Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPROTECTOR spiral cover designed to protect hoses (hoses) from abrasion, impacts, and crushing. It also serves to maintain a group of hoses (hoses) in a bundled form. Improves visibility of the covered hoses. Resistant to acids, oils, solvents, and UV radiation. For outer diameters from 75 mm to 140 mm, sections have an opening to facilitate connection into longer lengths (does not apply to coils). Easy to install both before and after hose installation. Available in black, yellow, and red. Material: polyethylene (HDPE). Operating temperature: from -50°C to +100°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal protection for hoses, hoses, and ropes in the form of a sleeve. Resistant to flame, abrasion, oils, and most industrial chemicals. Used in steelworks, metal and glass foundries, and casting - splashes of molten metal and glass do not adhere to the cover. Also used for protecting steam and hot oil installations - protects against burns and energy loss. Very good moisture resistance makes it suitable for outdoor use as well. Available in other colors upon request. A VCO version with flame-retardant Velcro is available upon inquiry, with diameters ranging from 22 mm to 140 mm, in lengths up to 30 meters. The Velcro mounting allows for easy installation without disconnecting wires, hoses, or pipes. Material: fiberglass coated with silicone in a rusty color. Operating temperature: from -54°C to +260°C (up to +1093°C for 15 to 20 minutes), (up to +1650°C for 15 to 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal insulation made from specially cleaned fiberglass braid through heating and saturation with a special acrylic substance. It does not have loose, falling fibers, lays well, and is relatively abrasion-resistant. It can be expanded and contracted by 25% to fit the desired diameter. Material: fiberglass. Operating temperature: up to +538°C (temporarily up to +705°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMINE SPIRAL+ is an antistatic version of the PROTECTOR cover with added components that reduce flammability and ignition potential, especially in mining applications and machinery used in mines. It has MSHA IC-271 approval issued by the Mine Safety and Health Administration as a flame-resistant product, permitted for use in mines. Flammability class according to UL 94 V-0 (flammability safety standard for plastic materials). Material: brown-gray polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal protection in the form of a sleeve. Strong, chemically resistant (except for hydrofluoric acid, phosphoric acid, and strong bases). Completely flame resistant. High content of pure silica (over 96%) ensures excellent temperature resistance, flexibility, and minimal shrinkage. It has electroinsulating properties. Does not emit smoke or fumes. Wall thickness is approximately 1.65 mm. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose used as a protective cover for cooling electrical hoses in the metallurgical industry. Inner layer resistant to hot cooling water, process water, corrosion inhibitors, and water with antifreeze fluids. Both inner and outer layers are non-conductive. Electrical resistance R > 1010 Ω/m, breakdown resistance > 6 kV/mm. Outer layer resistant to aging, ozone, and radiant heat from electric arc furnaces, self-extinguishing (compliant with ASTM C-542 standard). Bend radius specified for pressure of 1 bar. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black CR rubber. Working pressure: 10 bar. Burst pressure: 30 bar. Operating temperature: from -40°C to +90°C (temporarily +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-adhesive PYROTAPE is designed for wrapping finished hoses and installations without disconnecting them, as a substitute for PYROJACKET, as well as for sealing the ends of hoses and irregularly shaped objects. Resistant to splashes of liquid metal (does not adhere to the cover), flame, moisture, and abrasion. The nominal thickness of the tape is 3.73 mm. During installation, a 30-50% overlap is recommended, along with the use of PYROSIL tape or stainless steel clamps. The tape should not be used for dynamically bent hoses. Material: fiberglass coated with silicone in a rusty color. Operating temperature: from -54°C to +260°C (up to +1093°C for 15 to 20 minutes), (up to +1650°C for 15 to 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral shield made of steel wire designed to protect hoses (hoses) from abrasion, bending, and crushing. Standard length 5 m. Material: galvanized spring steel. Spacing between coils: 5 mm (for wire thickness 1.6 mm), 6 mm (for wire thickness 2 mm), 10 mm (for wire thickness 3 mm).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral protection designed to safeguard hoses (hoses) against abrasion and crushing. It also serves to maintain a group of hoses (hoses) in the form of a bundle. Resistant to weather conditions, UV radiation, ozone, fire (according to UL94VO), oil, diesel fuel, and water. SPIRALINA FLEX has a thinner wall and is more flexible compared to the standard SPIRALINA protection. Non-conductive - surface conductivity 1010 Ω. Material: rigid PVC (has shape memory). Standard length: 20 m. Operating temperature: from -10°C to +60°C (temporarily up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal reflective shield made of PYREFLECT BLANKET fabric, double-stitched to the required diameter. Reflects over 90% of radiant heat energy. Used in cases where radiant heat (infrared radiation) must be contained and reflected. Resistant to abrasion, water, and oil. Good flame resistance. Available upon request in VCO version with Velcro in diameters ranging from 19 mm to 305 mm. Velcro mounting allows the shield to be easily installed without disconnecting wires, hoses, or pipes. Material: aramid fabric, aluminum foil. Operating temperature: up to +343°C (temporarily up to +538°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible steel braid, used to protect hoses from mechanical damage, abrasion, and temperature. It also increases their strength under elevated pressure. It can be clamped with a hose clamp or sleeves. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSelf-vulcanizing silicone tape PYROSIL used for sealing the PYROJACKET cover and PYROTAPE. It does not have an adhesive layer, but when overlapping itself or on PYROJACKET or PYROTAPE, it vulcanizes in a few seconds. Resistant to radiant heat, moisture, and vibrations. Due to its very good dielectric strength, it is suitable as an electrical insulator. A 50% overlap and a clean, dry surface are recommended during installation. Not recommended for contact with flames and splashes of molten metal. Material: silicone in rust color. Operating temperature: up to +246°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFE SLEEVE cover made of dense fabric designed to protect hoses or bundles of hydraulic and pneumatic lines. Excellent abrasion resistance (tested according to SFS-EN ISO 12947-3), chemically resistant and UV resistant, low electrical conductivity. The cover protects people nearby from a bursting hose. Complies with EN ISO 3457 and EN 12999 standards. The attribute tape width specifies the width of the cover in a flat state. Material: black polypropylene (without printing). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong glass fabric coated on both sides with rust-colored silicone, with a weight of 1085 g/m². Primarily used as a welding shield, as well as in outdoor applications and in the offshore industry, due to its resistance to moisture and sunlight. Material: glass fabric coated with silicone. Operating temperature: from -54°C to +260°C (temporarily up to +1185°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsASTA version of the PROTECTOR cover is fully antistatic, designed for underground work and other special environments that require a conductive surface. Compliant with standard EN ISO 80079-36:2016, which is related to the ATEX directive for non-electrical equipment in explosive atmospheres. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpecial version of the PYROJACKET shield designed primarily for aviation (manufactured according to SAE Aerospace Standard 1072E), railway industry (compliant with DIN EN 45545-2:2013-08), and marine applications. Additionally, it is certified in diameters from 13 mm to 127 mm by DNV for temperatures up to +800°C for 30 minutes (ISO 15540) and by MSHA (for use in mines). A VCO version with flame-retardant Velcro is available upon request, in diameters ranging from 22 mm to 140 mm, with lengths up to 30 meters. The Velcro mounting allows the shield to be easily installed without disconnecting wires, hoses, or pipes. Material: fiberglass coated with silicone in a rusty color. Operating temperature: from -54°C to +260°C (up to +1093°C for 15 to 20 minutes), (up to +1650°C for 15 to 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong cover equipped with Velcro® fastening - "hook and loop" along the entire section, easy to install on wire harnesses and to dismantle. The fabric used for SAFE WRAP is characterized by excellent tensile strength (EN ISO 13934-1) and is 100% waterproof (EN 24920). SAFE WRAP also meets the requirements of standard ISO 3457 (conducted porosity test). It has high abrasion resistance. Available in other inner diameters. Material: black polyamide fabric coated externally with black polyurethane. Operating temperature: from -20°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal reflective shield in the form of rolls or shorter sheets, with a grammage of 678 g/m², designed to reflect over 90% of radiant heat energy. Used in cases where radiated heat (infrared radiation) must be blocked and reflected. Resistant to abrasion, water, and oil. Good flame resistance. Shield available in roll widths of 1016 mm and 1525 mm. Material: aramid fabric, aluminum foil. Operating temperature: up to +343°C (temporarily up to +538°C).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsCrack and twist resistant, FEP heat shrinkable tubing for use in various industrial sectors. Long service life measured in years, even when operating under high pressures. Smooth surface prevents contamination adhesion. Excellent temperature resistance. Widely used in industry (e.g., as a cover for rollers in paper production and in printing). Material: fluorinated ethylene propylene (FEP). Maximum operating temperature: +204°C. Shrink temperature: from +121°C to +204°C (shrinkage in the range of 20 ÷ 25%). Hardness: 53° Shore (A). Density: 2.15 g/cm³.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral cover designed to protect hoses (hoses) from abrasion, impacts, and crushing. It also serves to maintain a group of hoses (hoses) in the form of a bundle. Improves visibility of the covered hoses. Resistant to acids, oils, solvents, and UV radiation. ABRA is a two-color version of the PROTECTOR cover with a so-called wear indicator. It is black on the outside and yellow on the inside. ABRA helps identify areas that require closer observation - as soon as the black layer wears away revealing the yellow color, it will signal that the spiral may soon need to be replaced. Available only in rolls. Material: polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal, thick fiberglass insulation. Excellent thermal and electrical insulation properties. As a protective cover for hoses and hoses, it can be used independently or, for example, under the PYROJACKET or SILICAFLEX cover to significantly enhance the insulation effect. Available in two wall thicknesses: 3.2 mm - TSB and 1.6 mm - TSBL. Material: fiberglass. Operating temperature: up to +538°C (temporarily up to +705°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal protection in the form of rolls or shorter sheets designed to protect hoses, hoses, and other components from metal splashes, intense radiant heat, flames, and welding spatter. High content of pure silica (over 96%) ensures excellent temperature resistance, flexibility, and minimal shrinkage. It does not emit smoke or fumes. Available in three versions, in rolls of 915 mm and 1525 mm width: SILICAFLEX BLANKET 18 – thickness 0.76 mm, SILICAFLEX BLANKET 32 – thickness 1.25 mm, SILICAFLEX BLANKET 36 – thickness 1.27 mm. There is also a special version of SILICAFLEX BLANKET coated with a reflective aluminum layer (FQSFB36-36AL). The aluminized SILICAFLEX BLANKET, in addition to the features of the standard SILICAFLEX cover and reflecting intensely radiating heat, also has better tear and abrasion resistance, as well as improved water and oil resistance. