Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Vacuum resistance
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsMRF N/C throttling and check valve for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a control knob and/or screwdriver; possibility of securing the setting with a locking nut. The specified nominal flow at a pressure of 6.3 bar (in the throttled direction). Operating pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Body material: nickel-plated brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF/C for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver. The specified nominal flow at a pressure of 6.3 bar (in the throttled direction). Body material: nickel-plated brass. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF/V for installation in the connections of distribution valves, used in pneumatic systems to regulate the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver. The specified nominal flow at a pressure of 6.3 bar (in the throttled direction). Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Body material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle-return valve type MRF PTC series PUSH-LOCK for direct mounting in actuator connections, used in pneumatic systems for regulating the flow rate of compressed air and the direction of flow. Equipped with a plug-in coupling for easy disassembly of pneumatic hoses. Adjustment change via a knob with PUSH-LOCK lock. Size: 1/8″, 1/4″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +50°C. Material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle valve type MRF OMB series COMPACT "O" used for simultaneous flow regulation in both directions - during filling and venting, applied in pneumatic systems for regulating the flow rate of compressed air. Equipped with a plug-in connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver, with the possibility of mounting a protective cover. Size: M5, 1/8″, 1/4″, 3/8″, 1/2″. Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThrottle valve type MRF/B used for simultaneous flow regulation in both directions - during filling and venting, used in pneumatic systems to regulate the flow rate of compressed air. Equipped with a plug connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver. The specified nominal flow at a pressure of 6.3 bar (in the throttled direction). Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Body material: nickel-plated brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMRF T/B type throttling valve used for simultaneous flow regulation in both directions - during filling and venting, applied in pneumatic systems to regulate the flow rate of compressed air. Equipped with a plug-in connection for easy disassembly of pneumatic hoses. Adjustment change using a screwdriver. The specified nominal flow at a pressure of 6.3 bar (in the throttled direction). Working pressure: up to 10 bar. Operating temperature: from -10°C to +70°C. Body material: plastic.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe soft start valve is used to fill the working system with compressed air, operating in a two-stage manner. The application of a control signal causes the shut-off valve to open and air to flow through the throttling valve. Once the output pressure reaches approximately 40 to 60% of the supply pressure, the valve is overridden, allowing air to flow through the full cross-section from the inlet to the outlet. Removing the control signal causes the supply valve to close and the working system to vent. The soft start valve is used in installations where there is a need to protect powered actuators from sudden aeration, which can generate shock loads affecting the structural elements of machines. Excessive air intake from the outlet during the initial aeration of the working system can disrupt the operation of the valve, preventing it from fully opening. Size: SY1, SY2. Connection: BSP 1/8" to 1". Supply pressure: 3 - 10 bar. Additional outlet connection: BSP 1/8" for size SY1, BSP 1/4" for size SY2, at the front and rear. Operating temperature: from -10°C to +50°C. Nominal flow: depending on size from 1250 l/min to 4800 l/min (at pressure 6.3 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft start valve, used for the safe introduction of air into the pneumatic system, protecting actuators from sudden pressure increases. In the version with electric control, without pilot pressure, air flows from the inlet connection to the outlet through a needle valve. Upon receiving an external control signal, electrical, the valve is overridden and air flows through the full cross-section of the valve. The valve does not vent the pneumatic system. Size: 100. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Flow: 2000 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSoft start valve, used for the safe introduction of air into the pneumatic system, protecting actuators from sudden pressure increases. STD valve: opens automatically when the outlet pressure reaches approximately 50% of the inlet pressure. Pneumatic control valve: without pilot pressure, air flows from the inlet connection to the outlet through a needle valve. Upon receiving an external control signal, pneumatic, the valve is overridden and air flows through the full cross-section of the valve. The valve does not vent the pneumatic system. Size: 100. Supply pressure: up to 15 bar. Operating temperature: up to +50°C. Flow: 2000 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSimple, monostable foot valve without protective cover with ports in the front plane. This type of valve is used for foot control by the operator of devices in pneumatic systems. Connection: M5, Ø4. Working pressure: from 2.5 bar to 10 bar. Operating temperature: -10°C to +60°C. Nominal flow: 95 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V, NEW DEAL series, separates the working system from the supply air. It features a triple locking mechanism, and the valve opens by pressing a button. The mushroom system used ensures high flow rates. Connection: GW BSP 1/4" to 1/2". Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Nominal flow: 1500 l/min for 1/4" connection, 2900 l/min for 3/8" and 1/2" connections (at an inlet pressure of 6 bar and Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsElectric shut-off valve V3V, SKILLAIR® series, with end plates, is used to separate the working system from the supply air. It is a normally closed, three-way valve. In the closed position, it cuts off the supply air while simultaneously venting the system, making it particularly useful during maintenance work. Size: 100, 200. Supply pressure: up to 10 bar. Operating temperature: up to +50°C. Connection: GW BSP 1/4" to 3/8". Flow rate: 1650 l/min (at inlet pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with threaded connection with an O-ring on one side and a plug connection on the other side (thread - hose). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with threaded connection with an O-ring on one side and a plug connection on the other side (thread - hose). Lockable version, protects against unauthorized opening. Supplied complete with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread). Padlock version, protects against unauthorized opening. Supplied with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV2V L type shut-off valve, two-position, two-way, with both ends equipped with plug-in couplings (hose to hose). Lockable version, protects against unauthorized access. Supplied complete with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread). Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version with a threaded connection with an O-ring on one side and a plug-in connection on the other side (thread - hose). Lockable version, protects against unauthorized opening. Supplied complete with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsV3V L type shut-off valve, two-position three-way, with pneumatic system venting, in a version with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread). Lockable version, protects against unauthorized opening. Supplied complete with a padlock and two keys. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsManual shut-off valve V3V with lock, SKILLAIR® series, with end plates. Its purpose is to separate the working system from the supply air. It is a normally closed, three-way valve. In the closed position, it cuts off the supply air while simultaneously venting the system, making it particularly useful during maintenance work. In the resting position (closed), it can be locked with a padlock, which secures the valve against activation by unauthorized persons. Size: 100, 200, 300. Supply pressure: up to 15 bar (depending on size). Operating temperature: up to +50°C. Nominal flow: depending on size up to 4700 l/min (at an inlet pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVSR L type quick release valve in a version with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread), discharge conducted through the plug connection. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick exhaust valve with VSRR L throttling adjustment version with a plug-in connection on one side and a threaded connection with an O-ring on the other side (hose - thread), with the ability to adjust the exhaust air flow, allowing for increased actuator speed. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsVSR L type quick release valve with a plug connection on one side and a threaded connection with an O-ring on the other side (hose - thread), silenced discharge using an integrated silencer. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or un-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPrecision pressure reducing valve series GS with quick venting, designed to maintain a set pressure at a constant level and to quickly discharge any excess pressure from the pneumatic system. Intended for applications requiring high accuracy, e.g., for use with actuators with a reduced friction coefficient typically used as pneumatic springs with a constant characteristic. High flow through the valve during aeration and venting of the system and high setting precision are ensured by two identical and opposing regulating valves, separate for the supply and outlet connections. Installation in the system is done using mounting brackets or directly, using mounting holes located in the valve body. Output pressure range: 0÷2, 0÷4, 0÷8 bar. Supply pressure: up to 10 bar. Working medium: filtered 10 µm compressed air, non-oiled. Drain valve sensitivity: 30 mbar. Operating temperature: from -10°C to +50°C. Connection: BSP 1/8" and 1/4". Additional connection for pressure gauge: BSP 1/8". Flow: 1200 l/min - 1/8", 1380 l/min - 1/4" (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPiston-type pressure reducing valve RP, characterized by resistance to harsh working conditions, remotely controlled by external pressure (pilot), intended for the NEW DEAL series. Possibility of wall mounting using holes in the body. Size: 3/8", 1/2". Output pressure range: dependent on the pilot controlling the reducer. