Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini lubricator designed for direct connection to pneumatic tools, such as pneumatic wrenches, grinders, etc., for lubricating tools with an oil mist. Due to the short distance from the lubricator to the tool, a constant supply of oil is ensured. The fill level is always visible. This solution protects internal components from corrosion and reduces wear on cooperating elements. The oil mist is created by the flowing air stream. The oil dosing is factory-set and amounts to approximately 50 mm³ per 1m³ of flow. One dose lasts for about 10 hours at a flow rate of 109 l/min. Oil (index: EW-583) must be ordered separately. Maximum working pressure: 8 bar (recommended 6.2 bar). Operating temperature: from -5°C to +60°C. Material: NBR (sealing), aluminum (housing), acetal (tank).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum gun with a 360° rotating nozzle Ø 3 mm, with flow rate adjustment. Utilizes vacuum to draw low-viscosity fluid from the tank. Tank: plastic with a capacity of 0.7 l. Nozzle diameter: 3 mm. Maximum pressure: 10 bar. Operating pressure: 2 to 6 bar. Operating temperature: from +5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRust and solid contaminant removal gun for hard-to-reach areas using mineral abrasive material. Grain diameter 0.1 ÷ 0.8 mm depending on the material being blasted. Version with a plastic tank with a capacity of 0.7 l. Nozzle diameter: 4 mm. Maximum pressure: 8 bar. Operating pressure: 4 ÷ 7 bar. Operating temperature: from 0°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction gun for removing dust and small contaminants. Includes a 250 mm suction nozzle, a 500 mm hose, and a reusable bag. Material: aluminum. Working pressure: 8 bar. Operating pressure: 4 ÷ 8 bar. Flow rate: 500 Nl/min (at 6 bar). Operating temperature: -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEasy-to-use air-powered gun made of durable and corrosion-resistant acetal designed for suctioning, e.g., engine oil, hydraulic oil, coolant, etc. Standardly equipped with a transparent tank with a capacity of 1.2 l and 2.0 l, facilitating the monitoring of the suctioned oil or other fluids, and a suction hose 1.5 meters long ending with a rigid tube with an outer diameter of Ø 10 mm (tube length 26 cm). Continuous operation is possible thanks to the lever lock. For engine oil, suction is recommended with a warm engine – min. oil temperature 50°C. Important! Not to be used for explosive fluids, e.g., gasoline. Material: gun, handle, cover, valve – acetal (POM); tank – polyethylene (PE); sealing – NBR; suction hose – PVC; tube – polyamide (PA11). Operating pressure: 6 ÷ 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle Ø 0.7 mm for spraying with a swirling insert intended for low-viscosity liquids. Cone spraying - approx. 40°. The stated flow rate refers to a pressure of 6 bar with the valve fully open. Material: brass. Maximum working pressure: 10 bar. Recommended pressure: 1 - 6 bar. Operating temperature: from +5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality pneumatic wrench designed for the assembly and disassembly of vehicle wheels - for service stations, tire shops, automotive workshops. Also used as an assembly tool in steel constructions, machinery, etc. Complies with the requirements outlined in the Machinery Directive 2006/42/EC. The set of socket wrenches in sizes 17, 19, and 21 mm should be treated as a separate assortment. Key features: dual impact mechanism TWIN HAMMER, housing made of composite materials, handle covered with anti-vibration material, low noise level - 83dB(A), three-position torque regulator. Includes EUROSTANDARD DN 7.2 quick coupling plug. Average air consumption: 113 l/min. Working pressure: 6.2 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpray gun for underbody washing, equipped with a metal tank with a capacity of 0.7 l. Tank: metal with a capacity of 0.7 l. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from +5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUnderbody washing spray gun, equipped with a plastic tank with a capacity of 0.7 l. Tank: plastic with a capacity of 0.7 l. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from +5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRust and solid contaminant removal gun for hard-to-reach areas using mineral abrasive material. Grain diameter 0.1 ÷ 0.8 mm depending on the material being blasted. Version with a 1.5 m suction hose. Nozzle diameter: 4 mm. Maximum pressure: 8 bar. Operating pressure: 4 ÷ 7 bar. Operating temperature: from 0°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpray gun for low-viscosity liquids and non-explosive fluids. Standardly equipped with a nozzle featuring a swirling insert. Conical spray pattern - approx. 40°. Flow regulation by lever pressure. Material: forged aluminum. Nozzle diameter: 0.7 mm. Operating pressure: 1 to 6 bar. Maximum pressure: 10 bar. Nominal flow rate with fully open valve: 0.33 l/min (6 bar). Operating temperature: from +5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum gun with a fixed nozzle Ø 3 mm, with flow rate adjustment. Utilizes vacuum to draw low-viscosity fluid from the tank. Tank: plastic with a capacity of 0.7 l. Nozzle diameter: 3 mm. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 6 bar. Operating temperature: from +5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of nozzles (suction attachments) for a suction gun (long and wide crevice). Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of high-strength 1/2" socket wrenches in sizes 17, 19, and 21 mm, coated with plastic. Available in various colors for easy size identification. Entirely enclosed in a convenient plastic case. Compatible with pneumatic wrench EW-741160.
