Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPWZ crimping pliers are designed for crimping hoses with textile reinforcement using EC type ferrules. They allow for crimping in hard-to-reach places. The set includes three jaw sets. Working range (internal diameter of the hose) approx. 5 ÷ 10 mm. Weight: 3.5 kg.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStandard cutting disc (smooth) made of hardened steel, for use in hydraulic hose cutting machines. Diameter range: 200 ÷ 520 mm.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFSI type mandrel used for machining the inner layer of cuttable hydraulic hose rubber. Standardly supplied with a cutting knife, length adjustment ring, and securing screws. Compatible with the tool holder of the FINN POWER FS50 device. Mandrel diameter: from 1/2" to 2".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFSE type mandrel used for machining the outer layer of hydraulic hoses that can be machined. Compatible with the tool holder of the FINN POWER FS50 device. Available in sizes: from 3/16" to 2".
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsKnife holder for the EST-L tool designed for machining the outer layer of rubber in hydraulic hoses requiring greater cutting length. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple device for cleaning hoses and pipes with compressed air. It has two nozzles made of plastic, one for hoses 3/16" to 1" and the other for hoses 1" to 2". Pressing the hose against the nozzle opens the air valve, allowing for hose cleaning. Air pressure: min. 6 bar. Pneumatic system connection: 1/2" BSP.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for oil filling and suction and filtration of oil from press tanks, machines, and hydraulic systems. Parameters: electric drive 0.55 kW, 400V; pump 39 l/min; filter 25 µm (also available in 10 and 20 µm); suction filter 125 µm. Weight: 60 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsDevice for oil filling, suction, and filtration from press tanks, machines, and hydraulic systems. Parameters: electric drive 400V, 0.55kW; pump 39 l/min; filter 25 µm (also available in 10 and 20 µm); suction filter 125 µm; electronic oil flow meter; electronic filter replacement indicator. Weight: 87 kg.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for securing screws against loosening. It features medium viscosity and medium strength. It has KTW certification - approval for installation in drinking water systems. Disassembly is possible using standard tools. Maximum thread size: M 36. Operating temperature: -60°C to +150°C. Packaging type "pen" with a capacity of: 20 and 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic sealant for securing screws against loosening and for locking pins. It features medium viscosity and very high strength. Difficult to disassemble. Maximum thread size: M20. Operating temperature: -60°C to +150°C. Packaging type "tube" with a capacity of: 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAnaerobic thread sealant for passive materials without an activator. Sealing of hydraulic and pneumatic systems. Increased viscosity, high strength – very difficult disassembly. Maximum gap 0.20 mm. Color: green. Operating temperature: from -60°C to +180°C. Packaging type "pen" with a capacity of: 20 and 50 ml.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThermally resistant sealant in the form of a semi-liquid paste that cures to a non-sticky state within 10 to 15 minutes, and completely within 18 hours. Supplied in 310 ml tubes for a caulking gun. It should be used in well-ventilated areas and avoid contact with gasoline or diesel fuel. Material: a mixture of amorphous silica, polydimethylsiloxane (a type of silicone), iron oxide, and a catalyst. Operating temperature: from -59°C to +287°C (temporarily up to +538°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThin-walled insulating cover designed for cooling electrical hoses in automatic welding systems. Electrical resistance 1x108 Ω/m. Inner layer material: black SBR/NR rubber. Outer layer material: black SBR/NR rubber. Reinforcement: textile braid. Working pressure: 10 bar. Operating temperature: from -30°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe UPS crimping press is designed for crimping textile-reinforced hoses with EC-type ferrules using a manual lever. It is standardly equipped with two sets (6 crimping segments each) of jaws. The working range for the internal diameter of crimped hoses for the UPS-1 press: DN 3 ÷ 8 (internal diameter range of EC ferrules: 8 ÷ 17 mm), DN 10 ÷ 16 (internal diameter range of EC ferrules: 18 ÷ 28 mm). The working range for the internal diameter of crimped hoses for the UPS-2 press: DN 20 (internal diameter range of EC ferrules: 30 ÷ 34 mm), DN 25 (internal diameter range of EC ferrules: 32 ÷ 38 mm). An additional base with the index EC-100250 can be purchased for the press.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEffective shut-off valve compatible with all pneumatic installations with standard compressed air consumption, designed to protect the operator and the pneumatic installation in case of damage (e.g., pipe rupture or hose burst). Meets the requirements: EN 983 § 5.3.4.3.2, EN 4414 §5.4.5.11.1, ATEX Group II Category II, TÜV 01-02-0145, TÜV AZ 77318 2. The valve should be selected considering: flow rate, length and diameter of the hose, as well as the internal diameters of the installation components. For questions or concerns, please contact Tubes International. Connection: GZ BSP or GW BSP (inlet) / GW BSP (outlet). Body material: aluminum. Piston material: POM (1/4" ÷ 1/2"), aluminum (3/4"). Spring material: stainless steel. Sealing: NBR. Minimum pressure: 4 bar. Working pressure: 18 bar. Operating temperature: from -20°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe electric bumper for the P20 MSN press is one of the control options for the clamping press. Clamping occurs after pressing the hose with the coupling against the bumper located behind the press head.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of nozzles (suction attachments) for a suction gun (long and wide crevice). Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet of high-strength 1/2" socket wrenches in sizes 17, 19, and 21 mm, coated with plastic. Available in various colors for easy size identification. Entirely enclosed in a convenient plastic case. Compatible with pneumatic wrench EW-741160.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary connector for use with most pneumatic tools. The ability to rotate 360° effectively prevents the connected hose from twisting (maintains proper airflow) and allows for free operation with the connected pneumatic tool. Maximum working pressure: 10 bar. Material: aluminum. Weight: 78 g.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPowder-coated carbon steel drum intended for the food, chemical, manufacturing, repair workshop industries, etc. It features a unique EZ-Coil® spring mechanism that allows for automatic hose retraction up to 80% slower than traditional spring systems. This system enhances operator safety, extends the lifespan of the drum, swivel coupling, and hose. The drum is equipped with an MP20 hose designed for the transmission of air, water, and light chemicals, polyurethane paints, epoxy paints, and water-based solvents, ending with a GZ 3/8" BSP fitting (face seal). The mounted bumper prevents hose retraction. Drum material: carbon steel (blue color). Swivel coupling material: brass. Fittings, adapters, and sleeves: carbon steel. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSteel drum powder-coated, intended for the chemical industry, manufacturing plants, repair workshops, etc. It features a unique EZ-Coil® spring mechanism that allows for automatic hose retraction up to 80% slower than traditional spring systems. This system enhances operator safety, extends the lifespan of the drum, swivel coupling, and hose. The drum is equipped with a TUBES 2116 T hose with an inner diameter of 13 mm, for the transmission of air and water, ending with a GZ 1/2" BSP fitting. The mounted bumper prevents the hose from retracting. Drum material: carbon steel. Swivel coupling material: brass. Fittings, adapters, and sleeves: carbon steel. Operating temperature: up to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompact valve regulating maximum compressed air flow for use with, for example, pneumatic tools. The knob allows for easy flow adjustment. Maximum working pressure: 15 bar. Material: aluminum. Weight: 18 g.
