Does the Nickel-plated brass tee "L" with GZ BSPT/2xGW BSP, type A13 require thread sealant for safe use at 60 bar?

Yes . use a sealant appropriate to the thread types to ensure safe, leakâfree operation at 60 bar. Reasoning: - Nickel-plated brass tee "L" with GZ BSPT/2xGW BSP, type A13 has one tapered external BSPT thread (GZ) and two cylindrical/internal BSP threads (GW). - Tapered BSPT requires a thread sealant such as PTFE (Teflon) tape or a pipe thread paste to achieve pressure-tight joints. - Cylindrical BSP ports rely on metal crush seals (aluminum or copper washers) or dedicated Oârings; they do not seal reliably with tape alone. - Use sealants and washers rated for pneumatic service and compatible with brass, your working pressure (60 bar), and the conveyed medium. Tighten to manufacturer torque recommendations to avoid damage. Summary: Apply PTFE tape or approved thread sealant on the BSPT male taper; use aluminum/copper washers or specified sealing elements for the BSP female connections.

For the Nickel-plated brass tee "L" with GZ BSPT/2xGW BSP, type A13, which thread sealing method is recommended for safe 60 bar pneumatic connections?

For the Nickel-plated brass tee "L" with GZ BSPT/2xGW BSP, type A13, intended for pneumatic connections at up to 60 bar, use the following thread sealing methods: - On the GZ BSPT (external tapered) thread: use PTFE (Teflon) tape or a suitable pipe thread sealant compatible with pneumatic systems and brass. Apply tape in the direction of threading, 3â5 wraps, avoiding excess that could enter the air line. - On the 2x GW BSP (internal cylindrical) threads: use metal sealing washers (aluminum or copper) sized to the fitting, compressed between mating faces to form a pressure-tight seal. Do not rely on tape or paste on cylindrical threadsâuse washers or an appropriate Oâring if the mating part is designed for it. Ensure all sealing materials are rated for 60 bar and compatible with compressed air. Assemble fittings cleanly, hand-tighten, then finish to recommended torque for brass fittings to avoid deformation. After assembly, pressure-test the system for leaks before service.

Nickel-plated brass tee “L” with GZ BSPT/2xGW BSP, type A13

Q: Is thread sealing required for the Nickel-plated brass tee "L" with GZ BSPT/2xGW BSP, type A13 when used with pneumatic hoses at 60 bar?

Yes. For the Nickel-plated brass tee "L" with GZ BSPT/2xGW BSP, type A13 used with pneumatic hoses at 60 bar, thread sealing is required. The tee has one tapered BSPT external thread (GZ BSPT) - use PTFE (Teflon) tape or liquid thread sealant on that tapered thread. The two cylindrical/internal BSP threads (2x GW BSP) require sealing with appropriate metal washers (aluminium or copper) or compatible Oârings as specified by the hose/component manufacturer. Ensure correct sealant type and proper assembly torque for pressure-rated, leakâfree joints.

All products, Threaded pneumatic fittings/

Additional information

Material	B – brass (bronze)

L-shaped tee 2x internal BSP thread, 1x external BSPT thread type A13, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers. Material: nickel-plated brass. Working pressure: 60 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2113001	L-shaped screw tee A13, GZ BSPT 1/8" / 2 x GW BSP 1/8"	-	60	In stock	Enquiry
MW-2113002	L-shaped screw tee A13, GZ BSPT 1/4" / 2 x GW BSP 1/4"	-	60	In stock	Enquiry
MW-2113003	L-shaped screw tee A13, GZ BSPT 3/8" / 2 x GW BSP 3/8"	-	60	In stock	Enquiry
MW-2113004	L-shaped screw tee A13, GZ BSPT 1/2" / 2 x GW BSP 1/2"	-	60	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

L-shaped tee 2x internal BSP thread, 1x external BSPT thread type A13, intended for connecting pneumatic components (including hoses) together. The tightness of the connection usually requires the use of additional seals. In the case of tapered threads, Teflon tape or sealant is used; for cylindrical threads, aluminum or copper washers. Material: nickel-plated brass. Working pressure: 60 bar.