DPC heavy-duty twin-screw clamp, carbon steel

, /
DPC heavy-duty twin-screw clamp, carbon steel

Strong two-bolt clamp with double band and joint closure for heavy loads. Two screws and full pins ensure a precise and tight connection between the hose and the fitting. Recommended for connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band with a width of 20 mm and 24 mm. The rolled edges of the bridges prevent damage to the hose surface. The clamp features markings on the band for minimum and maximum diameter as well as material. Tightening of screws is done using an Allen key. All components are made of galvanized steel.

List of product variants

Article numberProduct variant nameNominal inner diameterWorking pressure [bar]Enquiry
AB-DPC-035-045-W1DPC clamp 35÷45 mm, width 20 mm, W1--
AB-DPC-040-050-W1DPC clamp 40÷50 mm, width 20 mm, W1--
AB-DPC-045-055-W1DPC clamp 45÷55 mm, width 20 mm, W1--
AB-DPC-050-060-W1DPC clamp 50÷60 mm, width 20 mm, W1--
AB-DPC-055-065-W1DPC clamp 55÷65 mm, width 20 mm, W1--
AB-DPC-060-070-W1DPC clamp 60÷70 mm, width 20 mm, W1--
AB-DPC-065-075-W1DPC clamp 65÷75 mm, width 20 mm, W1--
AB-DPC-070-080-W1DPC clamp 70÷80 mm, width 20 mm, W1--
AB-DPC-075-085-W1DPC clamp 75÷85 mm, width 20 mm, W1--
AB-DPC-080-090-W1DPC clamp 80÷90 mm, width 20 mm, W1--
AB-DPC-085-095-W1DPC clamp 85÷95 mm, width 20 mm, W1--
AB-DPC-090-100-W1DPC clamp 90÷100 mm, width 24 mm, W1--
AB-DPC-095-105-W1DPC clamp 95÷105 mm, width 24 mm, W1--
AB-DPC-100-110-W1DPC clamp 100÷110 mm, width 24 mm, W1--
AB-DPC-105-115-W1DPC clamp 105÷115 mm, width 24 mm, W1--
AB-DPC-110-120-W1DPC clamp 110÷120 mm, width 24 mm, W1--
AB-DPC-115-125-W1DPC clamp 115÷125 mm, width 24 mm, W1--
AB-DPC-120-130-W1DPC clamp 120÷130 mm, width 24 mm, W1--
AB-DPC-125-135-W1DPC clamp 125÷135 mm, width 24 mm, W1--
AB-DPC-130-140-W1DPC clamp 130÷140 mm, width 24 mm, W1--
AB-DPC-135-145-W1DPC clamp 135÷145 mm, width 24 mm, W1--
AB-DPC-140-150-W1DPC clamp 140÷150 mm, width 24 mm, W1--
AB-DPC-145-155-W1DPC clamp 145÷155 mm, width 24 mm, W1--
AB-DPC-150-160-W1DPC clamp 150÷160 mm, width 24 mm, W1--
AB-DPC-155-165-W1DPC clamp 155÷165 mm, width 24 mm, W1--
AB-DPC-160-170-W1DPC clamp 160÷170 mm, width 24 mm, W1--
AB-DPC-165-175-W1DPC clamp 165÷175 mm, width 24 mm, W1--
AB-DPC-170-180-W1DPC clamp 170÷180 mm, width 24 mm, W1--
AB-DPC-180-190-W1DPC clamp 180÷190 mm, width 24 mm, W1--
AB-DPC-190-200-W1DPC clamp 190÷200 mm, width 24 mm, W1--
AB-DPC-200-210-W1DPC clamp 200÷210 mm, width 24 mm, W1--
AB-DPC-210-220-W1DPC clamp 210÷220 mm, width 24 mm, W1--
AB-DPC-220-230-W1DPC clamp 220÷230 mm, width 24 mm, W1--
AB-DPC-230-240-W1DPC clamp 230÷240 mm, width 24 mm, W1--
AB-DPC-240-250-W1DPC clamp 240÷250 mm, width 24 mm, W1--
AB-DPC-250-260-W1DPC clamp 250÷260 mm, width 24 mm, W1--
AB-DPC-260-270-W1DPC clamp 260÷270 mm, width 24 mm, W1--
AB-DPC-270-280-W1DPC clamp 270÷280 mm, width 24 mm, W1--
AB-DPC-280-290-W1DPC clamp 280÷290 mm, width 24 mm, W1--
AB-DPC-290-300-W1Clamp DPC 290÷300 mm, width 24 mm, W1--
DPC heavy-duty twin-screw clamp, carbon steel

Strong two-bolt clamp with double band and joint closure for heavy loads. Two screws and full pins ensure a precise and tight connection between the hose and the fitting. Recommended for connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band with a width of 20 mm and 24 mm. The rolled edges of the bridges prevent damage to the hose surface. The clamp features markings on the band for minimum and maximum diameter as well as material. Tightening of screws is done using an Allen key. All components are made of galvanized steel.

Additional information

Material

CS – steel (cast iron)

Additional information

Material

CS – steel (cast iron)

Catalogue
Download

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY