Is the Quick coupling socket 45Â° for injection molds with hose end with valve, DYROS series 80 compatible with fluids other than cooling liquids and compressed air?

Quick coupling socket 45Â° for injection molds with hose end with valve, DYROS series 80 is primarily designed for cooling liquids in plastic processing, compressed air systems, gas cylinders, and other technical fields. Its construction.brass body, stainless steel retaining rings/springs/balls, and Viton sealing.allows compatibility with a range of media beyond water and compressed air. Viton offers good chemical resistance to many oils, fuels, hydraulic fluids, and some solvents; brass and stainless steel are generally resistant to hydrocarbons and non-corrosive fluids. However, compatibility depends on specific fluid chemistry, temperature, and pressure (working pressure 15 bar). Aggressive acids, strong bases, certain amine-containing or highly oxidative solvents, and some aromatic/halogenated solvents can attack Viton or brass. For safety and longevity, verify the exact fluidâs chemical compatibility with brass and Viton and ensure operating conditions (temperature, pressure, presence of additives) are within acceptable limits. If in doubt, consult the fluid manufacturerâs compatibility data or request supplier confirmation before use.

Quick coupling socket 45° for injection molds with hose end with valve, DYROS series 80

Q: Can the Quick coupling socket 45Â° for injection molds with hose end with valve, DYROS series 80 be used with aggressive chemicals or solvents?

The Quick coupling socket 45Â° for injection molds with hose end with valve, DYROS series 80 offers good resistance to many aggressive chemicals thanks to brass construction, treated stainless steel internal parts and Viton seals. Viton (FKM) provides strong chemical resistance to oils, fuels, many solvents and acids, and the metals used resist corrosion in typical cooling, air and gas applications. However, compatibility depends on the specific chemical, its concentration, temperature and exposure time. Highly oxidizing acids, strong alkalis, some chlorinated solvents or halogenated compounds may attack brass or degrade seals. For critical or continuous use with aggressive solvents, verify the exact chemical compatibility (concentration and temperature) with the manufacturer or consult a chemical compatibility chart before use.

Q: Does the Quick coupling socket 45Â° for injection molds with hose end with valve, DYROS series 80 require specific maintenance intervals?

The Quick coupling socket 45Â° for injection molds with hose end with valve, DYROS series 80 does not mandate special or unusually frequent maintenance intervals beyond standard practice for brass/stainless-steel quick couplings used with cooling liquids, compressed air and gases. Recommended maintenance guidance: - Regular visual inspection: check for external damage, corrosion, wear or deformation of threads, hose end and valve components; do this before each production shift or weekly in low-use environments. - Seal inspection/replacement: viton seals should be inspected for cracking, hardening or swelling; replace seals if any deterioration is seen or at least every 6â12 months depending on operating conditions (temperature, chemical exposure). - Functional test: verify valve operation and leak-tightness under working pressure (up to 15 bar) after installation and periodically (monthly or per production cycle risk assessment). - Cleanliness: flush and clean internal passages if used with contaminated or particulate-laden fluids; frequency based on fluid cleanliness (e.g., monthly or each maintenance shutdown). - Lubrication: no routine lubrication required for brass body; light lubrication of moving parts only if manufacturer recommends compatible lubricant with viton. - Retaining rings, springs and balls: inspect for wear/corrosion during scheduled maintenance (e.g., quarterly or semi-annually) and replace if function is impaired. - Recordkeeping: document inspections, replacements and leak tests to set tailored intervals based on real-world performance. Adjust intervals for heavy use, aggressive fluids, high temperatures, or safety-critical applicationsâthen increase inspection and seal replacement frequency. If available, follow any manufacturer-specific maintenance recommendations for the DYROS series 80 as the baseline.

Quick coupling socket 45° for injection molds with hose end with valve, DYROS series 80

Additional information

Material	B – brass (bronze)

Quick coupling elbow 45° DYROS series 80 with hose end and shut-off valve. Designed for cooling liquids in plastic processing, compressed air systems, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
DY-VK819-45	45° socket DN 13 with end for 3/4" hose, with valve	20	15	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling elbow 45° DYROS series 80 with hose end and shut-off valve. Designed for cooling liquids in plastic processing, compressed air systems, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.