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThin-walled protective hose reinforced with vulcanized synthetic braid. Material of the outer layer: black SBR rubber. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGT35 cover made of very dense polyester fabric. Designed to protect individual hoses or bundles of hydraulic and pneumatic lines. It has good mechanical resistance as well as resistance to oils and organic products. Protects the hose and safeguards the operator from oil spray in case of hose rupture. Material: polyester. Operating temperature: +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal tape coated on one side with a bonding adhesive when stretched. Designed to protect hoses, hoses, and pipes from intense radiant heat and flames. The thickness of the tape is approximately 0.76 mm. A 50% overlap is recommended during installation. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSAFE SLEEVE MSHA cover made of dense fabric designed to protect hoses or bundles of hydraulic and pneumatic lines. Excellent abrasion resistance (tested according to SFS-EN ISO 12947-3), chemically and UV resistant, low electrical conductivity. The cover protects people nearby from a bursting hose. Complies with EN ISO 3457 and EN 12999 standards. The product is flame retardant and approved for use in mines. The attribute width of the tape specifies the width of the cover in a flat state. Material: black polyester (with print). Operating temperature: from -40°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible cover made from tape cut from PE pipe. Designed for protecting electrical hoses and hoses, as well as bundling them together. Resistant to acids, oils, solvents, and UV radiation. Material: black polyethylene (PE). Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum sleeve for mounting SAFE SLEEVE shields. Diameter D1 [mm] - outer diameter. Diameter D2 [mm] - inner diameter. Material: aluminum.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand made of dense fabric, designed for bundling wire harnesses. Versions: with Velcro® fastening - hook and loop (STRD), with Velcro® fastening - hook and loop with mounting eyelet (STRDR), and with stainless steel buckle (STFLL). The SAFE-STRIP label is embroidered. Material: black polypropylene. Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGLOW is a photoluminescent version of the PROTECTOR cover designed to protect hoses (hoses) or hose bundles from abrasion, impacts, and crushing. It ensures visibility of hoses even in low light conditions. It glows for over 12 hours and can be charged by any light source. It contains no harmful materials or halogens. UV resistant. Color: yellow with photoluminescent edges. Material: polyethylene (HDPE) + photoluminescent compound. Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe GPVC cover is designed to protect individual hoses or bundles of hydraulic and pneumatic lines. It protects the hose and safeguards the operator from oil spray in the event of a hose rupture. Material: PVC. Operating temperature: +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThick, heavy glass fabric coated on one side with a thick layer of silicone, with a weight of 3260 g/m². It has high insulation properties and excellent flame and abrasion resistance. Resistant to water, moisture, and hydraulic oils. Used in steelworks, metal and glass foundries - splashes of molten metal and glass do not adhere to the shield. Material: glass fabric coated with silicone. Operating temperature: from -54°C to +260°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery thick protective cover for hoses, hoses, and pipes in the form of a sleeve. Flame-resistant, abrasion-resistant, and oil-resistant. Also used for protecting steam and hot oil installations - protects against burns and energy loss. The application of this cover can reduce the external temperature of the steam hose from +194°C to +54°C. Nominal wall thickness: 5.08 mm. Very good moisture resistance makes it suitable for outdoor use as well. Material: fiberglass coated with blue silicone. Operating temperature: from -54°C to +260°C (up to +1093°C for 15 to 20 minutes; up to +1650°C for 15 to 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral guard made of steel tape designed to protect hoses (hoses) from abrasion, bending, and crushing. Spacing between coils: 3 mm. Material: galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsECO is an ecological version of the PROTECTOR cover designed to protect hoses (hoses) or hose bundles from abrasion, impacts, and crushing. Made entirely from recycled polyethylene. The ECO spiral cover is suitable for all companies looking to enhance sustainability and reduce their carbon footprint by choosing recycled materials. Color: black. Material: recycled polyethylene (HDPE). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermally resistant sealant in the form of a semi-liquid paste that cures to a non-sticky state within 10 to 15 minutes, and completely within 18 hours. Supplied in 310 ml tubes for a caulking gun. It should be used in well-ventilated areas and avoid contact with gasoline or diesel fuel. Material: a mixture of amorphous silica, polydimethylsiloxane (a type of silicone), iron oxide, and a catalyst. Operating temperature: from -59°C to +287°C (temporarily up to +538°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThin-walled insulating cover designed for cooling electrical hoses in automatic welding systems. Electrical resistance 1x108 Ω/m. Inner layer material: black SBR/NR rubber. Outer layer material: black SBR/NR rubber. Reinforcement: textile braid. Working pressure: 10 bar. Operating temperature: from -30°C to +80°C.
