Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual, lightweight pipe bending device for diameters from 8 to 22 mm. The set includes bending rollers and a durable metal case. To increase bending precision, the rollers are equipped with angle value scales. Larger rollers are placed over smaller ones, making the set lighter. The device is designed for mounting in a vise. Weight: 14 kg.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug for cleaning hoses and pipes intended for ULTRACLEAN devices. Removes fine particles of bulk contaminants from the inner surfaces of hoses and pipes. Cleaning involves shooting the plug using compressed air. Available in diameter ranges of 2 ÷ 95 mm. Possibility of sale in bulk packaging (the number of pieces in bulk packaging depends on the outer diameter of the plug).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMini lubricator designed for direct connection to pneumatic tools, such as pneumatic wrenches, grinders, etc., for lubricating tools with an oil mist. Due to the short distance from the lubricator to the tool, a constant supply of oil is ensured. The fill level is always visible. This solution protects internal components from corrosion and reduces wear on cooperating elements. The oil mist is created by the flowing air stream. The oil dosing is factory-set and amounts to approximately 50 mm³ per 1m³ of flow. One dose lasts for about 10 hours at a flow rate of 109 l/min. Oil (index: EW-583) must be ordered separately. Maximum working pressure: 8 bar (recommended 6.2 bar). Operating temperature: from -5°C to +60°C. Material: NBR (sealing), aluminum (housing), acetal (tank).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPROTECTOR spiral cover designed to protect hoses (hoses) from abrasion, impacts, and crushing. It also serves to maintain a group of hoses (hoses) in a bundled form. Improves visibility of the covered hoses. Resistant to acids, oils, solvents, and UV radiation. For outer diameters from 75 mm to 140 mm, sections have an opening to facilitate connection into longer lengths (does not apply to coils). Easy to install both before and after hose installation. Available in black, yellow, and red. Material: polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal protection for hoses, hoses, and ropes in the form of a sleeve. Resistant to flame, abrasion, oils, and most industrial chemicals. Used in steelworks, metal and glass foundries, and casting - splashes of molten metal and glass do not adhere to the cover. Also used for protecting steam and hot oil installations - protects against burns and energy loss. Very good moisture resistance makes it suitable for outdoor use as well. Available in other colors upon request. A VCO version with flame-retardant Velcro is available upon inquiry, with diameters ranging from 22 mm to 140 mm, in lengths up to 30 meters. The Velcro mounting allows for easy installation without disconnecting wires, hoses, or pipes. Material: fiberglass coated with silicone in a rusty color. Operating temperature: from -54°C to +260°C (up to +1093°C for 15 to 20 minutes), (up to +1650°C for 15 to 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gun designed for removing all types of contaminants from surfaces: liquids, fine chips, shavings, etc. Lightweight construction and ergonomic shape ensure easy and comfortable use. For aggressive fluids and media, a gun with a nozzle made of AISI 316 stainless steel is recommended. The lever mechanism allows for precise dosing of the flowing medium. Available model with flow regulation. Compliant with OSHA standard 1910.95 (b) and directive 2003/10/EC. Body material: acetal. Nozzle material: galvanized steel or AISI 316 steel. Nozzle diameter: 8 mm. Sealing: NBR. Working pressure: 16 bar. Operating temperature: from -10°C to +80°C. Flow rate: 380 l/min (at 8 bar pressure). Sound intensity: 85 dB (at 8 bar pressure). Blowing force: 3.92 N.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsP16 AP press with pneumatic drive for hydraulic pump intended for repair workshops, service points, etc. It is adapted for use with interchangeable jaw sets (ordered separately). It features an electric (battery-operated) indicator for achieving the clamping diameter. For example, for a clamping diameter range of 10 to 45 mm, 8 sets of standard jaws should be ordered from FP-16-10 to FP-16-31, where the largest clamping diameter is achieved with the main jaws, which have a range of 38 ÷ 45 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice intended for finishing treatment of pipe ends after cutting (removal of burrs from the outer and inner edges). Designed for pipes made of both carbon steel and stainless steel. Maximum pipe diameter: 42 mm. Voltage: 230 V. Power: 0.18 kW. Speed: 50 rpm. Weight: 30 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOPFLEX® is a safety system that protects equipment from damage and employees from injury in the event of a hose being pulled from the fitting. A hose pulled from the fitting will be held in place by a hose. The clamp, equipped with a rubber seal, ensures stable fastening regardless of changing working pressure. The safety device is intended for hydraulic hoses and is selected for specific types of fittings (metric, inch, flange, etc.). Additionally, the appropriate STOPFLEX® clamp (index OP-SFO-...) must be purchased for the given hose diameter. The system has been tested on hoses operating under the maximum working pressure specified according to the following standards: EN 853, EN 854, EN 855, EN 856, SAE J517. Proper operation is guaranteed provided that the working pressure specified in the standards is not exceeded.