Is the Profile gasket to DIN3869, Viton suitable for high-pressure connections with DIN 3852-11E metric and inch threads?

Yes. The Profile gasket to DIN3869, viton Format is designed specifically for high-pressure connections with metric and/or inch threads according to DIN 3852-11E. Made of Viton (Shore 80), it provides excellent chemical resistance, high temperature stability and good sealing performance under pressure. Ensure correct size, surface finish and proper installation torque per DIN 3852-11E to achieve reliable, leak-free joints; verify compatibility with the specific media, temperature and pressure limits in your application.

Can Profile gasket to DIN3869, Viton withstand temperatures and chemicals typical for high-pressure DIN 3852-11E applications?

Profile gasket to DIN3869, Viton Format: Viton gaskets generally offer excellent chemical resistance and high-temperature performance (typically -20Â°C to +200Â°C continuous, short peaks up to â250Â°C) and resist many oils, fuels, hydraulic fluids and aggressive chemicals. For high-pressure DIN 3852-11E applications, a Viton profile gasket with Shore 80 hardness can often withstand required temperatures and common chemical exposures, while providing good sealing under compression. However, compatibility depends on exact fluid chemistry, pressure, temperature cycles and sealing geometry. Confirm suitability by checking the specific fluidâs compatibility with Viton, the maximum operating temperature and pressure of the system, and performing application-specific testing or consulting the gasket/manufacturer data sheet.

Does Profile gasket to DIN3869, Viton comply with pressure ratings for DIN 3852-11E threaded connections?

Yes. Profile gasket to DIN3869, Viton is designed specifically for highâpressure connections with metric and/or inch threads according to DIN 3852â11E, and when manufactured and installed per those standards it complies with the pressure ratings for DIN 3852â11E threaded connections. The material (Viton, hardness 80 Shore A) provides chemical and temperature resistance suitable for many highâpressure applications, and the profile gasket geometry specified by DIN 3869 matches the sealing surfaces and compression requirements of DIN 3852â11E. Important notes: compliance assumes correct gasket dimensions, proper surface finish of the mating parts, correct installation torque and conditions, and that operating media and temperatures are within Vitonâs limits. If any of these factors deviate, sealing performance and allowable pressure may be reduced; for critical applications verify with manufacturer datasheets and pressure/temperature ratings for the specific gasket batch and system.

Profile gasket to DIN3869, viton

All products, General purpose seals/

Additional information

Maximum operating temperature [°C]	200
Minimum operating temperature [°C]	20

Profiled gasket according to DIN 3869 for high-pressure connections with metric and/or inch threads according to DIN 3852-11E. Material: Viton, hardness 80 according to Shore.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-UE-08-V	DIN3869 gasket 9.9x6.5x1 mm (M8), Viton	-	-	In stock	Enquiry
TI-UE-10-V	DIN3869 gasket 11.9x8.4x1 mm (M10, 1/8" BSP), Viton	-	-	In stock	Enquiry
TI-UE-12-V	DIN3869 gasket 14.4x9.8x1.5 mm (M12), Viton	-	-	In stock	Enquiry
TI-UE-14-V	DIN3869 gasket 16.5x11.6x1.5 mm (M14, 1/4" BSP), Viton	-	-	In stock	Enquiry
TI-UE-16-V	DIN3869 gasket 18.9x13.8x1.5 mm (M16), Viton	-	-	In stock	Enquiry
TI-UE-17-V	DIN3869 gasket 18.9x14.7x1.5 mm (3/8" BSP), Viton	-	-	In stock	Enquiry
TI-UE-18-V	DIN3869 gasket 20.9x15.7x1.5 mm (M18), Viton	-	-	In stock	Enquiry
TI-UE-20-V	DIN3869 gasket 22.9x17.8x1.5 mm (M20), Viton	-	-	In stock	Enquiry
TI-UE-21-V	DIN3869 gasket 23.9x18.5x1.5 mm (1/2" BSP), Viton	-	-	In stock	Enquiry
TI-UE-22-V	DIN3869 gasket 24.3x19.6x1.5 mm (M22), Viton	-	-	In stock	Enquiry
TI-UE-26-V	DIN3869 gasket 29.2x23.9x1.5 mm (M26-27, 3/4" BSP), Viton	-	-	In stock	Enquiry
TI-UE-33-V	DIN3869 gasket 35.7x29.7x2 mm (M33, 1" BSP), Viton	-	-	In stock	Enquiry
TI-UE-42-V	DIN3869 gasket 45.8x38.8x2 mm (M42, 1.1/4" BSP), Viton	-	-	In stock	Enquiry
TI-UE-48-V	DIN3869 gasket 50.7x44.7x2 mm (M48, 1.1/2" BSP), Viton	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Profiled gasket according to DIN 3869 for high-pressure connections with metric and/or inch threads according to DIN 3852-11E. Material: Viton, hardness 80 according to Shore.