Is the Thermoplastic hose with aramid and steel braid FK0100 suitable for hydraulic oil at -40Â°C to +93Â°C and for compressed air up to +65Â°C?

Yes. Thermoplastic hose with aramid and steel braid FK0100 is suitable for hydraulic oil across the stated temperature range of -40Â°C to +93Â°C. It is also suitable for compressed air but only up to +65Â°C, as the operating temperature for water and air is limited to +65Â°C. Ensure you select the correct hose diameter to meet required working pressure (175â500 bar depending on diameter).

Can Thermoplastic hose with aramid and steel braid FK0100 be used for fuels and water-based fluids within -40Â°C to +93Â°C?

Yes. Thermoplastic hose with aramid and steel braid FK0100 is suitable for fuels and water-based fluids within the stated temperature range. It is designed for hydraulic oil installations, gases, air, fuels and water-based fluids; its operating temperature is â40Â°C to +93Â°C (note: for water and air the limit is +65Â°C), and construction (polyester inner layer, aramid + steel braid reinforcement, micro-perforated polyurethane outer layer) supports those applications and pressures.

Can Thermoplastic hose with aramid and steel braid FK0100 handle pressures up to 500 bar for hydraulic oil?

Yes. Thermoplastic hose with aramid and steel braid FK0100 can handle pressures up to 500 bar for hydraulic oil, provided you select the correct hose diameter. The product specification states a working pressure range from 175 bar to 500 bar depending on diameter; therefore some sizes are rated to 500 bar. Ensure the chosen diameter corresponds to the 500 bar rating, and operate within the temperature limits (â40Â°C to +93Â°C for hydraulic oil). Follow manufacturer installation, assembly, and safety guidelines, and verify the exact pressure rating on the hose datasheet or label before use.

Thermoplastic hose with aramid and steel braid FK0100

All products, Thermoplastic hoses/

Additional information

Material	PEE – polyester
Maximum operating temperature [°C]	93
Minimum operating temperature [°C]	-40
Vacuum resistance	check

Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MC-FK0100B-05	Thermoplastic hose FK0100B 3/16"	5	500	In stock	Enquiry
MC-FK0100C-06	Thermoplastic hose FK0100C 1/4"	6	500	In stock	Enquiry
MC-FK0100D-08	Thermoplastic hose FK0100D 5/16"	8	450	In stock	Enquiry
MC-FK0100E-10	Thermoplastic hose FK0100E 3/8"	10	425	In stock	Enquiry
MC-FK0100F-13	Thermoplastic hose FK0100F 1/2"	12	350	In stock	Enquiry
MC-FK0100G-16	Thermoplastic hose FK0100G 5/8"	16	225	In stock	Enquiry
MC-FK0100H-19	Thermoplastic hose FK0100H 3/4"	20	200	In stock	Enquiry
MC-FK0100I-26	Thermoplastic hose FK0100I 1"	25	175	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based fluids. Inner layer: polyester. Reinforcement: aramid braid + steel braid. Outer layer: micro-perforated polyurethane. Working pressure: from 175 bar to 500 bar, depending on hose diameter. Operating temperature: from -40°C to +93°C (for water and air up to +65°C).