Can the Adaptor with external thread BSP, BSPT, brass, type ADN be used for both BSP and BSPT sealed connections in the same installation?

Yes . the Adaptor with external thread BSP, BSPT, brass, type ADN can be used for both BSP and BSPT sealed connections in the same installation, but with these important conditions: - Sealing method differs by thread type: BSP (parallel) requires a flat (face) seal, so the mating component must provide a flat sealing surface and the face seal must be correctly compressed; BSPT (tapered) requires thread sealing (e.g., PTFE tape) applied to the threads to achieve a pressure-tight joint. - Do not mix seal types on the same joint: use the appropriate sealing method for each connection (face seal for BSP, thread tape for BSPT). - Ensure compatibility of mating fittings: the mating parts must match the ADN external thread form (parallel for BSP, tapered for BSPT) and size; wrong pairing can lead to leaks or damage. - Installation practice: assemble and seal each connection per manufacturer torque/spec recommendations; avoid over-tightening tapered threads after face seals. - Working pressure: respect the 25 bar rating for the assembly and use appropriate fittings and seals rated for that pressure. In short, the Adaptor with external thread BSP, BSPT, brass, type ADN supports both BSP and BSPT connections in the same installation provided each joint is paired and sealed according to its thread type and installation guidelines.

Is the Adaptor with external thread BSP, BSPT, brass, type ADN suitable for reducing pipe sizes in industrial installations?

Yes. The Adaptor with external thread BSP, BSPT, brass, type ADN Format is suitable for reducing pipe sizes in industrial installations. It is specifically described as designed for connecting pipes (hoses with fittings) and components, and reducing adaptors are available. Made of brass, it offers a working pressure up to 25 bar. Note sealing differs by thread type: flat (face) sealing for BSP and thread sealing (Teflon tape) for BSPT - ensure compatibility with your systemâs sealing method and pressure requirements before installation.

Does the Adaptor with external thread BSP, BSPT, brass, type ADN require different installation tools for BSP vs BSPT?

Yes. in most cases different installation tools or at least different tightening methods are required for Adaptor with external thread BSP, BSPT, brass, type ADN. Why: BSP (parallel) and BSPT (tapered) threads seal differently. According to the product description, Adaptor with external thread BSP, BSPT, brass, type ADN uses a flat (face) seal for BSP and thread sealing (Teflon tape) for BSPT. That means: - BSP (parallel): The sealing surface is the flat face; the thread primarily locates and holds the connection. You must align the flat face against the mating component and tighten just enough to compress the face seal without distorting it. A wrench that fits the key flats on the hexagon is used; avoid overâtorquing because the seal is on the face, not the thread. - BSPT (tapered): Sealing occurs on the mating thread, so installation requires creating a thread seal (Teflon tape or thread sealant) and proper engagement of the tapered threads. Tapered threads typically require more careful torqueing to achieve the correct interference fit as the taper tightens. A wrench for the hex flats is used, but you may need to apply additional turns and controlled torque compared with BSP, and follow recommended tape/compound practices. Practical implications: - Use the same type of wrench for the hex flats, but change your assembly technique: face seating and moderate torque for BSP; thread sealing (tape/compound) and controlled higher torque for BSPT. - If fittings from different manufacturers have different hex sizes or keyâflange shapes, ensure your tool fits securely. - Follow manufacturer torque recommendations when available and test for leaks at working pressure (25 bar). Conclusion: Adaptor with external thread BSP, BSPT, brass, type ADN does not necessarily require entirely different wrench types, but does require different sealing materials and tightening techniques for BSP versus BSPT.

Adapter with BSP, BSPT male thread, brass, type ADN

All products, Threaded couplings and adapters/

Additional information

Material	B – brass (bronze)

Hexagonal adapter ADN with BSP, BSPT male threads on both sides is designed for connecting lines (hoses with fittings) and components of industrial installations. Depending on the size and manufacturer, the couplings have various shapes of wrench flats. Reducing adapters are also available. Material: brass. Sealing: flat (face) – BSP; on the thread (PTFE tape) – BSPT. Working pressure: 25 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ADN-01-050-050-MS	Adapter 1/2" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-01-075-075-MS	Adapter 3/4" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-01-100-100-MS	Adapter 1" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-01-125-125-MS	Adapter 1.1/4" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-01-150-150-MS	Adapter 1.1/2" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-01-200-200-MS	Adapter 2" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-01-250-250-MS	Adapter 2.1/2" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-01-300-300-MS	Adapter 3" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-01-400-400-MS	Adapter 4" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-02-050-050-MS	Adapter 1/2" BSPT male / 1/2" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-02-075-075-MS	Adapter 3/4" BSPT male / 3/4" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-02-100-100-MS	Adapter 1" BSPT male / 1" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-02-125-125-MS	Adapter 1.1/4" BSPT male / 1.1/4" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-02-150-150-MS	Adapter 1.1/2" BSPT male / 1.1/2" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-02-200-200-MS	Adapter 2" BSPT male / 2" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-02-250-250-MS	Adapter 2.1/2" BSPT male / 2.1/2" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-02-300-300-MS	Adapter 3" BSPT male / 3" BSP male, brass	-	25	In stock	Enquiry
TI-ADN-02-400-400-MS	Adapter 4" BSPT male / 4" BSP male, brass	-	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hexagonal adapter ADN with BSP, BSPT male threads on both sides is designed for connecting lines (hoses with fittings) and components of industrial installations. Depending on the size and manufacturer, the couplings have various shapes of wrench flats. Reducing adapters are also available. Material: brass. Sealing: flat (face) – BSP; on the thread (PTFE tape) – BSPT. Working pressure: 25 bar.