Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / Detailscoupling for joining two garden hoses with installed quick coupling sockets. Material: PVC. Working pressure: up to 6 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal "premium" class gun for air, water, and non-explosive fluids, designed for more demanding users. Effectively cleans surfaces of contaminants with air and water. Ideal for cooling surfaces during metal processing. Features unmatched blowing power, with adjustable stream shape - from narrow to wide and adjustable intensity. The nozzle design ensures no medium leakage. Plastic nozzle edges prevent damage to the cleaned surface. Lightweight construction, non-slip grip, and ergonomic shape of the gun provide high work comfort. Impact and crack-resistant housing qualifies the device for use in harsh conditions. Material: polyoxymethylene (POM), thermoplastic elastomer (TPE), aluminum (Al). Sealing: NBR. Working pressure: 16 bar. Burst pressure: 64 bar. Operating temperature: from -20°C to +60°C (16 bar) / up to +80°C (10 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCircular cross-section gasket (o-ring) for general use (range 2.9x1.78 ÷ 17.3x2.4). Material: NBR, hardness 70 Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPractical magnetic holder for CEJN series 208 and 210 air guns, which facilitates the daily work of the operator. It features a strong magnet that allows attachment to a metal surface. The holder is easy to install on either the right or left side of the gun.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCircular cross-section gasket (o-ring) for general use (range 18x1.5 to 35x4). Material: NBR, hardness 70 Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfiled gasket according to DIN 3869 for high-pressure connections with metric and/or inch threads according to DIN 3852-11E. Material: Viton, hardness 80 according to Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtended bent nozzle with a hole diameter of 2.3 mm for air guns, finished with a metric thread M12x1.25. Material: nickel-plated steel. Maximum pressure: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for pipes and flanges (with PTFE). Characterized by high viscosity and medium strength. Has DVGW certification - approved for gas and hot water installations. Has KTW certification - approved for drinking water installations. Removable using standard tools. Maximum thread size: M 80. Operating temperature: -60°C to +150°C. Packaging type "pen" with a capacity of: 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gun for air, water, and non-explosive fluids. Designed primarily for blowing out contaminants, including in hard-to-reach places. Characterized by high blowing force. Lightweight construction, ergonomic shape of the gun, and low trigger pull force ensure great working comfort. The gun is standardly equipped with a socket with a 1/4" BSP or 1/4" NPT thread. This model is available in a version with a nozzle featuring a shut-off valve, interchangeable. Compliant with OSHA standard 1-13.1 (European Agency for Safety and Health at Work). A wide range of additional accessories allows for customization to specific application requirements. Material: POM (body), brass (valve). Sealing: NBR. Working pressure: 8 bar. Operating temperature: from -20°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFive-piece tool set for simple and effective removal of all types of seals (e.g., O-rings), oil seals, etc. The set includes: knurled handle, straight tip, 90° tip, 45° tip, and hook-type tip.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCircular cross-section gasket (o-ring) for general use (range 36x1.5 to 222x4). Material: NBR, hardness 70 Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Made by casting from aluminum. The gun is equipped with a SAFETYSTAR nozzle, interchangeable, with an external connection thread M12x1.25, bent with a length of 110 mm made of nickel-plated steel. It is ideal for blowing out hard-to-reach areas while improving working conditions by reducing noise levels to 80 dB. Instead of the SAFETYSTAR nozzle, other nozzles can be installed – see EWO gun accessories. Depending on the connection, we distinguish a gun finished with a EUROSTANDARD 7.2 plug, a hose end with a diameter of 6 mm, 9 mm, and 13 mm, or an internal thread of 1/4". Material: aluminum (casting). Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCircular cross-section gasket (o-ring) for general use. Material: Viton, hardness 80 Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible nozzle, coated with copper, with the ability to bend and adapt to specific tasks in hard-to-reach places; installation directly to the body of the gun. Nozzle length: 400 mm. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCircular cross-section gasket (o-ring) for general use (range 6.5x1 to 50.4x3.53). Material: NBR, hardness 90 Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCircular cross-section gasket (o-ring) for general use. Material: EPDM, hardness 70 Shore.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality aluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Made of forged aluminum, protected by anodizing, ensuring high strength, durability, and corrosion resistance. Can be used with water. Ideal for even the most challenging working conditions. The gun is equipped with a nozzle 120 mm in length, with an external connection thread M12x1.25. Other nozzles can be installed instead of the standard nozzle – see EWO gun accessories. Connection: EUROSTANDARD 7.2 plug. Material: aluminum (forging). Outer diameter of the nozzle (tube): 6 mm. Length of the nozzle: 120 mm. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality aluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by lever pressure. Made of forged aluminum, protected by anodizing, ensuring high strength, durability, and corrosion resistance. Ideal for use even in harsh working conditions. The gun is equipped with a SAFETYSTAR nozzle, interchangeable, with an external connection thread M12x1.25, bent with a length of 110 mm made of nickel-plated steel. Perfect for blowing out hard-to-reach areas while improving working conditions by reducing noise levels to 80 dB. Other nozzles can be installed instead of the SAFETYSTAR nozzle – see EWO gun accessories. Depending on the connection, we distinguish a gun finished with a EUROSTANDARD 7.2 plug, a hose end with diameters of 6 mm, 9 mm, and 13 mm, or an internal thread of 1/4". Material: aluminum (forging). Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details6-channel comb nozzle, flat flow, finished with external thread M12x1.25. Ideal for cleaning and cooling. With adapter. Material: blue polyamide (nozzle), aluminum (adapter). Maximum pressure: 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsGraphite grease for lubricating the head (jaws) of Finn-Power crimping presses, rich in anti-wear additives and additives that counteract grease degradation. Regular lubrication ensures reliable operation and clamping accuracy. Cartridge: 400 g.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBent nozzle with shut-off valve, for direct installation to the gun body. Reduces output pressure to a safe level in case of blockage at the outlet. Nozzle length: 90 mm. Working pressure: 8 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMagnetic grip with ergonomic handle allowing for simultaneous replacement of a complete set of working jaws in FINN-POWER P20 crimping presses. The pins in the magnetic grip for jaw replacement cooperate with the holes in the jaw segments. The jaw segments are held in the grip by a magnet. Material: plastic - handle, steel - other components.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBLOWSTAR nozzle with a double nipple for air guns, finished with a metric thread M12x1.25. It features a low noise level - only 74 dB at a pressure of 6 bar, without compromising the blowing force. It meets the following safety standards and directives: OSHA 1-13.1 (European Agency for Safety and Health at Work), 2003/10/EC, 2006/42/EC, EN 12100. Nominal flow: 295 l/min at a pressure of 6 bar. Material: zinc casting (nozzle), aluminum (nipple).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRubber nozzle tip with an outer diameter of 6 mm (compatible with nozzle under index EW-470K12), protecting delicate surfaces being cleaned from scratches. Material: TPU.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtended bent nozzle with a hole diameter of 3 mm for air guns, finished with a metric thread M12x1.25. Tube diameter: 5 mm. Available lengths: 110 mm, 160 mm, and 260 mm. Material: nickel-plated brass. Maximum pressure: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard bent nozzle, for direct installation to the gun body. Nozzle length: 90 mm. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHandy compressed air pen designed for quick removal of all contaminants from surfaces: liquids, fine chips, shavings, etc. Made of anodized aluminum. Equipped with a nozzle with one-handed flow adjustment capability - from a narrow to a wide air stream. The rubber tip at the end of the pen protects surfaces from scratching. Finished with a EUROSTANDARD 7.2 plug. Material: housing – aluminum protected by anodizing; sealing – NBR. Nozzle hole diameter: 0 ÷ 3 mm. Nominal flow: 300 l/min at 6 bar pressure. Maximum pressure: 12 bar. Operating pressure: 1 ÷ 6 bar. Operating temperature: from -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHandy straight nozzle for compressed air with a lever, designed for removing all types of contaminants from surfaces: liquids, fine chips, shavings, etc. The lever design reduces operator fatigue and discomfort, even during prolonged use. Equipped with a standard nozzle with a hole diameter of 2 mm. Depending on the connection, we distinguish between a nozzle ending with a hose fitting of 6 mm and 9 mm diameter or a EUROSTANDARD 7.2 plug. Material: aluminum. Nozzle hole diameter: 2 mm. Maximum pressure: 8 bar. Operating pressure: 1 ÷ 6 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard nozzle with a central hole (available hole diameters 1.5 mm and 2 mm), characterized by a concentrated air stream with high blowing force. Noise level 90 dB at pressure above 4 bar. Connection: GZ M12x1.25. Material: aluminum. Maximum pressure: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe jaw holder for the P20 press is supplied with a magnetic handle for quick exchange of working jaws. It can be mounted on the floor or to a workstation (table) for the press. It provides a safe and easy storage place for a complete set of jaws. Capacity: 12 holes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLow-pressure hose reel with manual drive, CU series, dedicated to less demanding applications for transporting air and water. It features a brake that prevents the hose from unwinding from the spool when not in use. It is characterized by a rigid base construction, with the reel mounted on both sides. Material: powder-coated carbon steel. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFonts for marking clamp sleeves for jaws P20 and P32. Standard font height: 2 mm. Available individually: 0 - 9, A - Z, "-" (hyphen), "." (dot), "/" (slash), "˽" (space).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFonts for marking clamp sleeves for jaws P20 and P32. Standard font height: 3 mm. Available individually: 0 - 9, A - Z, "-" (hyphen), "." (dot), "/" (slash), "˽" (space).
Select options This product has multiple variants. The options may be chosen on the product page / DetailsFFORX nozzle for cleaning pipes with flat seal couplings with sealing ring. Size: 6 mm (1/4").- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNozzle Ø 0.7 mm for spraying with a swirling insert intended for low-viscosity liquids. Cone spraying - approx. 40°. The stated flow rate refers to a pressure of 6 bar with the valve fully open. Material: brass. Maximum working pressure: 10 bar. Recommended pressure: 1 - 6 bar. Operating temperature: from +5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFULL-JET injector nozzle with a hole diameter of 2.5 mm and a wide air stream, draws air from the environment at an exceptionally high flow rate, doubling the air flow. Noise level: 90 dB. Material: aluminum. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFULL-JET injector nozzle with a hole diameter of 2 mm and a wide air stream, draws air from the environment at an exceptionally high flow rate, doubling the air flow. Noise level: 90 dB. Material: black plastic. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInjector nozzle; for direct installation on a tube; draws air from the environment at exceptionally high flow rates, doubling the airflow. Compliant with OSHA standard 1-13.1 (European Agency for Safety and Health at Work). Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAir screen nozzle protecting the operator from contamination particles during operations and dampening noise. Noise level 80 dB at a pressure of 6 bar. Nozzle hole diameter 1.5 mm. Material: aluminum. Maximum pressure: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNoise reduction nozzle with internal thread for CEJN gun; designed for operation in confined spaces; for direct installation on tubing. Sound intensity below 85 dB, in accordance with the European Machinery Directive art. 1.5.8. Compliant with OSHA standard 1-13.1. (European Agency for Safety and Health at Work). Working pressure: 16 bar.
