Is the Collet for hydraulic hoses 2ST, 4SP, zinc-nickel carbon steel, type ZF2 suitable for external machining installation on all hose diameters D1?

Collet for hydraulic hoses 2ST, 4SP, zinc-nickel carbon steel, type ZF2 Format: Based on the provided description, the Collet for hydraulic hoses 2ST, 4SP, zinc-nickel carbon steel, type ZF2 is intended for external machining installation on rubber hydraulic hoses type 2ST (R2A) or 4SP. The specification gives D1 as the outer diameter (mm) and lists material and coating but does not state a universal compatibility with all hose diameters. Therefore you cannot assume it is suitable for all D1 values.compatibility depends on the collet size matching the specific hose outer diameter. Confirm suitability by selecting the ZF2 collet size that corresponds to the hose outer diameter D1 or consult the manufacturer's size chart/data sheet to ensure proper fit and secure clamping.

Does the Collet for hydraulic hoses 2ST, 4SP, zinc-nickel carbon steel, type ZF2 support external machining installation on non-standard D1 sizes?

Yes. Collet for hydraulic hoses 2ST, 4SP, zinc-nickel carbon steel, type ZF2 supports external machining installation on non-standard D1 sizes. The product description specifies "Installation - external machining" and lists D1 as the outer diameter, so external machining can be applied to non-standard outer diameters within the material limits (carbon steel, zinc-nickel coating 6â10 Âµm). Ensure the chosen non-standard D1 remains within the mechanical tolerances and strength requirements for safe clamping and the coatingâs corrosion protection.

Can the Collet for hydraulic hoses 2ST, 4SP, zinc-nickel carbon steel, type ZF2 withstand salt spray corrosion testing up to 720 hours?

Yes. The Collet for hydraulic hoses 2ST, 4SP, zinc-nickel carbon steel, type ZF2 can withstand salt spray corrosion testing up to 720 hours. Its surface is coated with a zinc-nickel layer 6â10 Âµm thick, which is specified to provide very high corrosion resistance. explicitly stated as up to 720 hours without corrosion in a salt spray chamber.

Collet for hydraulic hoses 2ST, 4SP, zinc-nickel carbon steel, type ZF2

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

ZF2 clamping sleeve for rubber hydraulic hoses type 2ST (R2A) or 4SP. Installation – external machining. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Diameter D1 [mm] – outer diameter. Material: carbon steel, zinc-nickel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZF2-04-CN	Sleeve for hose 2ST(R2A) and 4SP 1/4", Zn-Ni	6	-	In stock	Enquiry
TI-ZF2-05-CN	Sleeve for hose 2ST(R2A) 5/16", Zn-Ni	8	-	In stock	Enquiry
TI-ZF2-06-CN	Sleeve for hose 2ST(R2A) and 4SP 3/8", Zn-Ni	10	-	In stock	Enquiry
TI-ZF2-08-CN	Sleeve for hose 2ST(R2A) and 4SP 1/2", Zn-Ni	12	-	In stock	Enquiry
TI-ZF2-10-CN	Sleeve for hose 2ST(R2A) and 4SP 5/8", Zn-Ni	16	-	In stock	Enquiry
TI-ZF2-12-CN	Sleeve for hose 2ST(R2A) and 4SP 3/4", Zn-Ni	20	-	In stock	Enquiry
TI-ZF2-16-CN	Sleeve for hose 2ST(R2A) and 4SP 1", Zn-Ni	25	-	In stock	Enquiry
TI-ZF2-20-CN	Sleeve for hose 2ST(R2A) and 4SP 1.1/4", Zn-Ni	32	-	In stock	Enquiry
TI-ZF2-24-CN	Sleeve for hose 2ST(R2A) and 4SP 1.1/2", Zn-Ni	38	-	In stock	Enquiry
TI-ZF2-32-CN	Sleeve for hose 2ST(R2A) and 4SP 2", Zn-Ni	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

ZF2 clamping sleeve for rubber hydraulic hoses type 2ST (R2A) or 4SP. Installation – external machining. Surface coated with zinc-nickel with a layer thickness of 6-10 µm, which is characterized by very high corrosion resistance (up to 720 hours without corrosion in a salt spray chamber). Diameter D1 [mm] – outer diameter. Material: carbon steel, zinc-nickel.