Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, operated by a push rod, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pneumatic control distribution valve, most commonly used for controlling the operation of actuators. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/3 - five-way, three-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve, operated by a selector, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal manual control distribution valve, operated by a selector, commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCut-off valve type STP L 2/2 unidirectional in the version with threaded connection with an O-ring on one side and a plug-in connection on the other side (thread - hose) intended for direct installation in the supply connection of the actuator (according to the flow direction indicated by an arrow on the valve body). A properly connected STP L valve allows for free flow of supply air to the working chamber of the actuator, while preventing its venting without applying control pressure to the plug-in connection Ø4 (Ø5/32”). Operating pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVNR L type check valve in a version with a threaded connection with an O-ring on one side and a plug connection on the other side (thread - hose), with holes for wall mounting. Working pressure: 12 bar. Sealing: NBR. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVNR L type check valve in a version with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread), with holes for wall mounting. Working pressure: 12 bar. Sealing: NBR. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeries REG pressure reducing valves, SKILLAIR® series, without end plates, are used for regulating working pressure, ensuring proper operation of devices. They can be installed in series and supplied with the same pressure. Each valve can have a different output pressure setting, independent of the settings of other valves. The output air is taken from the pressure gauge connection (1/8”). Size: 100. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Pressure gauge connection: GW BSP 1/8". Flow rate: 950 l/min (at input pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeries REG pressure reducing valves, SKILLAIR® series, with end plates, are used to regulate working pressure, ensuring the proper operation of devices. They can be installed in series and supplied with the same pressure. Each valve can have a different output pressure setting, independent of the settings of other valves. The output air is taken from the pressure gauge connection (1/8”). Size: 100. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Connection: BSP 1/4" or 3/8". Pressure gauge connection: BSP 1/8". Flow: 950 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSet F + D series SKILLAIR® with a high degree of reliability consists of a filter and a fine air filter. The purpose of the set is to purify the air supplied by the compressor and to remove with high accuracy liquid and solid contaminants contained in the compressed air. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and type of discharge. Filtration degree: filter - 5 µm, fine filter - 99.97% at 0.01 µm. Connection: GW BSP 1/4" to 1". Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe F + L set of the SKILLAIR® series with a high degree of reliability consists of an air filter and a lubricator. The purpose of the set is to purify the air supplied by the compressor and to lubricate with an oil mist. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and type of discharge. Filtration degree: 5 µm, 20 µm, 50 µm. Connection: BSP 1/4" to 1". Condensate discharge: manual/semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Nominal flow: from 1200 to 4500 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCompressed air preparation unit F + L, designed for the BIT series. It is a compact unit consisting of a filter with various filtration stages and a lubricator with high oiling stability. Advantages of the set: 1) High degree of condensate separation. 2) Manual/semi-automatic or automatic condensate drain. 3) Oiling at low flow rates. Size: 1/8", 1/4". Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Connection: BSP 1/8", 1/4". Condensate drain: manual/semi-automatic (RMSA), automatic (SAC). Flow: 600 l/min - 1/4" (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe compressed air preparation unit F + L, designed for the NEW DEAL series, consists of a filter with various filtration stages and a lubricant with high dosing stability. Key advantages: 1) Metal tank with external condensate level viewing. 2) Manual/semi-automatic or automatic condensate drain. 3) Micrometric oil dosing adjustment. 