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsClamp equipped with a rubber seal for hose installation with a safety cord of the STOPFLEX® system. The clamp does not come with a cord, which must be ordered separately.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality aluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by lever pressure. Made of forged aluminum, protected by anodizing, ensuring high strength, durability, and corrosion resistance. Can be used with water. Ideal for even the most challenging working conditions. The gun is equipped with a standard nozzle with a hole diameter of 1.5 mm, featuring an external connection thread M12x1.25. Other nozzles can be installed instead of the standard nozzle – see EWO gun accessories. Depending on the connection, the gun is available with a EUROSTANDARD 7.2 plug or a hose end with diameters of 6 mm, 9 mm, and 13 mm. Material: aluminum (forging). Nozzle hole diameter: 1.5 mm. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum gun with a 360° rotating nozzle Ø 3 mm, with flow rate adjustment. Utilizes vacuum to draw low-viscosity fluid from the tank. Tank: plastic with a capacity of 0.7 l. Nozzle diameter: 3 mm. Maximum pressure: 10 bar. Operating pressure: 2 to 6 bar. Operating temperature: from +5°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsP16 APZ press with pneumatic drive for hydraulic pump intended for repair workshops, service points, etc. The hydraulic pump drive is connected via a hose, 4 meters long. The press is adapted for use with interchangeable jaw sets (ordered separately). It features an electric (battery-operated) indicator for achieving the clamping diameter. For a clamping diameter range, e.g., from 10 to 45 mm, 8 sets of standard jaws should be ordered from FP-16-10 to FP-16-31, where the largest clamping diameter is achieved with the main jaws, which have a range of 38 ÷ 45 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal insulation made from specially cleaned fiberglass braid through heating and saturation with a special acrylic substance. It does not have loose, falling fibers, lays well, and is relatively abrasion-resistant. It can be expanded and contracted by 25% to fit the desired diameter. Material: fiberglass. Operating temperature: up to +538°C (temporarily up to +705°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRoll for bending metric hydraulic pipes with external diameters of 6, 8, 10, 12, 14, 15, 16, 18, 20, 22, 25, 28, 30, 32, 35, 38, and 42 mm intended for devices: CM42, CMS42, C42, MINI CENTER, and CENTER JUNIOR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMINE SPIRAL+ is an antistatic version of the PROTECTOR cover with added components that reduce flammability and ignition potential, especially in mining applications and machinery used in mines. It has MSHA IC-271 approval issued by the Mine Safety and Health Administration as a flame-resistant product, permitted for use in mines. Flammability class according to UL 94 V-0 (flammability safety standard for plastic materials). Material: brown-gray polyethylene (HDPE). Operating temperature: from -50°C to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHeat shrink end caps are designed to protect the hose after prior cleaning. They eliminate the possibility of re-contaminating the hose, which is problematic and occurs with traditional methods (ill-fitting plastic plugs or caps inserted or screwed into the ends can leave particles generated by shearing the material with the thread). Heat shrink end caps leave no contaminants behind. As long as they are on the ends of the previously cleaned hose, we are guaranteed that it remains clean. Removing such a cap involves pulling the black strip (located along the cap) towards the end of the hose. The caps are for single use only and cannot be reused.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery simple, manual device for bending hydraulic pipes with external diameters ranging from 6 to 18 mm, intended for small workshops. Includes bending rollers and a durable metal case. The device is designed for mounting in a vice (vice not included). Weight: 10 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCleaning plug for hoses and pipes intended for ULTRACLEAN devices. Used where a layer of scale, rust, and other contaminants accumulates on the inner surface of hoses and pipes. Cleaning involves propelling the plug using compressed air. Available diameter range 6 ÷ 110 mm. Possibility of sale in bulk packaging (the number of pieces in bulk packaging depends on the outer diameter of the plug).