Is the CAMLOCK F connector plug with male thread, polypropylene compatible with both BSPT and NPT threaded ports and rated for up to 7 bar working pressure?

Yes. The CAMLOCK F connector plug with male thread, polypropylene is manufactured with external BSPT or NPT threads per MIL-C-27487 (A-A-59326), so it is compatible with both BSPT and NPT threaded ports. It is specified for working pressures up to 7 bar (depending on connector size) and is made of fiberglass-reinforced polypropylene.

Can the CAMLOCK F connector plug with male thread, polypropylene withstand chemical exposure common in petrochemical transfer applications?

Yes. The CAMLOCK F connector plug with male thread, polypropylene (fiberglassâreinforced) is designed for transfer use in the petrochemical industry and offers good chemical resistance to many hydrocarbons, acids and alkalis commonly encountered in such applications. Its MILâCâ27487 (AâAâ59326) design and working pressure up to 7 bar (sizeâdependent) make it suitable for typical transfer duties. However, polypropylene has limitations: it can be attacked by strong chlorinated solvents, hot aromatic hydrocarbons, and certain aggressive chemicals at elevated temperatures or pressures. For critical services, prolonged exposure, or unknown fluids, verify compatibility with the specific chemical, concentration, temperature and pressure; when in doubt, consult the manufacturer or use a higherâresistance material.

Does the CAMLOCK F connector plug with male thread, polypropylene require specific installation torque for BSPT or NPT joints?

Yes. The CAMLOCK F connector plug with male thread, polypropylene requires appropriate installation torque for BSPT or NPT joints to ensure a reliable, leak-free seal and to avoid damage to the polypropylene reinforced with fiberglass. Key points: - BSPT and NPT are tapered pipe threads that seal by metal/plastic deformation and thread engagement; correct torque ensures proper thread compression without over-stressing the polypropylene. - Because the material is fiberglass-reinforced polypropylene (less ductile than metal), avoid overtightening. excessive torque can crack or strip threads and deform the sealing surfaces. - Use a torque value appropriate for the connector size and material. If manufacturer torque specs are not provided, follow general torque guidance for plastic fittings of similar diameter and thread type, or consult a torque table for BSPT/NPT in plastic (typical recommended torque ranges vary with size; small sizes require lower torque, larger sizes higher). - Apply suitable thread sealant (PTFE tape or pipe dope rated for polypropylene and the media) on male threads, wrapped in the correct direction for the thread type, and avoid excessive layers which can increase required torque. - Install using proper tools and hand-tighten initially, then apply controlled torque with a torque wrench to the specified value or until a snug, leak-free seal is achieved without stressing the part. - For critical or high-pressure applications (up to the connectorâs 7 bar rating), testing for leaks after installation and periodic inspection are recommended. If exact torque values are required, request manufacturer-specified torques for the CAMLOCK F connector plug with male thread, polypropylene by size and thread type (BSPT/NPT).

CAMLOCK F connector plug with male thread, polypropylene

Additional information

Material	P – material (plastic)
Standard length [m]	120

CAMLOCK F connector plug with external BSPT or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-F-050-P	CAMLOCK F 3/4" connector, GZ 1/2" polypropylene	-	5	In stock	Enquiry
AC-F-050-PX	CAMLOCK F 1/2" connector, polypropylene	-	5	In stock	Enquiry
AC-F-075-P	CAMLOCK F 3/4" polypropylene connector	-	7	In stock	Enquiry
AC-F-075-PX	CAMLOCK F 3/4" connector, polypropylene	-	7	In stock	Enquiry
AC-F-100-200-P	CAMLOCK F 1" connector with GZ 2" BSP, polypropylene	-	7	In stock	Enquiry
AC-F-100-P	CAMLOCK F 1" polypropylene connector	-	7	In stock	Enquiry
AC-F-100-PX	CAMLOCK F 1" connector, polypropylene	-	7	In stock	Enquiry
AC-F-125-125-P	CAMLOCK F 1.1/4" connector, GZ 1.1/4" polypropylene	-	7	In stock	Enquiry
AC-F-125-150-P	CAMLOCK F 1.1/2", GZ 1.1/4" polypropylene connector	-	7	In stock	Enquiry
AC-F-125-P	CAMLOCK F 1" connector, GZ 1.1/4" polypropylene	-	7	In stock	Enquiry
AC-F-150-P	CAMLOCK F 1.1/2" polypropylene connector	-	7	In stock	Enquiry
AC-F-150-PX	CAMLOCK F 1.1/2" connector, polypropylene	-	7	In stock	Enquiry
AC-F-200-P	CAMLOCK F 2" polypropylene connector	-	7	In stock	Enquiry
AC-F-200-PX	CAMLOCK F 2" connector, polypropylene	-	7	In stock	Enquiry
AC-F-300-P	CAMLOCK F 3" polypropylene connector	-	4	In stock	Enquiry
AC-F-300-PX	CAMLOCK F 3" connector, polypropylene	-	4	In stock	Enquiry
AC-F-400-P	CAMLOCK F 4" polypropylene connector	-	4	In stock	Enquiry
AC-F-400-PX	CAMLOCK F 4" connector, polypropylene	-	4	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

CAMLOCK F connector plug with external BSPT or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass.