Is the Rotary joint with BSP male/BSP female, stainless steel, type AK suitable for continuous use at 30 bar with Viton seals?

Yes. Rotary joint with BSP male/BSP female, stainless steel, type AK is suitable for continuous use at 30 bar with Viton seals. The product specification lists working pressure up to 30 bar and Viton (FKM) as the sealing material; the body material AISI 316 stainless steel is compatible with industrial wash-gun environments and provides corrosion resistance. Ensure correct installation, proper lubrication if recommended, and that operating temperature stays within Vitonâs safe range (typically â20 Â°C to +200 Â°C, depending on compound). Also verify fluid compatibility with Viton for your specific detergent/chemical and check for any pressure spikes or mechanical stresses beyond continuous 30 bar.

Can the Rotary joint with BSP male/BSP female, stainless steel, type AK be used in wash guns handling hot chemicals with Viton seals?

Yes - the Rotary joint with BSP male/BSP female, stainless steel, type AK can be used in wash guns handling hot chemicals if the chemicals are compatible with Viton (FKM) and temperatures stay within Vitonâs limits. The joint is AISI 316 stainless steel, rated to 30 bar, and uses Viton sealing. Viton resists many hot chemicals (oils, fuels, many acids/alkalis) and performs well up to about 200â230Â°C (short-term higher). However, it is not compatible with strong amines, certain ketones (e.g., acetone), some chlorinated hydrocarbons, and concentrated nitric acid. Confirm the specific chemicals and operating temperature; if they fall within Vitonâs chemical and temperature compatibility, the Rotary joint with BSP male/BSP female, stainless steel, type AK is suitable.

Can the Rotary joint with BSP male/BSP female, stainless steel, type AK be installed on existing wash gun hose fittings without modifications?

Yes. the Rotary joint with BSP male/BSP female, stainless steel, type AK is specifically designed for installation at the hose connection point of industrial wash guns (wash guns) where rotation is required. Its features match typical wash-gun hose fittings: - Threading: internal BSP and external BSP threads are standard BSP sizes used on wash-gun hose fittings, enabling direct connection to existing BSP male or female counterparts. - Material and sealing: AISI 316 stainless steel construction and Viton sealing are suitable for wash-gun environments and common cleaning fluids. - Pressure rating: rated up to 30 bar, compatible with typical wash-gun operating pressures. Therefore, in the vast majority of cases the Rotary joint with BSP male/BSP female, stainless steel, type AK can be fitted to existing wash gun hose fittings without modifications. However, ensure the specific BSP thread sizes on your gun and hose match those of the rotary joint and verify compatibility with your fluid, pressure, and temperature conditions before installation.

Rotary joint with BSP male/BSP female, stainless steel, type AK

All products, Low-pressure water spray guns/

Additional information

Material	SS – stainless steel

Rotary joint AK with internal BSP thread and external BSP thread designed for installation in industrial guns, particularly in wash guns at the hose connection point, where rotation is required due to the operation of the gun. Material: AISI 316 steel. Working pressure: up to 30 bar. Sealing: viton.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AK-SWR-09-08	Rotary joint DN9, G 1/2"/BSP 1/2" female, AISI 316	-	30	In stock	Enquiry
AK-SWR-09-12-08	Rotary joint DN9, G 3/4"/G 1/2" BSP, AISI 316	-	30	In stock	Enquiry
AK-SWR-12-12	Rotary joint DN12, G 3/4"/BSP 3/4" GZ, AISI 316	-	30	In stock	Enquiry
AK-SWR-14-12-08	Rotary joint DN14, G 3/4"/BSP 1/2" GZ, AISI 316	-	30	In stock	Enquiry
AK-SWR-18-16	Rotary joint DN18, G1"/G1" BSP, AISI 316	-	30	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Rotary joint AK with internal BSP thread and external BSP thread designed for installation in industrial guns, particularly in wash guns at the hose connection point, where rotation is required due to the operation of the gun. Material: AISI 316 steel. Working pressure: up to 30 bar. Sealing: viton.