4) Guaranteed operation at low flow rates. Size: 1/4", 3/8", 1/2", 3/4", 1". Supply pressure: up to 18 bar, for drain RA up to 10 bar. Operating temperature: up to +50°C. Connection: BSP female thread 1/4", 3/8", 1/2", 3/4", 1". Condensate drain: manual/semi-automatic (RMSA), automatic (SAC, RA). Flow: 1000 l/min - 1/4", 3500 l/min - 3/8", 1/2", 9500 l/min - 3/4", 1" (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FR + L set of the SKILLAIR® series with a high degree of reliability consists of an air filter, a pressure reducing valve, and a lubricator. The purpose of the set is to purify the air supplied by the compressor, reduce and maintain the set pressure stably during fluctuations in supply pressure, and lubricate with an oil mist. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and type of discharge. Filtration degree: 5 µm, 20 µm, 50 µm. Output pressure range: 0÷8, 0÷12 bar. Connection: GW BSP 1/4" ÷ 1". Condensate discharge: manual/semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Nominal flow: from 800 to 4000 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe FRL set series SKILLAIR® with a high degree of reliability consists of an air filter, a pressure reducing valve, and a lubricator. The purpose of the set is to purify the air supplied by the compressor, reduce and maintain a stable set pressure amidst fluctuations in supply pressure, and lubricate with an oil mist. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on size and type of discharge. Filtration degree: 5 µm, 20 µm, 50 µm. Output pressure range: 0÷8, 0÷12 bar. Connection: GW BSP 1/4" ÷ 1". Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Operating temperature: up to +50°C. Nominal flow: from 800 to 4500 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFRL compressed air preparation unit with a high-reliability piston-type regulator, designed for the NEW DEAL series, characterized by resistance to harsh working conditions. Key advantages: 1) Stability of set pressure with variable supply pressure. 2) Metal tank with external condensate level viewing. 3) Oil dosing proportional to air flow. 4) Micrometric adjustment of oil dosing. 5) Guaranteed operation at low flow rates. Output pressure range: 0÷8, 0÷12 bar. Supply pressure: up to 18 bar, for drain RA up to 10 bar. Filtration degree: 4 µm, 20 µm, 50 µm. Operating temperature: up to +50°C. Connection: BSP female thread 1/4", 3/8", 1/2", 3/4", 1". Pressure gauge connection: BSP female thread 1/8" for valve up to 1/2", above - BSP female thread 1/4". Condensate drain: manual/semi-automatic (RMSA), automatic (SAC, RA). Flow: 400 l/min - 1/4", 2000 l/min - 3/8", 1/2", 3600 l/min - 3/4", 3700 l/min - 1" (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsComplete mini-FRL unit series BIT with shaped membrane. Characterized by high flow rate with reduced pressure drop, high degree of condensate separation, oil dosing proportional to air flow, capability to operate at low flow values. Supply pressure: up to 13 bar. Operating temperature: up to +50°C. Output pressure ranges: 0÷2, 0÷4, 0÷8, 0÷12 bar. Filtration degree: 5 µm, 20 µm, 50 µm. Connection: BSP 1/8", 1/4". Pressure gauge connection: BSP 1/8". Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow: 280 l/min (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe VFR + L series SKILLAIR® set with a high degree of reliability consists of a shut-off valve, air filter, pressure reducing valve, and lubricator. The purpose of the set is to purify the air supplied by the compressor, reduce and maintain a stable set pressure during fluctuations in supply pressure, and lubricate with an oil mist. The function of the shut-off valve is to separate the working system from the supply air, which occurs in the closed position, simultaneously venting the system. Size: 100, 200, 300. Supply pressure: up to 15 bar, depending on the size. Output pressure range: 0÷8, 0÷12 bar. Filtration degree: 20 µm. Connection: BSP 1/4" to 1". Condensate drain: manual / semi-automatic (RMSA). Operating temperature: up to +50°C. Nominal flow: from 800 to 4000 l/min (at an inlet pressure of 6 bar Δp = 1 bar), depending on the size.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector with MAN L pressure gauge in version with threaded connection with O-ring on one side and plug connection on the other side (thread - hose). The pressure gauge housed in a metal shield ensures accurate readings despite its small size. It can be oriented in any direction by manual rotation. Working pressure: 12 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled socket coupling with external thread type C5/C designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable "T" plug connector with external thread, type R 20/A, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality 90° angle connector, made entirely of AISI 316L steel, series 60130. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
