick coupling. Material: high-strength PVC.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass cap for nut. Range of external diameters of pipes from 4 to 22 mm. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ blind cap, equipped with a drain valve without a chain, intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. With a symmetrical design of the connection part, it easily connects with each other. Elements with the same coupling spacing can be connected. Material: aluminum. Working pressure: 16 bar. Seal: white NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for quick coupling water NiTO 1". Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe plug cap for CAMLOCK SAFETY BUMP connectors is an alternative solution to traditional CAMLOCK connector caps, due to its specially designed handle that facilitates hose operation. It is used in the chemical and petrochemical industries. It is made in an antistatic version in black from composite material reinforced with fiberglass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for ANFOR lever connector. Material: galvanized steel. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for BAUER lever connector. Material: carbon steel, galvanized. Sealing: NR/SBR. Working pressure: 20 bar (up to size 89 mm), 12 bar (for sizes above 89 mm). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug intended for the FERRARI lever connector, type F.5B, used among others in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for LAUX 42 lever connector. Material: AISI 316 steel. Sealing: EPDM. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for LAUX 42 lever connector. Material: carbon steel, galvanized. Sealing: EPDM. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGUILLEMIN connector cap with chain. It has a symmetrical design of the connection part. Manufactured according to standard EN 14420-8/NF-E-29572. Material: aluminum. Working pressure: 16 bar. Sealing: white NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGUILLEMIN connector cap with chain. It has a symmetrical design of the connection part. Manufactured according to standard EN 14420-8/NF-E-29572. Material: AISI 316 steel. Working pressure: 16 bar. Sealing: black FKM-VITON rubber. Operating temperature: from -10°C to +180°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug for ROTTA ROTH connector with chain. It has a symmetrical design of the connection part. Material: bronze. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSMS connector cap (Sweden) with chain. It has a symmetrical design of the connection part. Material: bronze. Working pressure: 10 bar. Sealing: NBR rubber. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details2" valve for pallet container made entirely of durable polypropylene, eliminating any corrosion. The valve is additionally equipped with a locking latch and a cap. Lever in blue color. Valve outlet connection: GZ S60x6. Material: polypropylene. Sealing: none. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details2" valve for pallet container made entirely of durable polypropylene, eliminating any occurrence of corrosion. Standardly equipped with an EPDM seal. The valve is additionally equipped with a lever lock (in the form of a screw) and a two-part cap. Lever in red color. Valve outlet connection: GZ S60x6. Material: polypropylene. Sealing: EPDM. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details2" valve for pallet container made entirely of durable polypropylene, eliminating any occurrence of corrosion. Standardly equipped with a PTFE seal. The valve is additionally equipped with a lever lock (in the form of a screw) and a two-part cap. Lever in red color. Valve outlet connection: GZ S60x6. Material: polypropylene. Sealing: PTFE. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details2" valve for pallet container made entirely of durable polypropylene, eliminating any occurrence of corrosion. Standardly equipped with a Viton (FKM) seal. The valve is additionally equipped with a lever lock (in the form of a screw) and a two-part cap. Lever in blue color. Valve outlet connection: GZ S60x6. Material: polypropylene. Sealing: Viton (FKM). Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Details2" valve for pallet container made entirely of durable polypropylene, eliminating any occurrence of corrosion. Standardly equipped with a PTFE seal. The valve is additionally equipped with a lever lock (in the form of a screw) and a cap. Lever in yellow color. Valve outlet connection: GZ 2" NPT. Material: polypropylene. Sealing: PTFE. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass mushroom valve with STORZ type fire connection at the outlet (connection made of aluminum or brass, white NBR seal) used as basic equipment for fire hydrant cabinets (fire protection systems, residential buildings, etc.). Connection to the installation with external thread (from 1" to 2.1/2"). Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 7224 with full bore, intended for gas installations, in pressure class MOP 5. Complies with the requirements of the PED directive 2014/68/EU and 2009/142/EC, in accordance with standard EN 331 + A1. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: BSP/Gas BSPT. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBall valve for compressed air, intended for pneumatic hammers. Working pressure: 25 bar. Body material: galvanized carbon steel. Ball material: chrome-plated brass. Lever material: galvanized carbon steel. Ball sealing: PTFE. Operating temperature: from -20°C to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBall valve for compressed air and water. Body material: galvanized carbon steel. Ball material: chrome-plated brass. Ball sealing: PTFE. Inlet with internal thread, outlet with external thread or with cast iron claw connections with a pitch of 42 mm, with rubber (NBR) or brass sealing. Lever with end stop. Equipped with venting. Working pressure: 10 bar. Operating temperature: from -20°C to +100°C. Robust, maintenance-free design. Used in compressors and construction and industrial equipment.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4420 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED Directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: GZ BSPT. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4424 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: GZ BSPT. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe angular shut-off valve with external BSP thread is used to stop the flow of the medium in the installation. It is intended for air installations, and it can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). The shut-off valve is closed by manually turning the knob, which moves the ball until it is completely sealed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Ball material: stainless steel AISI 304. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe inline shut-off valve with BSP external thread is used to stop the flow of the medium in the installation. It is intended for air installations, and it can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). The closure of the shut-off valve is achieved by manually turning the knob, which moves the ball until it is completely sealed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Ball material: stainless steel AISI 304. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe angled drain valve with external BSP thread is used to release air, for example, to equalize pressure in the system. It can also be used to remove condensate from it. Compressed air may contain water vapor, which upon condensation turns into a mixture of water and oil called condensate. If not removed, it can cause failures in both the system components and the compressed air receivers. Mounting position - any. Body material: brass. Disc material: brass. Sealing: NBR. Operating temperature: from 0°C to +90°C. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight drain valve with metal-metal sealing and BSP external thread is used to release air, for example, to equalize pressure in the system. It can also be used to remove condensate from it. Compressed air may contain water vapor, which upon condensation turns into a mixture of water and oil called condensate. If not removed, it can cause failures in both system components and compressed air receivers. Mounting position - any. Body material: nickel-plated brass. Disc material: brass. Sealing: NBR. Operating temperature: from 0°C to +90°C. Working pressure: 25 bar.
