Our products
Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external thread connector, type VSL, with a smooth tail for hose, for EN 14420-3 / DIN 2817 clamp (only clamps RS 636... and RS-637...), for installation on industrial hoses - e.g., in handling applications. Also available in AISI 316 stainless steel coated with E-CTFE fluoropolymer lining and conductive CF-E-CTFE lining (R <106 Ω), suitable for very aggressive chemical substances. Working pressure: 25 bar (for AL version - 16 bar, PP - 6 bar). Connector material: brass (MS), AISI 316 stainless steel (SS), galvanized steel (ST), aluminum (AL), polypropylene (PP). Sealing: flat (face). Operating temperature: from -20°C to +65°C according to EN-14420.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal DM adaptor with internal BSP thread is designed for connecting pipes (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all types of media: water, air, chemical substances, petrochemical products. Depending on the size, material of construction, and manufacturer, the fittings have various shapes of flange for a wrench. Material: AISI 316 steel. Sealing: flat gasket (PTFE).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal BSP threaded connector with a rotating nut and hose end, type MSL, is designed for mounting on rubber hoses and certain industrial plastic hoses. Depending on the material used, they are suitable for all types of media: chemical substances, petrochemical products, liquefied gas. For very aggressive chemical substances, the connectors are coated with E-CTFE fluoropolymer lining and conductive CF-E-CTFE lining (R <106 ?). Mounted using shell clamps EN 14420-3 / DIN 2817 (only clamps RS 636... and RS-637...). They can also be crimped with appropriate crimping sleeves. Working pressure: 25 bar. Connector material: brass (MS), stainless steel 316 (SS), galvanized steel (ST). Sealing: flat gasket (standard polyurethane, for stainless steel PTFE). Operating temperature: from -20°C to +65°C according to EN-14420.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal adaptor ADN with external BSP and BSPT threads is designed for connecting pipes (hoses with fittings) and elements of industrial installations. Depending on the size, material, and manufacturer, the fittings have various shapes of the flange for a wrench. Reducing adaptors are also available. Material: stainless steel AISI 304 or AISI 316. Sealing: flat (face) - BSP; on the thread (Teflon tape) - BSPT. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsExternal thread BSP coupling, type VSLR, for shell clamp with corrugated tail EN 14420-3 / DIN 2817 (only clamps RS 636... and RS-637...) for installation to industrial hoses - e.g. in handling applications. Working pressure: 25 bar. coupling material: brass (MS), stainless steel AiISI 316 (SS). Sealing: flat (face). Operating temperature: from -20°C to +65°C according to EN-14420.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal adapter DN with external BSP thread on both sides is designed for connecting pipes (hoses with fittings) and elements of industrial installations with working pressures up to several dozen bar. Depending on the size and manufacturer, the fittings have different shapes of the flange for a wrench. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlat gasket (face) GD designed for sealing the connection of external cylindrical thread (e.g., GZ BSP) with internal thread (e.g., GW BSP). The gasket should be placed in the internal thread socket in a way that prevents its eccentric positioning and should adhere to the flat surfaces of the internal thread socket and the external threaded fitting. Working pressure: 25 bar. Gasket material: EPDM - approximate temperature range: from -50°C to +180°C; Novapress® - approximate temperature range: from -25°C to +250°C; PTFE - approximate temperature range: from -40°C to +250°C; polyurethane (PU) - approximate temperature range: from -40°C to +110°C; viton - approximate temperature range: from -20°C to +200°C. Maximum operating temperature range, without considering the influence of the medium (chemical resistance to the substance flowing through the connection at a specified temperature).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRS reducing adaptor with internal and external BSP, NPT threads, designed for connecting pipes (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all types of media: water, air, chemical substances, petrochemical products. Depending on the size and manufacturer, the fittings have various shapes of flange for a wrench. Material: brass. Sealing: flat gasket (polyurethane) - GW BSP.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal BSP threaded coupling, for shell clamp EN 14420-3 / DIN 2817 (dedicated clamp indices: RS 636... and RS-637...) with a corrugated tail, type MSLR. The coupling is intended for installation among other things for industrial hoses - for example in handling applications. Working pressure: 25 bar. Coupling material: brass (MS), stainless steel 316 (SS). Sealing: flat gasket (included, standard polyurethane, for stainless steel PTFE). Operating temperature: from -20°C to +65°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRS reducing adaptor with internal and external BSP, NPT, and trapezoidal threads, designed for connecting pipes (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all types of media: water, air, chemical substances, petrochemical products. For very aggressive chemical substances, couplings are available with a chemically resistant coating of ECTFE fluoropolymer, and a conductive coating version CF-ECTFE (R <106 Ω). Depending on the size and manufacturer, couplings have various shapes of flange for a wrench. Material: AISI 316 steel. Sealing: flat gasket (PTFE) - BSP GW.