Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction plug of FERRARI lever connector with hose end, type F.11, for use in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, sewage treatment, wastewater disposal, environmental protection. Material: carbon steel, galvanized. Operating temperature: from -20°C to +50°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling plug with valve and internal UNF thread. The couplings are available in two versions: for gases type HB-2KG... and for liquids type HB-2KL.... These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with hose end, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and securing sleeve, it has a very low weight. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotations of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic installations, and non-freezing liquids, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 4.2 bar. Operating temperature: from 0°C to +71°C.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external threaded plug with hexagon for key, intended for cold and hot water. Material: brass. Working pressure: 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK F connector plug with external BSPT or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Both versions meet all required parameters and come from reputable suppliers. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gate valve type 2000 with metal-metal sealing and non-rising stem, intended for industrial installations. Allows for regulation or throttling at low flow rates. Maximum constant working pressure across the full temperature range. Body material: brass. Disc material: brass. Handle material: carbon steel. Stem sealing: EPDM. Connection: BSP female thread. Operating temperature: from -10°C to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with internal trapezoidal thread compliant with DIN EN 12713 standard and external BSP or BSPT thread. The trapezoidal threads, which are standardly equipped on IBC connectors, are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLoading coupling socket TW type MK with internal BSP thread. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Designed for liquids, bulk materials, and gases (except liquefied gas and vapor). Material: brass. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). coupling sealing (seal type GSD, for 4" type TWO): NBR. Thread sealing (seal type GD): polyurethane.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC adaptor compliant with DIN EN 12713 standard - internal trapezoidal thread to external thread. The trapezoidal threads, which are standardly equipped in IBC connections, are 100% compatible with the threads in IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 1/2" with external thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket NiTO made of AISI 316L stainless steel with internal BSP thread and shut-off valve. Available in two systems: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of elements from different systems is not allowed, e.g., 1/2″ socket with 3/4″ plug. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect socket with external NPT thread, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional heavy-duty couplings with balls and protective sleeves, it has a very low weight. The ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotations of the connected hose, preventing twisting and accidental disconnection. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic systems, and non-freezing liquids, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 4.2 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStraight BANJO fitting type RS, similar to DIN 7642, intended for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with an external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNW type end fitting for welding made of carbon steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type A with internal BSP thread and flat sealing, knurled nut. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp designed for securing hoses on standard ends (smooth) with a securing flange. Material: clamps - brass, screws and nuts - galvanized carbon steel. Working pressure 25 bar (with appropriately selected hose and end EN 14420-3).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand clamp with a worm drive equipped with a spring for compensating dimensional changes in the connection (shrinkage of the hose due to cold flow of the material or due to large temperature variations). The spring consists of a set of 8 disc springs (washer springs) – washers under the head of the screw. This ensures the retention of the clamp's grip and sealing around the entire circumference of the hose, preventing leaks from the installation. The spring mechanism of the clamp allows for automatic adjustment of its diameter while maintaining the clamp's grip. Particularly recommended in cases of large temperature changes. Proper clamping of the clamp is indicated by the screw end protruding beyond the housing of the lock and the flattened disc springs. The internal insert of the clamp protects the hose surface from damage. Installation tightening torque 5.6 Nm (max. 9.6 Nm). Screw/lock material: stainless steel 410. Band material: stainless steel 300. Band width: 14.3 mm (9/16").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdBlue® and water dispensing gun type 223X made of polyamide with a flow rate of 60 l/min. Standardly equipped with a ribbed nozzle for a 1" hose. Does not have an automatic shut-off system for the medium. Not intended for diesel fuel or unleaded gasoline. Outlet diameter: 18 mm. Material: glass fiber reinforced polyamide. Color: blue. Flow rate: 60 l/min. Swivel connection: no.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMB cover, without chain, for TW loading connections. Used for VK (male) parts, serves as a pressure-resistant plug. Material: AISI 316 steel. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Seal type TWF, seal material: hypalon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLDR, LD, LR type sleeves are designed for clamping hygienic stainless steel ends (with a corrugated tail) type NH-xxK-xxx and ends with a tail for hose under a shell clamp RS, e.g., TW-KRS-xxx, NH-xxR-xxx in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral - suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L may be slightly (a few mm) greater than the length of the tail of the end Lk. LR sleeves - only for ends under the shell clamp, LD - only for ends with a corrugated tail, LDR - sleeves for both types of ends. Diameter D1 [mm] - external diameter. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - locking diameter. Material: galvanized carbon steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsOversized gasket, type F.4, intended for the socket of the FERRARI coupling. Material: SBR/NR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass reinforcing insert used for flexible hoses for AI 13000 type couplings. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector plug with external BSP thread, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPlug cap for CAMLOCK DC coupling made according to the American military standard MIL-C-27487 (A-A-59326). Working pressure: up to 10 bar, depending on the size of the coupling. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter with internal metric thread and CAMLOCK A type plug, with gasket, for use in, for example, railway tankers. Material: aluminum. Sealing: NBR. Working pressure: 6 bar. Operating temperature: from -20°C to +30°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket with hose end, with valve and without shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and securing sleeve, it has a very low weight. Ergonomic shape and large disconnect button enhance manipulation comfort and ease of use. Very efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic installations, and non-freezing liquids, etc. Length L [mm] - total length. Material: polypropylene. Sealing: EPDM o-ring. Working pressure: up to 4.2 bar. Operating temperature: from 0°C to +71°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 1/2" with internal thread and shut-off valve. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils). For valve O-ring with EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling socket with internal NPT thread. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK B connector socket with external BSPT or NPT thread, manufactured according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector socket with "tail" for hose with wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granules, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of seal material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNW type end fitting for welding made of AISI 304 steel with a "tail" for hoses. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP external thread fitting, internal cone 45°. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsWelding stub, type WRS, for flange EN 1092-1 PN16 for installation with RS shell clamp or for tightening with TI-LR, TI-LDR sleeve. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUM type nut with metric or BSP thread, similar to DIN 3870, for S and SF type fittings. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsAngle fitting with external BSPT thread type AI 13280 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by compressing the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP threaded tee for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsO-ring seal, type F.3, designed for the FERRARI connector socket. Material: SBR/NR rubber.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfile gasket for TW (tank truck) connection type GSD (for 4" connection, O-ring gasket type TWO is used). Material: hypalon (SCM). Temperature range (approximate): from -20°C to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug NiTO made of AISI 316L stainless steel with internal BSP thread. Available in two systems: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., a 1/2″ socket with a 3/4″ plug. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
