Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK E connector plug with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Both versions meet all required parameters and come from reputable suppliers. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality connector with quick-connect plugs for water NiTO 1/2" (in double or triple version). Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK F connector plug with external BSPT or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4194 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: BSP female thread. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK DU connector socket with internal BSP thread (flat polyurethane gasket) manufactured according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum. Levers: AISI 304 steel (in sizes 1.1/4" to 4" - levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 8537/20033 nut with Rd thread intended for a tapered end with a "tail" for a hose. Material: galvanized cast iron. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for the safe and vibration-damping installation of pipes, hoses, hose bundles, corrugated electrical installation pipes (hose covers), etc., where there is a risk of abrasion and damage. This type of clamp has a wide range of applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of AISI 304 stainless steel (W4), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The W4 version is recommended for marine industry applications. The clamp does not include a screw, washer, or nut. Material: AISI 304 steel (strip), EPDM rubber (flange). Strip width: 15 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect plug for water NiTO CLICK 3/4" with internal thread. NiTO CLICK quick-connects are water quick-connects made according to the profile of very popular plastic garden quick-connects and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick-connects and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDIN 20037 adapter with external BSP and Rd thread, for use in pneumatic installations. Material: steel/zinc-coated cast iron. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality reducing adapter for NiTO quick couplings for water with internal and external threads. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for safe and vibration-damping installation of pipes, hoses, hose bundles, corrugated electrical installation pipes (hose sheaths), etc., for which there is a risk of abrasion and damage. This type of clamp has wide applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber collar. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of galvanized carbon steel (W1), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The clamp does not include a screw, washer, or nut. Material: galvanized carbon steel (strip), EPDM rubber (collar). Strip width: 12 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK F connector plug with external BSPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket for water NiTO CLICK 3/4" with hose end. NiTO CLICK quick couplings are water couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for safe and vibration-damping installation of pipes, hoses, hose bundles, corrugated electrical installation tubes (hose covers), etc., for which there is a risk of abrasion and damage. This type of clamp has wide applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of galvanized carbon steel (W1), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The clamp does not include a screw, washer, or nut. Material: galvanized carbon steel (strip), EPDM rubber (flange). Strip width: 15 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for CAMLOCK DC coupling made according to the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the size of the coupling. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ adaptor with internal BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, allowing for easy connection. Elements with the same hook spacing can be connected. Material: brass. Working pressure: 16 bar. Seal: black NBR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRing for CAMLOCK coupling, type R. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring sealing quick coupling NiTO. Material: EPDM. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for the safe and vibration-damping installation of pipes, hoses, hose bundles, corrugated electrical installation tubes (hose sheaths), etc., for which there is a risk of abrasion and damage. This type of clamp has wide applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of AISI 304 stainless steel (W4), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The W4 version is recommended for marine industry applications. The clamp does not include a screw, washer, or nut. Material: AISI 304 steel (strip), EPDM rubber (flange). Strip width: 20 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ coupling with hose end designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed diameter of flow. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same spacing of hooks can be connected. Available in forged version with a working pressure of up to 16 bar and in cast version, characterized by significantly lower strength with a working pressure of up to 6 bar. Material: aluminum. Working pressure: 16 bar (forged couplings), 6 bar (cast couplings). Seal: white NBR rubber (forged couplings), black NBR rubber (cast couplings).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for the safe and vibration-damping installation of pipes, hoses, hose bundles, corrugated electrical installation tubes (hose sheaths), etc., for which there is a risk of abrasion and damage. This type of clamp has wide applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of AISI 304 stainless steel (W4), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The W4 version is recommended for marine industry applications. The clamp does not include a screw, washer, or nut. Material: AISI 304 steel (strip), EPDM rubber (flange). Strip width: 12 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug for water NiTO CLICK 3/4" with external thread. NiTO CLICK quick couplings are water couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved with an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK E connector plug with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connector, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: glass fiber reinforced polypropylene.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ adaptor with internal BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, allowing for easy connection. Elements with the same hook spacing can be connected. Available in a forged version with a working pressure of up to 16 bar and in a cast version, characterized by significantly lower strength with a working pressure of up to 6 bar. Material: aluminum. Working pressure: 16 bar (forged connections), 6 bar (cast connections). Seal: white NBR rubber (forged connections), black NBR rubber (cast connections).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for safe and vibration-damping mounting of pipes, hoses, hose bundles, corrugated electrical installation pipes (hose sheaths), etc., for which there is a risk of abrasion and damage. This type of clamp has wide applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of galvanized carbon steel (W1), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The clamp does not include a screw, washer, or nut. Material: galvanized carbon steel (strip), EPDM rubber (flange). Strip width: 20 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction coupling STORZ intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connecting part, allowing for easy connection. Elements with the same coupling spacing can be connected. Available in forged version with a working pressure of up to 16 bar and in cast version, characterized by significantly lower strength with a working pressure of up to 6 bar. Material: aluminum. Working pressure: 16 bar (forged couplings), 6 bar (cast couplings). Seal: white NBR rubber (forged couplings), black NBR rubber (cast couplings).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug for water NiTO CLICK 1/2" with a dual hose coupling, allowing the installation of hoses with two diameters. NiTO CLICK quick couplings are water couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK A connector plug with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 7 bar, depending on the size of the connector. Material: polypropylene reinforced with fiberglass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard gasket for the female part (socket) of the CAMLOCK coupling. Material: black neoprene (also available in white - index suffix "-NF"). Operating temperature: from -50°C to +107°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ cap, equipped with a chain to prevent loss, intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. With a symmetrical design of the connection part, it easily connects with each other. Elements with the same hook spacing can be connected. Available in a forged version with a working pressure of up to 16 bar and in a cast version, characterized by significantly lower strength with a working pressure of up to 6 bar. Material: aluminum. Working pressure: 16 bar (forged connections), 6 bar (cast connections). Seal: white NBR rubber (forged connections), black NBR rubber (cast connections).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSafety clamp for STORZ connection to prevent disconnection. It consists of a bent galvanized steel band and a rubber collar. The clamp must be selected for the specific DN size of the connection. Band material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK ER connector plug (reduction) with a ribbed end for hose made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPin for CAMLOCK connection, type P. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection set (EN 1092), type SZ1. Included: DIN931 bolts - 4 pieces, DIN934 nuts - 4 pieces, and DIN125A washers - 4 pieces. Mechanical property class: 5.6 - bolts; 8 - nuts; 140HV - washers. Selection of bolts and nuts for flanges according to the table in the appendix. Material: carbon steel, electro-galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ adaptor with internal BSP thread intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Characterized by a large, unobstructed flow diameter. With a symmetrical design of the connection part, it easily connects with each other. Elements with the same hook spacing can be connected. Material: stainless steel. Working pressure: 16 bar. Seal: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket IBC for flange PN made according to standard PN-EN 1514-1. The permissible working pressure at which a given gasket can be used depends on the temperature and type of medium (selection should be agreed with TUBES INTERNATIONAL®). When selecting a gasket, attention should be paid to the outer diameter dimension, appropriate for the flange class. For example: gasket DN 10 PN40 is suitable for classes PN10, PN16, and PN25. Material: EPDM. Working pressure: up to 60 bar. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd cap for CAMLOCK DP coupling made according to American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 7 bar, depending on coupling size. Material: polypropylene reinforced with fiberglass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTORZ blind cap, equipped with a chain to prevent loss, intended for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. With a symmetrical design of the connection part, it easily connects with each other. Elements with the same coupling spacing can be connected. Material: stainless steel. Working pressure: 16 bar. Seal: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK AR (reduction) connector plug with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlange connection set (EN 1092), type SZ1. Included: DIN931 screws - 4 pieces, DIN934 nuts - 4 pieces, and DIN125A washers - 4 pieces. Mechanical property class: A2-70 - screws; A2-70 - nuts. Selection of screws and nuts for flanges according to the table in the appendix. Material: AISI 304 steel.