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector with external tapered thread BSPT and NPT, type VSL with smooth tail and lock. Used for industrial hoses for the transmission of various media, including liquefied gas, petrochemical products, or chemical substances. The most commonly used clamp for mounting the connector on the hose is the shell clamp EN 14420-3 / DIN 2817 (only clamps RS 636... and RS-637...) or a crimping sleeve. Working pressure: 25 bar. Connector material: brass (MS), stainless steel AISI 316 (SS), galvanized steel (ST). Connectors are available with a coating resistant to aggressive chemical substances made of E-CTFE fluoropolymer. Sealing: on the thread (Teflon tape), possibility of flat sealing on the face surface (BSPT). Operating temperature: from -20°C to +65°C according to EN-14420.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal adaptor DN with external BSP and NPT threads on both sides is designed for connecting pipes (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. For very aggressive chemical substances, couplings are available with a chemically resistant coating made of ECTFE fluoropolymer, as well as a conductive version CF-ECTFE (R <106 Ω). Depending on the size, material of construction, and manufacturer, the couplings have various shapes of flange for a wrench. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete MSL coupling for hose with aluminum shell clamp EN 14420-3 (DIN 2817), finished with internal thread and hexagonal nut. End material: AISI 316 steel. Seal: PTFE. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRN reducing adapter with external BSP, NPT, and metric threads is designed for connecting pipes (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all types of media: water, air, chemical substances, petrochemical products. Depending on the size and manufacturer, the fittings have various shapes of the flange for a wrench. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRN reducing adaptor with external BSP, NPT, and trapezoidal threads is designed for connecting pipes (hoses with fittings) and components of industrial installations with working pressures up to several dozen bar. Used for all types of media: water, air, chemical substances, petrochemical products. Depending on the size and manufacturer, the fittings have various shapes of flange for a wrench. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal adapter DN with symmetrical external trapezoidal ACME thread on both sides, intended for connecting components of liquefied gas (LPG) installations. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRV type adapter with internal symmetrical trapezoidal ACME thread, featuring a rotating brass nut and external NPT thread, designed for connecting components of liquefied petroleum gas (LPG) installations. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal adaptor ADN with external BSP and BSPT threads is designed for connecting pipes (hoses with fittings) and components of industrial installations. Depending on the size and manufacturer, the fittings have various shapes of the key flange. Reducing adaptors are also available. Material: brass. Sealing: flat (face) - BSP; on the thread (Teflon tape) - BSPT. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal adaptor ADN with external BSP and BSPT threads is designed for connecting pipes (hoses with fittings) and components of industrial installations. Depending on the size and manufacturer, the fittings have various shapes of the flange for a wrench. Material: galvanized steel. Sealing: flat (face) - BSP; on the thread (Teflon tape) - BSPT. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete MSL coupling for hose with aluminum shell clamp EN 14420-3 (DIN 2817), finished with internal thread and brass nut, intended for connecting components of liquefied gas (LPG) installations. Material of the fitting: carbon steel, galvanized. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete MSL coupling for hose with aluminum shell clamp EN 14420-3 (DIN 2817), finished with internal thread and hexagonal nut, brass, intended among others for connecting components of liquefied gas (LPG) installations. Material of the end: carbon steel, galvanized. Working pressure: 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsInternal BSP threaded connector with a rotating nut and hose end, type MSL, is designed for mounting to rubber hoses and certain industrial plastic hoses. Fastened using shell clamps EN 14420-3 / DIN 2817 (only clamps RS 636... and RS-637...). They can also be clamped with appropriate crimping sleeves. Working pressure: 25 bar. Material: hose end - stainless steel AISI 316, rotating nut - brass. Sealing: flat gasket (standard PTFE included). Operating temperature: from -20°C to +65°C according to EN-14420.
