Can the FINN-POWER P16 HP press with manual hydraulic pump drive be used on-site and read crimping diameter with the battery-operated indicator?

Yes. The FINN-POWER P16 HP press with manual hydraulic pump drive is designed for mobile use.repair workshops, technical vehicles and service points.and its compact, lightweight design allows on-site repairs at the failure location. It features an electric (battery-operated) indicator to read and achieve the correct crimping diameter. Note that crimping diameter range depends on the interchangeable jaw sets (ordered separately): to cover 10â38 mm youâll need 8 standard jaw sets (FP-16-10 to FP-16-31), and the maximum crimping diameter up to 45 mm is achieved using the main jaws.

Does the FINN-POWER P16 HP press brake support interchangeable jaw sets for different crimping diameter ranges?

Yes. The FINN-POWER P16 HP press brake supports interchangeable jaw sets (ordered separately). For a crimping diameter range of 10â38 mm you would order 8 standard jaw sets (FP-16-10 to FP-16-31); the largest crimp up to 45 mm is achieved using the main jaws. The unit features a manual hydraulic pump drive, compact lightweight design for field repairs, and an electric (battery-operated) indicator for achieving the crimping diameter.

Is the FINN-POWER P16 HP press brake compatible with main jaws to reach a maximum crimping diameter of 45 mm?

Yes. The FINN-POWER P16 HP press is compatible with interchangeable jaw sets and can reach a maximum crimping diameter of up to 45 mm when using the main jaws. For intermediate ranges (10â38 mm) order the appropriate standard jaw sets (FP-16-10 to FP-16-31) separately; the largest diameter (up to 45 mm) is achieved with the main jaws.

FINN-POWER P16 HP press brake

Additional information

Standard length [m]	50

P16 HP press with manual hydraulic pump drive, intended for repair workshops, technical vehicles, service points, etc. Compact design and low weight allow for repairs at the site of failure. Electric (battery-operated) indicator for achieving the crimping diameter. All FINN-POWER crimping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a crimping diameter range from 10 to 38 mm, 8 sets of standard jaws from FP-16-10 to FP-16-31 should be ordered, with the largest crimping diameter of up to 45 mm achieved using the main jaws.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
FP-P16HP	FINN POWER type P16 HP crimping press	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

P16 HP press with manual hydraulic pump drive, intended for repair workshops, technical vehicles, service points, etc. Compact design and low weight allow for repairs at the site of failure. Electric (battery-operated) indicator for achieving the crimping diameter. All FINN-POWER crimping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a crimping diameter range from 10 to 38 mm, 8 sets of standard jaws from FP-16-10 to FP-16-31 should be ordered, with the largest crimping diameter of up to 45 mm achieved using the main jaws.