Is the Nickel-plated brass tee "T" with GZ BSPT/2xGW BSP, type A12 suitable for 60 bar pneumatic systems and which sealant is recommended for its BSPT/BSP connections?

Yes . the Nickel-plated brass tee "T" with GZ BSPT/2xGW BSP, type A12 is suitable for pneumatic systems rated to 60 bar, because its specified working pressure is 60 bar. Ensure the rest of your system (hoses, fittings, seals) is also rated for 60 bar and that installation is correct. Recommended sealing: - For the tapered external BSPT (GZ BSPT) thread: use PTFE (Teflon) tape or a suitable anaerobic/paste thread sealant compatible with brass and compressed air. Apply tape clockwise (as seen from the male end) 2â4 wraps, avoiding excess that could enter the line. - For the two cylindrical internal BSP (GW BSP) female threads: use flat aluminum or copper sealing washers or appropriate bonded seals (if the mating male parts have a sealing face). Do not use PTFE tape on cylindrical (parallel) threads unless the mating connection seals by an Oâring or washer. Installation notes: handâstart threads, tighten to recommended torque of mating fittings, and test leakâtightness at working pressure before service.

Can Nickel-plated brass tee "T" with GZ BSPT/2xGW BSP, type A12 be used with pneumatic hoses at 60 bar and which sealants fit BSPT/BSP joints?

Yes - Nickel-plated brass tee "T" with GZ BSPT/2xGW BSP, type A12 can be used with pneumatic hoses at 60 bar if the rest of the system (hoses, fittings, clamps) and installation meet that pressure rating. The fitting description lists working pressure: 60 bar. Note the connection tightness: for the tapered external BSPT thread use PTFE (Teflon) tape or a suitable thread sealant; for the two cylindrical internal BSP (parallel) threads use aluminum or copper sealing washers (or O-rings if the mating part is designed for them). Ensure correct tape/sealant application and compatible materials (avoid sealants that attack brass or the hose material) and verify thread form match to prevent leaks.

Can Nickel-plated brass tee "T" with GZ BSPT/2xGW BSP, type A12 be safely used with pneumatic fittings at 60 bar and which seals work?

Yes. Nickel-plated brass tee "T" with GZ BSPT/2xGW BSP, type A12 can be used with pneumatic fittings at up to 60 bar, provided correct sealing method and installation are followed. Key points: - Pressure rating: The product specifies working pressure 60 bar, so the base material and body design are suitable for that pressure when fittings and hoses are compatible. - Thread types and sealing: - BSPT (tapered external thread, GZ BSPT): requires a thread sealant such as PTFE (Teflon) tape or liquid/pipe thread sealant. These create a pressure-tight seal as threads wedge together. - BSP (parallel/internal threads, 2x GW BSP): these cylindrical threads do not seal by thread form alone and typically require a flat sealing washer or crush ring. Use aluminum or copper washers sized for the BSP female port to obtain a reliable seal. - Materials compatibility: Nickel-plated brass is common in pneumatic fittings. Ensure mating fittings (material, plating) and hoses are compatible to avoid galvanic corrosion or mechanical mismatch. - Installation tips: - Apply PTFE tape/sealant correctly on BSPT male thread (wrap in direction of thread, avoid over-wrapping). - Use proper aluminum or copper washers for the BSP female connections and tighten to manufacturer torque recommendations to avoid deformation or leaks. - Do not rely on thread sealant alone for cylindrical BSP joints. always use the appropriate washer. - Safety margin: Confirm that all connected components (hoses, valves, fittings) are rated â¥60 bar and that working temperature and media are within material limits. - If uncertain, consult the component manufacturers or a qualified hydraulic/pneumatic technician. Conclusion: Nickel-plated brass tee "T" with GZ BSPT/2xGW BSP, type A12 is usable at 60 bar with PTFE tape or liquid sealant on the BSPT tapered thread and aluminum or copper washers on the BSP cylindrical threads, plus proper installation and compatible, rated mating components.

Nickel-plated brass tee “T” with BSPT male / 2x BSP female, type A12

All products, Threaded pneumatic fittings/

Additional information

Material	B – brass (bronze)

Tee “T”, 2x BSP female thread, 1x BSPT male thread, type A12, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-2112001	Tee T screw-in A12, 1/8" BSPT male / 2 x 1/8" BSP female	-	60	In stock	Enquiry
MW-2112002	Tee T screw-in A12, 1/4" BSPT male / 2 x 1/4" BSP female	-	60	In stock	Enquiry
MW-2112003	Tee T screw-in A12, 3/8" BSPT male / 2 x 3/8" BSP female	-	60	In stock	Enquiry
MW-2112004	Tee T screw-in A12, 1/2" BSPT male / 2 x 1/2" BSP female	-	60	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Tee “T”, 2x BSP female thread, 1x BSPT male thread, type A12, intended for connecting pneumatic components (including hoses) to one another. A tight connection usually requires additional sealing: PTFE tape or sealant for a tapered thread, or aluminum or copper washers for a parallel thread. Material: nickel-plated brass. Working pressure: 60 bar.