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: BSP female thread 3/8", 1/2". Pressure gauge connection: BSP female thread 1/8". Flow rate: 4500 l/min (at input pressure of 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-pressure piston-type pressure reducing valve with manometer, used for regulating working pressure and ensuring proper operation in the connected installation, regardless of changing medium consumption. Size: DN12. Housing material: brass. Output pressure range: 0.5÷12, 1÷20, 2÷35, 3÷50 bar. Supply pressure: up to 60 bar. Operating temperature: from -10°C to +90°C. Connection: BSP 1/4", 3/8". Manometer dial diameter: Ø63. Flow rate: 2000 l/min - 1/4", 2500 l/min - 3/8" (at input pressure 20 bar Δp = 4 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsREG pressure reducing valve, SKILLAIR® series, without end plates, is used for regulating operating pressure, ensuring proper device operation. Size: 100, 200, 300. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar (13 bar - size 200, 300). Operating temperature: up to +50°C. Connection: BSP 1/4" to 1". Pressure gauge connection: BSP 1/8". Flow rate: 1600 l/min - series 100, 3500 l/min - series 200, 7000 l/min - series 300 (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulating valve with lock REG type piston, characterized by resistance to harsh working conditions, intended for the NEW DEAL series. Possibility of wall mounting using holes in the body. It has a stem with a hole located in the upper part of the adjusting knob. When the knob is in the locked position, there is an option to place a padlock in the hole, preventing changes to the reducer settings. The set includes a padlock and 2 keys. Size: 3/8", 1/2". Output pressure range: 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 18 bar. Operating temperature: up to +50°C. Connection: GW BSP 3/8", 1/2". Pressure gauge connection: GW BSP 1/8". Flow: 2500 l/min (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRegulating valve in cartridge version for direct installation in the device or for block mounting with common supply and various settings of output air pressure. Output pressure range: 1 ÷ 8 bar. Working pressure: 10 bar. Operating temperature: from -20°C to +60°C. Medium: filtered compressed air, oiled or non-oiled.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeries REG pressure reducing valve, SYNTESI® series, without end connections, is used to regulate working pressure and maintain it at a constant level, ensuring proper operation in the connected installation, regardless of the changing consumption of the medium. The valve uses a shaped diaphragm instead of a flat diaphragm, which provides higher nominal flow values due to a greater diaphragm stroke, as well as greater sensitivity and response speed to changes in settings, by reducing static and kinetic friction of components and increasing accuracy in maintaining the set output pressure with changes in flow and supply pressure values. The "push-lock" mechanism allows the knob to be locked in any position by pressing it. The locking plate enables the installation of a padlock to prevent unauthorized changes to the output pressure setting. They are designed to draw air from connections at the front and back of the body, which can be used to connect a pressure gauge, pneumatic-electric relay, or plug couplings, with direct connection of input and output connections. This allows for the installation of any number of pressure reducing valves next to each other, supplied from a single source, independently adjustable. Size: SY1, SY2. Output pressure range: 0÷2, 0÷4, 0÷8, 0÷12 bar. Supply pressure: up to 15 bar, depending on size. Operating temperature: from -10°C to +50°C. Additional connection for pressure gauge or couplings: BSP 1/8" for size SY1, BSP 1/4" for size SY2. Flow: 500 l/min - size SY1, 1000 l/min - size SY2 (at input pressure 6 bar Δp = 1 bar).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), without control coil, most commonly used for controlling actuator operation. It can be mounted inline, to a wall, directly to actuators, or on a connection block. Function 3/2 - three-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal electric control distribution valve (solenoid valve), with a control coil, for panel mounting. Panel mounting reduces the number of necessary wires, dampers, and connections, which lowers costs and increases reliability. This is an ideal solution wherever there is a need to replace the valve without the possibility of disconnecting the wires. The inlet, outlet, and vent are located on the connection plate. Function 5/2 - five-way, two-position. Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Operating pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, lever with pivot roller, most commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal directional control valve with mechanical actuation, lever with pivot roller, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal dividing valve with mechanical control, lever with roller assistance, commonly used for controlling actuator operation. Can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve with a push rod assist, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve with actuator assistance, commonly used for controlling the operation of actuators. It can be mounted in any position. Function 5/2 - five-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal mechanical control distribution valve, operated by a push rod, commonly used for controlling actuator operation. Can be mounted in any position. Function 3/2 - three-way, two-position. Size: 1/8". Material: valve body - aluminum, slider - nickel-plated aluminum, sealing - NBR, end cover - plastic. Working pressure: up to 10 bar. Operating temperature: -10°C to +60°C.
