Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal butterfly valve, wafer type, centric, designed for industrial installations. Used for cold or hot water, drinking water, seawater and demineralized water, alcohols, sodium hydroxide, and other media, considering the chemical resistance of the valve material and sealing. Can be manually opened and closed or operated by a pneumatic actuator. The handle positions the valve in 9 positions: "open," "closed," and intermediate positions. For sizes from DN250, a lever with stepless adjustment is available. Supplied with a lever for size DN300. Complies with the PED Directive 2014/68/EU, has PZH certification and certificates from Bureau Veritas, Det Norske Veritas, and American Bureau of Shipping. Body material: ductile iron EN-GJS-500-7, coated with epoxy 250 ÷ 300 µm. Disc material: stainless steel CF8M. Stem material: stainless steel AISI 304. Lever material: aluminum. Disc and stem sealing: EPDM. Connection: flange PN10/PN16 for DN32 ÷ DN400, ASA150 for DN40 ÷ DN400. Operating temperature: from -20°C to +110°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal check valve designed for industrial installations, can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material. The valve must be installed according to the flow direction indicated on the body, in a horizontal position. Maximum constant working pressure across the full temperature range. Body material: brass (up to 4"), bronze (5" and 6"). Disc: brass. Connection: BSP female thread. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilter intended for check valves type 2280 and 2281. Material: AISI 304 steel. Connection: GZ BSP. Filter hole diameter: 1.0 mm. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket for water NiTO CLICK 3/4" with internal thread. NiTO CLICK quick couplings are water couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDCL clamp made from a single strip of tape with a snap closure that prevents accidental disconnection. The clamping force is evenly distributed across the clamp, and the smooth inner surface of the tape protects the hose from damage. Easy and quick assembly and disassembly using designated tools. Made of AISI 304 (W4) stainless steel, suitable for use in the food, household appliance, and automotive industries. The colored strap on the clamp facilitates identification. Note: the snap clamp does not have clamping adjustment; the diameter after installation must be precisely matched to the hose. Material: AISI 304 steel. Identification strap available in colors (information provided in the note): blue, green, purple, black, red.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK A connector with internal BSP thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Both versions meet all required parameters and come from reputable suppliers. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Standard system tape fasteners. Fasteners with so-called "ears" secure the end of the tape after bending. Material: AISI 316 stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 7164 with full bore, intended for gas installations, in pressure class MOP 5-20. Complies with the requirements of the PED directive 2014/68/EU and 2009/142/EC, in accordance with standard EN 331 + A1. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: BSP thread. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket for water NiTO CLICK 1/2" with external thread. NiTO CLICK quick couplings are water couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK C connector socket with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting tape for information plates of the Band-It® Tie-Lok® system, made of AISI 304 steel. Durable, secure, with a low-profile lock and smooth inner surface. Tape width: 1/4". Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mushroom valve type 2028 with metal-metal sealing and rising stem, intended for industrial installations. Allows for regulation or throttling at low flow rates. Maximum constant working pressure across the full temperature range. Body material: stainless steel CF8M. Disc material: stainless steel CF8M. Handle material: aluminum. Stem sealing: PTFE. Connection: BSP female thread. Operating temperature: from -20°C to +200°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal stop valve (valve installed at the end of the suction pipeline) intended for industrial installations. It can be used for water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material. The valve must be installed according to the flow direction indicated on the body, in a vertical position. Maximum constant working pressure across the full temperature range. Minimum opening pressure is directly proportional to the height of the water column above the valve, e.g., for 10 m, the opening pressure is 1.0 bar, for 5 m, the opening pressure is 0.5 bar. Body material: brass. Disc: brass. Disc sealing: NBR. Connection: BSP female thread. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsOne-piece gravity connector OLS, angle 22.5°, CAMLOCK A. Designed for gravity unloading of tankers (operating pressure should not exceed 1 bar). For medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Sealing: NBR. Operating pressure: 6 bar. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMounting tape for information plates of the Band-It® Tie-Lok® system, made of AISI 304 steel. Durable, safe, with a low-profile lock and a smooth inner surface. Tape width: 1/4". Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoated gasket for the female part (socket) of the CAMLOCK coupling. Material: FEP/silicone. Operating temperature: from -60°C to +205°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water plug NiTO 1" with hose end. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4331 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: carbon steel. Ball sealing: PTFE. Stem sealing: NBR. Connection: BSP female/BSP male. Operating temperature: from -20°C to +110°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe needle control valve with BSP internal thread is used to regulate the amount of fluid flowing through the system by changing the cross-section of the flow opening, up to its complete closure. They are intended for air installations, and can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). Needle valves have a brass cone (needle) whose displacement allows for smooth regulation from the fully open position to closed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Needle material: brass. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVapor recovery connection DVR with probe without valve (CAMLOCK D with BSP thread). For medium: gasoline, diesel, ULSD, crude oil, E20 (20% ethanol and 80% gasoline), E100 (100% ethanol), B20 (20% biodiesel and 80% diesel), B100 (100% biodiesel). Material: aluminum. Sealing: NBR. Working pressure: 6 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK CR (reductive) connector socket with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar. Material: aluminum. Levers: brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with "tail" for hose, intended for cold and hot water. Material: brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand-It® Ultra-Lok® system tape fasteners. Material: AISI 201 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 7100 intended for gas installations, in pressure class MOP 5-20. Complies with the requirements of the PED Directive 2014/68/EU and 2009/142/EC, in accordance with standard EN331 + A1. Maximum constant working pressure across the full temperature range. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: BSP thread. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe needle control valve with BSP external thread is used to regulate the flow of the medium in the installation by changing the cross-section of the flow opening, up to its complete closure. They are intended for air installations, and can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). Needle valves have a brass cone (needle), whose displacement allows for smooth regulation from the fully open position to closed. The direction of flow is indicated by an arrow on the valve body. Maximum constant working pressure across the full temperature range. Body material: brass. Needle material: brass. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose end with external thread in 1/2", 3/4" or 1" system. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIdentification label for the Band-It® Tie-Lok® identification system for self-labeling hoses available in three dimensions: 51x19, 63.5x38, and 89x19. Material: AISI 304 stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK AU connector plug with internal BSP thread (flat polyurethane gasket) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal ball valve type 4350 intended for industrial installations. It can be used for air, gases, water, chemicals, petrochemical products, etc., considering the chemical resistance of the valve material and sealing. It meets the requirements of the PED Directive 2014/68/EU. The working pressure depends on the operating temperature. Body material: nickel-plated brass. Ball material: chrome-plated brass. Lever material: aluminum. Ball sealing: PTFE. Stem sealing: FKM + NBR. Connection: BSP/G BSPT. Operating temperature: from -20°C to +150°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe inline shut-off valve with BSP internal thread is used to stop the flow of the medium in the installation. It is intended for air installations, and it can also be used with non-flammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon, etc.). The closure of the shut-off valve is achieved by manually turning the knob, which moves the ball until it is completely sealed. The direction of flow is indicated by an arrow on the valve body. Maximum working pressure is constant across the full temperature range. Body material: brass. Ball material: stainless steel AISI 304. Stem sealing: NBR. Working pressure: from 25 bar to 40 bar, depending on the internal diameter DN. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK D connector socket with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-coated self-locking strap designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect plug (adapter) for water NiTO CLICK 1/2" with NiTO system socket 1/2". NiTO CLICK quick-connects are water quick-connects made according to the profile of very popular plastic garden quick-connects and are compatible with them. Sealing is achieved using an o-ring placed externally on the plug. Manufactured in Denmark – 5-year warranty. They maintain the simplicity of commonly known plastic quick-connects and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBilateral seal for quick coupling socket made of EPDM. Resistant to hot water. Operating temperature: up to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK B connector socket with external BSPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: brass. Levers: AISI 304 steel. Sealing: NBR.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDouble ball valve (distributor) for compressed air and water. Body material: galvanized carbon steel. Ball material: chrome-plated brass. Ball sealing: PTFE. Inlet with internal thread, outlet with external thread or with cast iron quick-connect fittings with a pin spacing of 42 mm, with rubber sealing (NBR) or brass. Lever with end stop. Equipped with venting. Working pressure: 10 bar. Operating temperature: from -20°C to +100°C. Robust, maintenance-free design. Used in compressors and construction and industrial equipment.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-coated self-locking strap designed for easy and simple manual installation or using a tensioning and cutting tool (index: BD-KE9229). It has high resistance to fire, corrosion, UV radiation, and high and low temperatures. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless steel hygienic valve with TRICLOVER connections, intended for the food, pharmaceutical, cosmetic, biotechnology, and chemical industries, manufactured according to the sanitary standard 3-A (63-03 and 78-01). Internal surface roughness Ra < 0.8 µm. The seal has PZH certification. Note: sizes from DN10 to DN20 are equipped with a plastic lever. Body material: AISI 304 steel. Seal: VMQ (silicone). Operating temperature: from -20°C to +100°C (short steam sterilization up to +120°C; cleaning with weak acid and base solutions up to +70°C). Tightness class: A according to DIN EN 12266-1. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConical end with "tail" for pneumatic hoses, without a protective flange. Material: galvanized cast iron. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug for water NiTO CLICK 1/2" with hose end. NiTO CLICK quick couplings are water couplings made according to the profile of very popular plastic garden quick couplings and are compatible with them. Sealing is achieved using an O-ring placed externally on the plug. Manufactured in Denmark – 5 years warranty. They maintain the simplicity of commonly known plastic quick couplings and are characterized by strength and durability. Designed for water, water with cleaning agents for use in industry, services, horticulture, agriculture, etc. Material: chrome-plated brass (matte - satin). Working pressure: up to 25 bar. Operating temperature: from -30°C to +80°C. Sealing: NBR (not suitable for gasoline and oils).