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSafety hose to prevent the effects of accidental hose disconnection. AC and BC versions have copper sleeves and are intended for use in mining. Cable material: galvanized steel or stainless steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRust and solid contaminant removal gun for hard-to-reach areas using mineral abrasive material. Grain diameter 0.1 ÷ 0.8 mm depending on the material being blasted. Version with a plastic tank with a capacity of 0.7 l. Nozzle diameter: 4 mm. Maximum pressure: 8 bar. Operating pressure: 4 ÷ 7 bar. Operating temperature: from 0°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAluminum compressed air gun designed for removing all types of contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Made using aluminum casting. The gun is equipped with a standard nozzle with a hole diameter of 1.5 mm, interchangeable, with an external connection thread M12x1.25. Instead of the standard nozzle, other nozzles can be installed – see EWO gun accessories. Depending on the connection, the gun is available with a EUROSTANDARD 7.2 plug or a hose coupling with diameters of 6 mm, 9 mm, and 13 mm. Material: aluminum (casting). Nozzle hole diameter: 1.5 mm. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsP16 HP press with manual hydraulic pump drive, intended for repair workshops, technical vehicles, service points, etc. Compact design and low weight allow for repairs at the site of failure. Electric (battery-operated) indicator for achieving the crimping diameter. All FINN-POWER crimping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a crimping diameter range from 10 to 38 mm, 8 sets of standard jaws from FP-16-10 to FP-16-31 should be ordered, with the largest crimping diameter of up to 45 mm achieved using the main jaws.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal protection in the form of a sleeve. Strong, chemically resistant (except for hydrofluoric acid, phosphoric acid, and strong bases). Completely flame resistant. High content of pure silica (over 96%) ensures excellent temperature resistance, flexibility, and minimal shrinkage. It has electroinsulating properties. Does not emit smoke or fumes. Wall thickness is approximately 1.65 mm. Material: silica fiber (silicon dioxide). Operating temperature: up to +982°C (temporarily up to +1650°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPressure hose used as a protective cover for cooling electrical hoses in the metallurgical industry. Inner layer resistant to hot cooling water, process water, corrosion inhibitors, and water with antifreeze fluids. Both inner and outer layers are non-conductive. Electrical resistance R > 1010 Ω/m, breakdown resistance > 6 kV/mm. Outer layer resistant to aging, ozone, and radiant heat from electric arc furnaces, self-extinguishing (compliant with ASTM C-542 standard). Bend radius specified for pressure of 1 bar. Inner layer: black EPDM rubber. Reinforcement: textile braid. Outer layer: black CR rubber. Working pressure: 10 bar. Burst pressure: 30 bar. Operating temperature: from -40°C to +90°C (temporarily +110°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCleaning nozzle for metric pipes, for use with ULTRACLEAN devices. The sealing of the pipe with the nozzle occurs between the front surface of the pipe and the limiter located inside the nozzle. Designed for external diameters and wall thicknesses of metric pipes. Pipe size range: from 3 mm to 50 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNon-adhesive PYROTAPE is designed for wrapping finished hoses and installations without disconnecting them, as a substitute for PYROJACKET, as well as for sealing the ends of hoses and irregularly shaped objects. Resistant to splashes of liquid metal (does not adhere to the cover), flame, moisture, and abrasion. The nominal thickness of the tape is 3.73 mm. During installation, a 30-50% overlap is recommended, along with the use of PYROSIL tape or stainless steel clamps. The tape should not be used for dynamically bent hoses. Material: fiberglass coated with silicone in a rusty color. Operating temperature: from -54°C to +260°C (up to +1093°C for 15 to 20 minutes), (up to +1650°C for 15 to 30 seconds).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral shield made of steel wire designed to protect hoses (hoses) from abrasion, bending, and crushing. Standard length 5 m. Material: galvanized spring steel. Spacing between coils: 5 mm (for wire thickness 1.6 mm), 6 mm (for wire thickness 2 mm), 10 mm (for wire thickness 3 mm).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal "premium" air gun designed for more demanding users. Effectively cleans surfaces of contaminants with air. Characterized by unmatched blowing force and adjustable intensity. Lightweight construction, non-slip grip, and ergonomic shape provide great working comfort. Impact and crack-resistant housing qualifies the device for use in harsh conditions. Compliant with OSHA standard 1-13.1 (European Agency for Safety and Health at Work). Material: polyoxymethylene (POM), thermoplastic elastomer (TPE), aluminum (Al). Sealing: NBR. Working pressure: 16 bar. Burst pressure: 64 bar. Operating temperature: from -20°C to +60°C (16 bar) / up to +80°C (10 bar). Sound intensity: 79 dB ÷ 103 dB.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSuction gun for removing dust and small contaminants. Includes a 250 mm suction nozzle, a 500 mm hose, and a reusable bag. Material: aluminum. Working pressure: 8 bar. Operating pressure: 4 ÷ 8 bar. Flow rate: 500 Nl/min (at 6 bar). Operating temperature: -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsP16 HPZ press with manual hydraulic pump drive (the drive is not integrated with the head), intended for repair workshops, technical vehicles, service points, etc. The compact design and low weight allow for repairs at the site of failure. It features an electric (battery-operated) indicator for achieving the crimping diameter. All FINN-POWER crimping presses are designed to work with interchangeable jaw sets (ordered separately). For a crimping diameter range, e.g., from 10 to 45 mm, 8 sets of standard jaws from FP-16-10 to FP-16-31 should be ordered, where the largest crimping diameter is achieved with the main jaws, which have a range of 38 ÷ 45 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTool shank EST-L designed for machining the outer layer of rubber in hydraulic hoses requiring a longer cutting length. Material: hardened steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREELCRAFT series 30000 drum reel with manual drive for water, air, and oil. It features high durability and resistance to vibrations. The construction is bolted, with no welded components. Designed for industrial and outdoor applications. The drum does not come with a hose, which must be ordered separately. Available version BA with gearbox. The drum of this series can also be mounted on a cart. Advantages: robust construction drum for long hoses. Material: powder-coated steel. Operating temperature: from -30°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCleaning nozzle for hoses, to be used with ULTRACLEAN devices. The nozzle can also be used for cleaning pipes, thick-walled tubes, and joints. This is the most popular type of nozzle. Size: 1/4" ÷ 2".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExtended straight nozzle with a hole diameter of 3 mm for air guns, finished with a metric thread M12x1.25. Tube diameter: 5 mm. Available lengths: 115 mm, 165 mm, 265 mm, and 415 mm. Material: nickel-plated brass. Maximum pressure: 10 bar. Operating temperature: from -10°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral protection designed to safeguard hoses (hoses) against abrasion and crushing. It also serves to maintain a group of hoses (hoses) in the form of a bundle. Resistant to weather conditions, UV radiation, ozone, fire (according to UL94VO), oil, diesel fuel, and water. SPIRALINA FLEX has a thinner wall and is more flexible compared to the standard SPIRALINA protection. Non-conductive - surface conductivity 1010 Ω. Material: rigid PVC (has shape memory). Standard length: 20 m. Operating temperature: from -10°C to +60°C (temporarily up to +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermal reflective shield made of PYREFLECT BLANKET fabric, double-stitched to the required diameter. Reflects over 90% of radiant heat energy. Used in cases where radiant heat (infrared radiation) must be contained and reflected. Resistant to abrasion, water, and oil. Good flame resistance. Available upon request in VCO version with Velcro in diameters ranging from 19 mm to 305 mm. Velcro mounting allows the shield to be easily installed without disconnecting wires, hoses, or pipes. Material: aramid fabric, aluminum foil. Operating temperature: up to +343°C (temporarily up to +538°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEasy-to-use air-powered gun made of durable and corrosion-resistant acetal designed for suctioning, e.g., engine oil, hydraulic oil, coolant, etc. Standardly equipped with a transparent tank with a capacity of 1.2 l and 2.0 l, facilitating the monitoring of the suctioned oil or other fluids, and a suction hose 1.5 meters long ending with a rigid tube with an outer diameter of Ø 10 mm (tube length 26 cm). Continuous operation is possible thanks to the lever lock. For engine oil, suction is recommended with a warm engine – min. oil temperature 50°C. Important! Not to be used for explosive fluids, e.g., gasoline. Material: gun, handle, cover, valve – acetal (POM); tank – polyethylene (PE); sealing – NBR; suction hose – PVC; tube – polyamide (PA11). Operating pressure: 6 ÷ 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsP20 AP hydraulic press with pneumatic pump drive intended for repair workshops, service points, etc. It is available in two versions: with a mechanical indicator for achieving the clamping diameter (the control of the set clamping diameter is done using two control pins) and an electric (battery-operated) version with an LED indicator informing about the achieved clamping diameter, adjustable with a micrometer knob. All FINN-POWER clamping presses are designed to work with interchangeable jaw sets (ordered separately). For example, for a clamping diameter range from 10 to 61 mm, 12 sets of standard jaws from FP-20-10 to FP-20-54 should be ordered.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTool pin for EST-S tool designed for machining the outer layer of rubber in machinable hydraulic hoses. Material: hardened steel.
