Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLDR, LD, LR type sleeves are designed for clamping hygienic stainless steel ends (with a corrugated tail) type NH-xxK-xxx and ends with a tail for hose under a shell clamp RS, e.g., TW-KRS-xxx, NH-xxR-xxx in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral - suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L may be slightly (a few mm) greater than the length of the tail of the end Lk. LR sleeves - only for ends under the shell clamp, LD - only for ends with a corrugated tail, LDR - sleeves for both types of ends. Diameter D1 [mm] - external diameter. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - locking diameter. Material: AISI 304 steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK A connector plug with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector plug with a weldable connection for wide applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. Material: AISI 316 steel. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector plug PERROT with a flared end for hose with wide applications, including in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Working pressure: up to 10 bar (up to 8 bar for size 216 mm).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong screw clamp with a hinged closure for heavy loads features a durable construction and two full pins. Recommended for tight connections of thick-walled, reinforced industrial hoses. The clamp is made from high-quality steel band with a width ranging from 18 mm to 26 mm. The rolled edges of the band prevent damage to the surface of the hose on which the clamp operates. The clamp has markings on the band indicating the minimum and maximum diameter as well as the material from which it is made. Thanks to the hexagonal head of the screw, commonly used tools such as flat wrenches, socket wrenches, and adjustable wrenches can be utilized. Material: all components made of galvanized steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with internal trapezoidal thread compliant with DIN EN 12713 standard and CAMLOCK A (plug) connection. The trapezoidal threads standardly equipped in IBC connectors are 100% compatible with the threads in IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLoading connection socket TW type MK with internal BSP thread. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Designed for liquids, bulk materials, and gases (except liquefied gas and vapor). Material: AISI 316 steel. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Joint sealing (seal type GSD, for 4" type TWO): hypalon. Thread sealing (seal type GD): teflon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReducing fitting with external BSPT thread and internal BSP thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsReduction socket of lever connector FERRARI with hose end, type F.10, for use in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, sewage treatment, wastewater disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket DN11.8 with internal thread facilitating quick connection of the water gun to the hose or other washing accessories. Material: AISI 303/304L steel. Sealing: viton. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 1/2" with internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK D connector socket with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass hose end, NiTO type A with internal BSP thread and flat sealing, hexagonal nut. Material: brass. Working pressure: 25 bar. Operating temperature: up to +80°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCNP type end with external tapered BSPT thread made of AISI 304 steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: AISI 304 steel.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdapter nipple with external BSPT threads on both sides for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp according to EN 14420-3 (DIN 2817) designed for securing hoses at ends with a safety flange. DN - internal diameter of the hose x wall thickness of the hose. Material: AISI 316 steel. Working pressure: 25 bar (with appropriately selected hose and end EN 14420-3).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsThree-part clamp according to DIN 20039 B, with hooks ("claws") on the flange to secure the ends and with separate inserts - "tongues" for pressing. Material: ductile cast iron galvanized. With proper installation, appropriately selected hose and fitting, working pressure up to 25 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFilling gun type 222 made of glass fiber reinforced polypropylene intended for diesel fuel. Standardly equipped with a rotating connection GW 1" BSP, which prevents hose twisting. It does not have an automatic fuel shut-off system, therefore it is not suitable for use with dispensers at fuel stations. Not intended for AdBlue® or unleaded gasoline. Outlet diameter: 25 mm. Material: glass fiber reinforced polypropylene. Color: black. Flow rate: 60 ÷ 80 l/min. Rotating connection: yes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsH-type crimping sleeve used for clamping hoses on ends without a locking mechanism connecting the sleeve to the end. It can also be used on NiTO ends and quick coupling ends. Low-pressure hoses up to approximately 30 bar (depending on diameter) made from various materials can be used with crimping sleeves, provided that the hose material is sufficiently soft for this type of clamp. Primarily rubber hoses with textile reinforcement and PVC hoses. There is also the possibility of crimping hoses with a steel braid (e.g., type PZ hose). The internal diameter of the sleeve should be selected according to the external diameter of the hose, while ensuring that the diameter of the hole at the front of the sleeve matches the used end. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - hole diameter. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-type sleeve designed for crimping hydraulic type ends (ends for high-pressure hoses type Z) in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral - suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L should not exceed the length of the tail of the end Lk. Diameter D1 [mm] - external diameter. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - locking diameter. