Our products
Product categories
Working pressure [bar]
Minimum operating temperature [°C]
Maximum operating temperature [°C]
Material
Standard length [m]
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStrong two-bolt clamp with double band and joint closure for heavy loads. Two screws and full pins ensure a precise and tight connection between the hose and the fitting. Recommended for connections of thick-walled, reinforced industrial hoses. The clamp is made of high-quality steel band with a width of 20 mm and 24 mm. The rolled edges of the bridges prevent damage to the hose surface. The clamp features markings on the band for minimum and maximum diameter as well as material. Tightening of screws is done using an Allen key. All components are made of AISI 316 steel.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector on both sides with internal trapezoidal thread compliant with DIN EN 12713 standard. The trapezoidal threads, which are standardly equipped in IBC connectors, are 100% compatible with the threads in IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsNiTO SC quick coupling socket, with disconnection protection, with hose end. For use with hot water (above +60°C) in installation areas where it is used directly by the operator and frequently disconnected. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +150°C. Sealing: viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling socket with valve and seal with external thread UNF 11/16″-18. The couplings are available in two versions: for gases type 2HG and for liquids type 2HL. These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK C connector socket with a ribbed hose end made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: aluminum. Levers: AISI 304 steel (in sizes 1.1/4" to 4" - levers made of brass). Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHose end with external BSP thread for use in industrial installations, e.g., for air. Material: brass. Working pressure: up to 12 bar. Operating temperature: from -20°C to +100°C.
Select options This product has multiple variants. The options may be chosen on the product page / DetailsSA type end fitting with external BSP thread, 60° cone sealing, designed for low-pressure rubber and non-reinforced plastic hoses as well as those with textile reinforcement, with external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air installations, etc. Material: brass.- Select options This product has multiple variants. The options may be chosen on the product page / DetailsType CNP end with external tapered BSPT thread made of AISI 316 steel with a "tail" for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: AISI 316 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsRailway nut HEAVY DUTY with seal, with metric thread, for hook wrench. Material: aluminum. Sealing: NBR. Working pressure: 6 bar. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBand clamp with a worm drive equipped with a spring for compensating dimensional changes in the connection (shrinkage of the hose due to cold flow of the material or due to large temperature fluctuations). The spring consists of a set of 10 disc springs (washer springs) – washers under the head of the screw. This ensures the maintenance of the clamp's grip and sealing around the entire circumference of the hose, preventing leaks from the installation. The spring mechanism of the clamp allows for automatic adjustment of its diameter while maintaining the clamp's grip. Particularly recommended in cases of large temperature changes for heavier applications. Proper clamping of the clamp is indicated by the screw end protruding beyond the housing of the lock and the flattened disc springs. The internal insert of the clamp protects the hose surface from damage. Installation tightening torque 8.5 Nm (max. 14.1 Nm). Screw/lock material: stainless steel 410. Band material: stainless steel 300. Band width: 16 mm (5/8").
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsConnector - "T" fitting with internal BSPT thread type AI 13240 designed for connecting copper, brass, steel, aluminum pipes, etc., as well as plastic pipes and hoses (e.g., polyamide). The range of external diameters of connected pipes is from 4 to 18 mm. The tightness of the connection is achieved by crimping the ring on the connected pipe and simultaneously pressing the pipe with the ring into the socket using a nut. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsScrew fitting with internal BSP thread and external BSPT thread for use in piping connections of industrial installations. Sealing of the fitting cone (metal-metal). Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsProfile gasket for TW (tank truck) connection type GSD (for 4" connection, O-ring gasket type TWO is used). Material: viton (FPM). Temperature range (approximate): from -20°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug NiTO made of AISI 316L stainless steel with external BSP thread. Available in two systems: 1/2″ and 3/4″. Used in conditions with high hygiene and corrosion resistance requirements (e.g., food industry, hospitals). Direct connection of components from different systems is not allowed, e.g., a 1/2″ socket with a 3/4″ plug. Material: AISI 316L steel. Working pressure: 25 bar. Operating temperature: from -20°C to +150°C. Sealing material: Viton.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug with external BSPT thread and shut-off valve, intended for water, chemical, pneumatic installations, etc. Compared to traditional massive couplings with balls and protective sleeves, it has a very low weight. The highly efficient valve allows for high flow rates and minimal leakage. This coupling also allows for slight rotation of the connected hose, preventing twisting and accidental disconnection of the coupling. Applications: chemical photographic processes, battery and accumulator filling installations, sprayers, pneumatic installations, and non-freezing liquids, etc. It features high mechanical strength and chemical resistance. Suitable for autoclaving. Length L [mm] - total length. Material: polysulfone. Sealing: EPDM o-ring. Working pressure: up to 8.6 bar. Operating temperature: from -40°C to +138°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLever connector plug FERRARI with flange PN10, type F.46, for use in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector plug with external BSP thread, widely used for example: for the transfer and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Vacuum tightness.
