Is the Short coupler with BSP female thread, stainless steel, type VT102 compatible with other BSP fittings and adapters under 10 bar working pressure?

Short coupler with BSP female thread, stainless steel, type VT102 should be compatible with other BSP fittings and adapters rated for the same thread type and a working pressure of up to 10 bar, because it uses standard internal BSP threading and is made of AISI 316 stainless steel. However, compatibility depends on three practical checks: - Thread type and size: ensure the mating part is the same BSP standard (BSPP or BSPT) and the exact nominal size. BSPP (parallel) and BSPT (tapered) are not interchangeable without an appropriate seal method. - Pressure rating: mating fittings/adapters must be rated for â¥10 bar working pressure to match the VT102âs 10 bar rating. - Dimensional/tolerance variations: manufacturer tolerances may vary slightly; verify dimensions and sealing method (gasket, Oâring, thread sealant) to ensure leakâfree connection. Conclusion: If the other BSP fittings/adapters match the same BSP variant and size, and have at least a 10 bar rating (and proper sealing), they will be compatible with Short coupler with BSP female thread, stainless steel, type VT102.

Can Short coupler with BSP female thread, stainless steel, type VT102 be used in high-temperature industrial piping up to 10 bar?

Short coupler with BSP female thread, stainless steel, type VT102 is made of AISI 316 stainless steel and rated for a working pressure of 10 bar, so it is suitable for use up to that pressure. However, suitability for high-temperature service also depends on the actual temperature: AISI 316 retains strength at moderately elevated temperatures, but its pressure-temperature ratings change with temperature and specific joint, gasket and thread sealing performance may be affected. The provided description gives no maximum temperature or pressureâtemperature chart, nor details on thread sealant or installation method. Before use in high-temperature piping, verify the manufacturer's maximum operating temperature, pressureâtemperature derating, and compatibility of seals and joint designs for your exact service conditions.

Does Short coupler with BSP female thread, stainless steel, type VT102 require special sealing for 10 bar applications?

Short coupler with BSP female thread, stainless steel, type VT102. does it require special sealing for 10 bar applications? Short coupler with BSP female thread, stainless steel, type VT102 uses a BSP (British Standard Pipe) female threaded connection. BSP threads are tapered (BSPT) or parallel (BSPP); sealing method depends on which type and on joint design. The product description does not state the thread form or builtâin seal, so you should assume standard precautions: - If the thread is BSPP (parallel) it typically requires a gasket, Oâring, or flat sealing face to achieve a pressureâtight joint. Without a dedicated sealing surface you must use a suitable seal (rubber Oâring, bonded washer, or pipe washer) rated for 10 bar and compatible with the conveyed medium and temperature. - If the thread is BSPT (tapered) it often seals on the threads themselves; however, for reliable 10 bar performance you should still use an appropriate thread sealant (PTFE tape, anaerobic pipe sealant, or hemp + paste) compatible with stainless steel and the fluid. Some critical or hazardous applications may require mechanical backup (e.g., flat gasket or retaining nut). - For stainless steel AISI 316 at 10 bar, materials are suitable, but sealing must be chosen for chemical compatibility, temperature, and pressure cycles. Recommendation: Verify with the manufacturer the exact thread type and whether the coupler includes an integrated sealing face. If not specified, use an appropriate seal: BSPP â gasket/Oâring rated for â¥10 bar; BSPT â approved thread sealant (PTFE tape or liquid sealant) compatible with the service. For safety or regulated systems, follow applicable standards and consider pressure testing after assembly.

Short coupler with BSP female thread, stainless steel, type VT102

Additional information

Material	SS – stainless steel

Short coupling with internal BSP thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NM-VT102-04	Short coupling with 1/4" BSP thread, AISI 316	-	10	In stock	Enquiry
NM-VT102-06	Short coupling with GW 3/8" BSP, AISI 316	-	10	In stock	Enquiry
NM-VT102-08	Short coupling with 1/2" BSP thread, AISI 316	-	10	In stock	Enquiry
NM-VT102-12	Short coupling with 3/4" BSP thread, AISI 316	-	10	In stock	Enquiry
NM-VT102-16	Short coupling with 1" BSP thread, AISI 316	-	10	In stock	Enquiry
NM-VT102-20	Short coupling with GW 1.1/4" BSP, AISI 316	-	10	In stock	Enquiry
NM-VT102-24	Short coupling with GW 1.1/2" BSP, AISI 316	-	10	In stock	Enquiry
NM-VT102-32	Short coupling with 2" BSP thread, AISI 316	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Short coupling with internal BSP thread for use in piping connections of industrial installations. Material: AISI 316 steel. Working pressure: 10 bar. The given dimensions are indicative and may vary slightly depending on the manufacturer.