Is the Plug end with SKV INTERLOCK with lock nut for hose (2"), galvanized steel compatible with hydraulic hoses type 4SH, R13, and R15?

Yes. The Plug end with SKV INTERLOCK with lock nut for hose (2"), galvanized steel is compatible with hydraulic hoses type 4SH, R13, and R15 in 2" size. The product description explicitly states it is a plug coupling with a locking nut and INTERLOCK type "tail" designed for hydraulic hoses type 4SH, R13, R15 (size 2"), with NBR sealing and galvanized steel construction, which confirms compatibility.

Does the Plug end with SKV INTERLOCK with lock nut for hose (2"), galvanized steel use NBR seals suitable for 4SH, R13, and R15 hoses?

Yes. Plug end with SKV INTERLOCK with lock nut for hose (2"), galvanized steel uses NBR seals and is designed for hydraulic hoses type 4SH, R13, and R15 in size 2".

Can Plug end with SKV INTERLOCK with lock nut for hose (2"), galvanized steel be used for high-pressure hydraulic systems with 4SH, R13, R15?

Yes. Plug end with SKV INTERLOCK with lock nut for hose (2"), galvanized steel can be used for high-pressure hydraulic systems with hoses type 4SH, R13, R15, provided system parameters fall within the componentâs rated specifications. Why it fits: - The product description explicitly states it is designed for hydraulic hoses type 4SH, R13, R15 (2"), so geometric and connection compatibility is intended. - Material: galvanized steel offers good mechanical strength and corrosion resistance suitable for many hydraulic applications. - Sealing: NBR (nitrile) is commonly used in hydraulic seals and performs well with mineral oils and typical hydraulic fluids across moderate temperature ranges. Key checks before use: - Pressure rating: confirm the plug couplingâs maximum working pressure and burst pressure meet or exceed your systemâs maximum operating pressure, spikes and test pressure. Hose types 4SH, R13, R15 are rated for very high pressures, so matching the coupling rating is critical. - Temperature and fluid compatibility: verify NBR is compatible with the hydraulic fluid and operating temperature range (NBR has limits around -30Â°C to +100Â°C depending on formulation). - Assembly and installation: ensure correct assembly torque for the lock nut and proper hose crimping per manufacturer instructions to avoid leaks or failures. - Standards and certification: check compliance with applicable standards (ISO, SAE) and manufacturerâs installation guidelines for high-pressure applications. - Safety factors: ensure appropriate safety margins and consider dynamic loads, pulsing, and vibration. Conclusion: Functionally compatible by design, but safe use in high-pressure systems requires verifying the specific coupling pressure ratings, NBR temperature/fluid limits, and correct installation for your application.

Plug end with SKV INTERLOCK with lock nut for hose (2″), galvanized steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

SKV plug coupling with a locking nut and INTERLOCK type “tail” designed for hydraulic hoses type 4SH, R13, R15 (in size 2″). Sealing: NBR. Material: galvanized steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
TI-SKV-IL-M-32-32	End plug SKV INTERLOCK 2" with locking nut, hose 2"	-	420	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

SKV plug coupling with a locking nut and INTERLOCK type “tail” designed for hydraulic hoses type 4SH, R13, R15 (in size 2″). Sealing: NBR. Material: galvanized steel.