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality general-purpose worm clamp designed for quick and easy fastening of industrial hoses, entirely made of AISI 316 stainless steel, recommended for use in the food, chemical, marine industries, etc. Manufactured in accordance with the requirements of DIN 3017 standard and RoHS directive 2002/95/EC. The ASFA-S clamp with a band width of 12 mm features greater strength and a higher permissible tightening torque than the ASFA-L clamp (9 mm), ensuring a stronger grip and is recommended for heavier applications. The unique worm mechanism in a compact housing and the cold-extruded thread in the band, smooth on the inside, provide a reliable multiple clamping of the clamp without damaging the hose surface. Material: AISI 316 stainless steel (W4).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for IBC connection for pallet containers with trapezoidal thread (o-ring for S60x6, above flat seal). Material: EPDM, LDPE, PTFE, viton or Santopren.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal of the ANFOR lever coupling socket. Material: NR/SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect plug for hose with nut and valve is intended for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal (o-ring NBR). Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsUniversal gate valve type 2010 with metal-metal sealing and non-rising stem, intended for industrial installations. Allows for regulation or throttling at low flow rates. Maximum constant working pressure across the full temperature range. Body material: brass. Disc material: brass. Handle material: carbon steel. Stem sealing: EPDM (1/2" ÷ 1.1/2"), NBR (2" ÷ 6"). Connection: BSP thread. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTW type VK loading coupling plug with internal BSP thread. Designed for installation on hose ends or piping systems with external BSP thread. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Intended for liquids, bulk materials, and gases (except liquefied gas and vapor). Material: AISI 316 steel. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Thread sealing (seal type GD): Teflon.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTee fitting "T" type AI 13200 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling socket NiTO made of AISI 316L stainless steel with a hose end. Available in two systems: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of elements from different systems is not allowed, e.g., 1/2″ socket with 3/4″ plug. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector socket ANFOR with PN 10 flange for use in agricultural farms, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on connector size). Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever connector socket with external BSP thread, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: carbon steel, galvanized. Sealing: SBR. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsEnd fitting with fixed nut and internal BSP thread. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCND corrugated connector intended for rubber and plastic industrial hoses made of AISI 304 steel. Designed for assembly using straps or clamps. For multiple assembly and disassembly. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBrass straight connector type AI 13460 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic (e.g., polyamide) pipes and hoses. The range of external diameters of connected pipes is from 4 to 22 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP internal threaded coupling for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLN type soldering nipple, spherical, sealing cone 60°, similar to DIN 7608. Use nut type UM (EC- 105…). Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsShell clamp according to EN 14420-3 (DIN 2817) intended for securing hoses at ends with a safety flange. DN - internal diameter of the hose x wall thickness of the hose. Material: clamps - aluminum, screws and nuts - galvanized carbon steel. Working pressure: 25 bar (with appropriately selected hose and end EN 14420-3).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsTwo-part clamp with integrated, cast pressure "tongues." The clamp is designed for mounting ends and connections with a hose part ("tail") without a lock (safety flange), made of high-quality ductile cast iron, galvanized (with yellow passivation free of hexavalent chromium). Material: galvanized ductile cast iron. With proper installation, appropriately selected hose, and end fitting, working pressure up to 16 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRight-hand bridge worm clamp with a band width of 9 and 12 mm designed for quick and easy multiple fastening of hoses reinforced with a steel spiral, e.g., ventilation hoses. The purpose of the bridge is to encompass the spiral wire and ensure a precise fit of the clamp to the hose. The use of the bridge in the clamp provides a tight and non-damaging connection to the hose. The right-hand OMP clamp is intended for mounting typical spiral suction hoses with a right-wound wire spiral, e.g., P1PU, P2PU, P3PU, P7PU, SMARTFLEX. The unique worm mechanism of the clamp in a compact housing and the cold-extruded thread in the band, smooth on the inside, ensure a secure multiple clamping without damaging the hose surface. The number of segments depends on the minimum/maximum diameter of the clamp. Material: AISI 430 steel (screw made of galvanized steel).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFuel dispensing gun type 223 made of aluminum with a flow rate of 60 ÷ 120 l/min, intended for diesel fuel. Standardly equipped with a swivel connection GW 1" BSP, which prevents hose twisting. It does not have an automatic fuel shut-off system, therefore it is not suitable for use with dispensers at fuel stations. Not intended for AdBlue® or unleaded gasoline. Outlet diameter: 25 mm. Material: aluminum. Color: silver. Flow rate: 60 ÷ 120 l/min. Swivel connection: yes.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsL-type sleeve designed for crimping hydraulic type ends (ends for high-pressure hoses type Z) in industrial hoses (rubber and plastic with textile reinforcement, possibly with a reinforcing spiral - suction and pressure hoses). The sleeve should be selected considering the internal diameter Dw and external diameter Dz of the hose. The length of the sleeve L should not exceed the length of the tail of the end Lk. Diameter D1 [mm] - external diameter. Diameter D2 [mm] - internal diameter. Diameter D3 [mm] - locking diameter. Material: AISI 316 steel.