- Select options This product has multiple variants. The options may be chosen on the product page / Details2" valve in "premium" version for pallet container made entirely of durable polypropylene, eliminating any occurrence of corrosion. Standardly equipped with a polyethylene (LDPE) seal, which has a very high resistance to chemical substances compared to standard rubber seals such as EPDM, NBR, or Viton. The valve is additionally equipped with a locking latch and a cap. Available outlet connection of the valve: external thread (trapezoidal, NPT) or CAMLOCK A fitting. Material: polypropylene. Seal: low-density polyethylene (LDPE). Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 1/2" with hose end and shut-off valve. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils). For valve O-ring with EPDM.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsCAMLOCK CRS connector socket with smooth hose end (for shell clamp) made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFerrari lever connector socket with external BSP thread, type F.14, for use in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLAUX 42 lever connector socket with a wide range of applications, e.g.: for the transport and unloading of bulk materials (grains, flours, feeds, granulates, cement, minerals), for pressure and vacuum pumps, for the construction of temporary water and air installations in construction, mining, agriculture, for irrigation systems. When selecting a connector for a medium other than water, attention should be paid to the correct selection of gasket material. The standard sealing is an EPDM gasket. Material: carbon steel, galvanized. Maximum working pressure: 12.5 bar (for liquids), 8 bar (for air). Tightness under vacuum. Operating temperature: from -50°C to +120°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsPERROT lever coupling socket with PN 10 flange, widely used in agricultural farms, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment plants, sewage discharge, and environmental protection. Material: carbon steel, galvanized. Sealing: SBR. Working pressure: up to 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with internal BSP thread for use in piping connections of industrial installations. Material: ductile iron. Operating temperature: up to +300°C. Working pressure: 25 bar (up to +120°C), 20 bar (up to +300°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsFixed flange PN16 type CNWF made of AISI 304 steel with a "tail" for hoses. Designed for rubber and plastic industrial hoses. Installation using straps or clamp bands. Material: AISI 304 steel.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSpherical end - insert under the nut. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsLocking ring for metric threaded nut type AI 13740 made of brass. Range of external diameters of connected pipes from 4 to 22 mm. Standard: EN 1254-2. Material: brass.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsMB cover, without chain, for TW loading connections. Used for VK (male) parts, serves as a pressure-resistant cap. Material: aluminum. Operating temperature: from -20°C to +65°C (consider medium and sealing material). Seal type TWF, seal material: NBR.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHS type BANJO screw with metric or BSP thread, similar to DIN 7643. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsBSP threaded fitting for use in pipe connections of industrial installations. Fitting seal: cone (metal-metal). Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality worm clamp for general use designed for quick and easy fastening of industrial hoses, entirely made of AISI 316 stainless steel, recommended for applications in the food, chemical, marine industries, etc. Manufactured in accordance with the requirements of DIN 3017 standard and RoHS directive 2002/95/EC. The ASFA-L clamp with a band width of 9 mm is recommended for standard applications. The unique worm mechanism in a compact housing and the cold-extruded thread in the band, smooth on the inside, ensure a secure multiple clamping of the clamp without damaging the hose surface. Material: AISI 316 stainless steel (W5).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsSeal for railway nut compatible only with KGW type end nuts. Material: NBR. Operating temperature: from -20°C to +70°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHansen Beverage quick coupling plug with valve and external NPT thread connection. The couplings are available in two versions: for gases type HB-2KG... and for liquids type HB-2KL.... These versions are not interchangeable (different plug diameter), which prevents connection errors. Identifying the version is very easy. For gas couplings, the identification ring on the socket is white, and the hexagon on the plug has a notch. For liquid couplings, the identification ring on the socket is black, and the hexagon on the plug does not have a notch. Working pressure: 15 bar. Operating temperature: up to +130°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick coupling plug DN11.8 with internal thread facilitating quick connection of the water gun to the hose or other washing accessories. Material: AISI 303/304L steel. Working pressure: 200 bar. Operating temperature: up to +100°C.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsIBC connector with internal trapezoidal thread compliant with DIN EN 12713 standard and CAMLOCK D (socket) connection. The trapezoidal threads standardly equipped on IBC connectors are 100% compatible with the threads on IBC containers from various manufacturers. Material: polypropylene. Seal: low-density polyethylene (LDPE). Working pressure: up to 7 bar. Operating temperature: from -10°C to +70°C (temporarily up to +80°C).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-quality quick-connect water socket NiTO 1" with internal thread. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasoline and oils).
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick-connect socket with external NPT thread and valve is designed for gas detection, medical devices, chemical analyzers, inkjet printing, as equipment for optical devices, etc. The characteristic design (not containing balls and a protective sleeve) allows for easier, secure connection and disconnection with one hand. The effectiveness of the connection is indicated by an audible click. Length L [mm] - total length. Material: acetal. Sealing: NBR. Working pressure: up to 8.3 bar. Operating temperature: from -40°C to +82°C.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° elbow with internal BSP thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar.
- Select options This product has multiple variants. The options may be chosen on the product page / Details90° angular fitting type RBU with nut, spherical, 60° cone sealing, designed for low-pressure rubber and non-reinforced and textile-reinforced plastic hoses, with external steel braid. Commonly used in flexible hoses for sanitary fittings, fuel systems, air systems, etc. Material: carbon steel, galvanized.
- Select options This product has multiple variants. The options may be chosen on the product page / DetailsHexagonal nut for spherical end - insert under the nut. Material: brass. Working pressure: 40 bar. Operating temperature: from -10°C to +90°C.
