Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pressure gauge mounted to reducers of types SYNTESI, BIT, SKILLAIR, and NEW DEAL. The measurement range should be selected appropriately to the working pressure so that it does not exceed 75% of the maximum range. Scale expressed in bars and PSI. Size: 1/8" or 1/4". Operating temperature: up to +50°C. Measurement range: 0 ÷ 4 or 0 ÷ 12 bar. Housing material: plastic. Dial material: aluminum. Filling: none (dry gauge).- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType A3 coupling designed for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of a tapered thread, Teflon tape or sealant is needed; for a cylindrical thread, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless steel nipple type 62000 with external BSPT thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPolyamide and aluminum pipe is used in compressed air installations. Recommended for the SPEEDFIT system. Material: polyamide, aluminum. Color: blue, black. Standard pipe length (one section): 3 m (shipping in sections of 1 m, 2 m, or longer upon agreement of transport costs).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBANJO screw with D7 washers for couplings type R13, R14, D12, D17, D5, D6. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMWSE silencer with external thread used in compressed air systems to reduce noise levels. The noise reduction achievable by installing the silencer, measured at a supply pressure of 5 bar, at a distance of 1m and at an angle of 45° from the axis of the silencer, averages 28 dB depending on the size. Material: nickel-plated brass, nickel-plated sintered bronze. Operating temperature: from -10°C to +80°C. Working pressure: 12 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLightweight, highly flexible hose used in pneumatic systems, hydraulic systems, tool lines, industrial robots, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Maintains flexibility at low temperatures. Shore hardness (A): 95°. Available in natural and blue colors. Hose material: polyurethane PUR. Working pressure: from 8 bar to 12 bar (depending on hose diameter). Operating temperature: from -40°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVery flexible, abrasion-resistant, tear-resistant, and kink-resistant spiral hose designed for pneumatic control systems, hand tools, industrial robots, etc. Finished on both ends with straight sections of 100 mm and 500 mm and ends with external BSPT threads. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyurethane PUR. Working pressure: up to 14 bar (depending on hose diameter). Operating temperature: from -40°C to +75°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRFL L type U throttling check valve (plug-in connection at the inlet and outlet of the valve) regulates the flow of air in one direction. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSPT type B1 external thread connection with a cutting ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSPT type C1 external threaded socket coupling designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality 90° angled connection with external BSPT thread, made entirely of AISI 316L steel, series 60110. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic, and medical industries. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRotary elbow, screw-in with external cylindrical thread, series F type R 31 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, coated with nickel in a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Material: nickel-plated brass. Seal: Viton (approved for food contact by FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdjustable angled plug connector with external thread, type R31, designed for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle body of the BANJO connector with a type D5 socket connection, intended for hoses made of soft plastics. The connection is made by inserting the hose onto the fitting and tightening it by screwing on the nut. The angle body of the BANJO connector allows for positioning the connector in the desired orientation. Through bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal pressure gauge mounted to reducers of types SYNTESI, BIT, SKILLAIR, and NEW DEAL with a square dial. The measurement range should be selected appropriately to the working pressure so that it does not exceed 75% of the maximum range. Scale expressed in bars and PSI. Size: 1/8". Operating temperature: up to +50°C. Dial diameter: 40x40 mm. Measurement range: 0 ÷ 4 or 0 ÷ 12 bar. Housing material: plastic. Dial material: aluminum. Filling: none (dry gauge).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStainless steel coupling type 62300 with internal BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProduced from high-quality ether-based raw material, maintaining flexibility over a long period, a spiral hose suitable for operation in harsh industrial conditions. It has shape memory, ensuring that after many years of use, the coil diameter remains unchanged. Excellent for applications requiring hoses resistant to abrasion, brittleness, and adverse weather conditions. Equipped with swivel couplings to eliminate longitudinal stresses in the hoses during use. Finished on both ends with straight sections of 100 mm and 500 mm, and ends reinforced with a quick coupling and a 26KA plug, with a reinforcing spring. The working length is 80-90% of the total length of the hose. Hose material: light blue polyurethane PUR. Working pressure: up to 12 bar (depending on hose diameter). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSTOP button with VRM-065 R lock for VME valve. Color: red. VME1-000 Adapter required for installation.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsT-shaped "T" fitting with internal BSP thread type A11 designed for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers are required. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFlexible and lightweight polyamide hose, intended for pneumatic, oil, fuel, and hydraulic installations, resistant to chemicals and lubricants. It has a calibrated outer diameter, allowing for the use of plug couplings, which significantly shortens and facilitates its installation. Compliant with DIN 73378 standard. Available in colors: yellow, orange, red, blue, green, natural, and black. Hose material: polyamide PA 12 (nylon). Working pressure: from 16 bar to 49 bar, depending on the diameter and wall thickness of the hose. Operating temperature: from -55°C to +100°C (for water-based media +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVSR L type quick release valve with both ends fitted with plug couplings (hose - hose), silenced discharge using an integrated silencer. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElbow fitting for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled connection with external BSPT thread type B5 with a locking ring designed for connecting copper pipes and plastic hoses. When connecting to hoses, the use of reinforcing sleeves (B12) is recommended. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSocket connector with external thread type C1/Z designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality 90° angled connection with external parallel thread (BSP or M5), made entirely of AISI 316L stainless steel, series 60115. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight connector with external cylindrical thread, series F type R 1 NSF. Designed for the food industry (e.g., for cold or hot drinking water). No plastic components, nickel plating through a special chemical process, and seals made of Viton ensure high resistance to detergents and other chemicals. Also suitable for various applications in the chemical, pharmaceutical, electronic industries, and in medicine. Material: nickel-plated brass. Operating temperature: from -20°C to +150°C. Working pressure: 16 bar. Vacuum: 0.99 bar. Seal: Viton (approved for food contact by the FDA). Standards: NSF/ANSI 51, NSF/ANSI 61.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector with external thread, type R1, intended for connecting wires and other components in pneumatic systems. Easy and quick to use for multiple assemblies without loss of sealing on the mechanical and pneumatic sides. Material: nickel-plated brass. Working pressure: 16 bar. Working medium: vacuum, air. Operating temperature: from -20°C to +80°C. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction adapter made of stainless steel type 62040 with external BSPT thread and internal BSP thread. Material: AISI 316L steel. Operating temperature: from -20°C to +225°C. Working pressure: 140 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCoil 22 mm for valves of series 70 with sizes 1/8" and 1/4", plunger O8. Insulation class: F155. Voltage tolerance: -10% to +15%. Protection degree: IP65 DIN 40050 with connector. Compliant with ATEX 94/9 CE, group II, category 3GD.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe hexagonal adapter made of nickel-plated brass is used to connect individual elements at the input/output (modules) of the Syntesi® system type SY1 or SY2 (both with each other and with the pneumatic installation), which can be easily disassembled using two screws. Adapter material: nickel-plated brass. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose end with external thread type A19, intended for connecting pneumatic components. Material: nickel-plated brass. Working pressure: 60 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle body of BANJO coupling with internal BSP thread type D12. Through bolts for the body: D7, D8, D9, D10. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFitting - tee for the SPEEDFIT system used in compressed air installations. The installation can be made using plastic or metal pipes (copper, brass, aluminum). Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReinforcing sleeve type B12 recommended for connecting plastic hoses to couplings with a locking ring of series B. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLight and flexible hose with calibrated outer diameter, intended for pneumatic, hydraulic, oil, fuel, lubrication, and chemical installations. Resistant to water and oil-laden air. Hose with enhanced resistance, according to DIN 73378 standard (P-plasticized, H-thermally stable, L-UV resistant). Standards and requirements: compliant with DIN 74324 standards for pneumatic braking systems of road vehicles and DIN 73378 for polyamide hoses used in road vehicles. In case of operation at elevated temperatures, pressure drop must be considered along with temperature. Available in colors: natural, black, blue, green, red, and yellow. Hose material: polyamide PA 12 (nylon). Working pressure: from 12 bar to 44 bar (depending on hose diameter and wall thickness). Working pressure dependent on temperature. Operating temperature: from -40°C to +80°C (for water-based media +70°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpiral hose intended for pneumatic control systems, hand tools, industrial robots, etc. Finished on both ends with a straight section of 100 mm in length and external BSPT threaded ends. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyamide PA 11/12 (nylon). Working pressure: up to 27 bar (depending on the diameter and wall thickness of the hose). Operating temperature: from -40°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRFL L type U throttling and check valve (threaded connection with an O-ring at the inlet and a plug connection at the outlet, to the actuator) regulates the flow of air passing in one direction. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angled socket coupling with GZ BSPT type C5 designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight plug connector with external BSP thread, series S, type PCM. Economic solution for connecting flexible pneumatic hoses with metric and imperial calibrated outer diameters. Easy and quick to use. Material: plastic. Working pressure: 10 bar. Vacuum: 0.99 bar. Operating temperature: from 0°C to +60°C. Sealing: NBR.
