Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWelding stub, type WRS, for flange EN 1092-1 PN16 for installation with RS shell clamp or for tightening with sleeve TI-LR, TI-LDR. Material: carbon steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket and plug (reducer) of CAMLOCK DA connection made according to the American military standard MIL-C-27487 (A-A-59326). Commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connection. Material: aluminum. Levers: AISI 304 steel (in sizes 1.1/4" to 4" - levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for flange PN made according to standard PN-EN 1514-1. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 10 PN40 is suitable for classes PN10, PN16, and PN25. Material: KLINGER SIL 4430. Working pressure: up to 100 bar. Operating temperature: from -200°C to +400°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for flange PN made according to standard PN-EN 1514-1. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 10 PN40 is suitable for classes PN10, PN16, and PN25. Material: PTFE. Working pressure: up to 300 bar. Operating temperature: from -200°C to +220°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrari lever connector plug with hose end, type F.8, for use in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBlind plug intended for the FERRARI lever connector socket, type F.6B, used among others in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic dispensing gun type 227 made of aluminum with a flow rate of 60 l/min, intended for diesel fuel. Standardly equipped with a swivel connection 1" BSP, which prevents hose twisting. Features an automatic fuel shut-off system. Designed for compatibility with all dispensers at fuel stations. Not intended for AdBlue® or unleaded gasoline. Outlet diameter: 24 mm. Material: rubber-coated aluminum. Color: black. Flow rate: 60 l/min. Swivel connection: yes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect socket for wall mounting with hose end, with and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. The ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotations of the connected hose, preventing twisting and accidental disconnection. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 4.2 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket DN11.8 with external thread facilitating quick connection of the water gun to the hose or other washing accessories. Material: AISI 303/304L steel. Ball material: AISI 316 steel. Sealing: viton. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 1/2" with hose end. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling socket with hose end. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK C connector socket with ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar - depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector socket with flared end for hose, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Sealing: SBR. Working pressure: up to 10 bar (up to 8 bar for size 216 mm).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose end with external BSPT thread. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType CNP end with external BSPT tapered thread made of galvanized steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp designed for securing hoses on standard ends (smooth) with a safety flange. Material: AISI 316 steel. Working pressure 25 bar (with appropriately selected hose and end EN 14420-3).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part clamp, manufactured in accordance with (for hose diameter 38 mm) or similar (from hose diameter 50 mm) to DIN 20039 A standard, with separate inserts - "pressure tongues." Designed for mounting ends and connections with the hose part ("tail") without a lock (safety flange), made of high-quality ductile cast iron galvanized (with yellow passivation free of hexavalent chromium). Indices from LU-SL-400 to LU-SL-988 are additionally reinforced and intended for large diameters. Material: galvanized ductile cast iron. With proper installation, appropriately selected hose, and end fitting, working pressure up to 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBX type steel sealing ring designed for connecting and sealing specially machined flanges with grooves. It features a hole for pressure equalization. This type of ring can be used exclusively with API BX flanges and grooves. Used in connections for high pressures and temperatures. Detailed information on the dimensions of the ring is attached. Material: carbon steel. Working pressure: up to 1500 bar. Operating temperature: from -40°C to +500°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight fitting with external BSPT thread type AI 13480 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsH-type clamp sleeve used for securing hoses on ends without a locking mechanism connecting the sleeve to the end. It can also be used on NiTO ends and quick-connect ends. Low-pressure hoses up to approximately 30 bar (depending on diameter) made from various materials can be used with clamp sleeves, provided that the hose material is sufficiently soft for this type of clamp. Primarily rubber hoses with textile reinforcement and PVC hoses. There is also the possibility of crimping hoses with a steel braid (e.g., PZ type hose). The internal diameter of the sleeve should be selected according to the external diameter of the hose, while ensuring that the diameter of the hole at the front of the sleeve matches the used end. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - hole diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-type sleeve designed for crimping hydraulic type ends (ends for high-pressure hoses type Z) in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral - suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L should not exceed the length of the tail of the end Lk. Diameter D1 [mm] - external diameter. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - locking diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector plug ANFOR with "tail" for hose use, among others, in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong screw clamp with a hinged closure for heavy loads features a durable construction and two solid pins. Recommended for tight connections of thick-walled, reinforced industrial hoses. The clamp is made from high-quality steel band with a width ranging from 18 mm to 26 mm. The rolled edges of the band prevent damage to the surface of the hose on which the clamp operates. The clamp has markings on the band indicating the minimum and maximum diameter as well as the material from which it is made. Thanks to the hexagonal head of the screw, commonly used tools such as flat wrenches, socket wrenches, and adjustable wrenches can be utilized. Material: all components made of AISI 316 stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gate valve type 2029 with metal-metal sealing and non-rising stem, intended for industrial installations. Allows for regulation or throttling at low flow rates. Maximum constant working pressure across the full temperature range. Body material: AISI 316 steel. Disc material: AISI 316 steel. Handwheel material: aluminum. Stem sealing: PTFE. Connection: BSP thread. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with internal trapezoidal thread (rotating or fixed nut) compliant with DIN EN 12713 standard and hose end. The trapezoidal threads, which are standardly equipped on IBC connectors, are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / Detailscoupling plug for transfer coupling type VK with internal BSP thread. Designed for installation on hose ends or piping systems with external BSP thread. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Intended for liquids, bulk materials, and gases (excluding liquefied gas and vapor). Material: brass. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Thread sealing (seal type GD): polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAutomatic dispensing gun type 227X made of stainless steel with a flow rate of 40 l/min, intended for AdBlue and water. Standardly equipped with a swivel connection GW 1" BSP, which prevents hose twisting. Features an automatic medium shut-off system. Designed for compatibility with all dispensers at fuel stations. Not intended for diesel fuel or unleaded gasoline. Outlet diameter: 18 mm. Material: stainless steel coated with rubber. Color: blue. Flow rate: 40 l/min. Swivel connection: yes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever valve allowing for quick opening and closing of flow. The design of the valve with a double-jointed disc ensures good sealing. Used in agriculture, equipment for sewage tankers, and in industry. Complies with the requirements of the PED Directive 2014/68/EU. Maximum constant working pressure across the full range of operating temperatures. Body material: brass. Valve material: brass. Lever material: carbon steel. Stem sealing: fiber. Body sealing: NBR. Connection: BSP thread. Operating temperature: from -20°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket NiTO made of AISI 316L stainless steel with internal BSP thread. Used in conditions with increased hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., socket 1/2″ with plug 3/4″. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with internal BSP thread for free flow, intended for cold and hot water. The double-sided seal of the socket without a valve seals both the plug and the threaded connection to the installation, ensuring high durability. Material: brass (balls, spring - stainless steel). Working pressure: 16 bar. Sealing: EPDM (approved for KTW, DVGW W270 for drinking water). Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling socket with external NPT thread. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector socket ANFOR with "tail" for hose for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrari lever connector socket with hose end, type F.7, for use in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type B with external BSPT thread. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCND connector corrugated intended for rubber hoses and industrial plastic hoses made of galvanized steel. Designed for assembly using straps or clamps. For multiple assembly and disassembly. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass angle connector type AI 13260 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part clamp according to DIN 20039 B, with hooks ("claws") and separate pressure pads ("tongues"), made of high-quality ductile cast iron galvanized (with yellow passivation free from hexavalent chromium). Designed for securing hoses, with a connection to the hose part featuring a locking mechanism. Indices marked with the letters "FL" are intended for flat hoses. Material: galvanized ductile cast iron. With proper installation, appropriately selected hose, and fitting, working pressure up to 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp designed for securing hoses on standard ends (smooth) with a securing flange. Material: clamps - aluminum, screws and nuts - galvanized carbon steel. Working pressure: 25 bar (with appropriately selected hose and end EN 14420-3).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSteel sealing ring with an octagonal cross-section type R designed for connecting and sealing specially machined flanges with a groove. The octagonal cross-section ring provides greater sealing integrity than an oval cross-section ring. Used in connections for high pressures and temperatures. Detailed information on the dimensions of the ring is attached. Material: carbon steel. Working pressure: up to 700 bar. Operating temperature: from -40°C to +500°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsH-type clamp sleeve used for securing hoses on ends without a locking mechanism connecting the sleeve to the end. It can also be used on NiTO ends and quick-connect ends. Low-pressure hoses (up to approx. 30 bar depending on diameter) made from various materials can be used with clamp sleeves, provided that the hose material is sufficiently soft for this type of clamp. Primarily rubber hoses with textile reinforcement and PVC hoses. There is also the possibility of crimping hoses with steel braiding (e.g., type PZ hose). The internal diameter of the sleeve should be selected according to the external diameter of the hose, while ensuring that the diameter of the hole at the front of the sleeve matches the used end. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - hole diameter. Material: AISI 304 steel.
